3-in-1 Mount Stand – CTA Multi-Flex Tablet Base and Support Installs on Walls or Folds for iPad 10th Gen 10.9" - 7/8/9 Gen 10.2” - Air 4 - Pro 11” - Galaxy Tab S3 - Silver (PAD-KMSB)

It truly is a 2 in 1 product and am very pleased with it's design, purpose and packaging! Easy to install too!I bought it to mount on the wall in front of my treadmill so that I could place my tablet at eye level and see a movie or videos while walking and not having the angle and/or vibration of the treadmill affect my viewing. I really liked the additional option of being able to mount it under a cabinet as well so then I can just take the stand part with me with the ipad still attached and insert it under the cabinet with the second holder and bring up a recipe to cook!In the box, the arm comes fully assembles along with two (2) separate white hard plastic mount pads for inserting the bifurcated "foot/arm" when one wants to use it either on the wall (vertically) or under a cabinet (horizontally) as pictured. Along with the mounts came a set of screws and plastic wall anchors (2 sets, 1 for each mounting pad) which I used for my painted plastered wall as well as set of three (3) hex keys of different sizes for adjusting arm pivot tension and a swivel base containing the spring tension clip that attaches to the end of the arm and is used to grip the tablet at two (2) points.[Note: the largest tablet (by size and weight) the padded spring clip will accommodate, albeit tight, is a thin-sleeved iPad4 (which I use) but it is fully adjustable for smaller pads/tablets ( I have also have and tested an e-reader similar to the Amazon Fire and a an obsolete HP Touchpad (heavy)]The only tools I used were an electric drill, a drill bit and medium phillips-head screwdriver for installation to the wall. Instructions were included but I didn't use it however I did notice the instructions included didn't give what size drill bit to use but that was easy to figure out.The mounting pads use two screws each that are situated at the top and bottom of the pad along it's length (vertically) and when screwed into the wall, the screws are flush with the mounting pad so that the "foot/arm" will not rub or be hindered by the screw heads.The installation was very simple and when used as a stand , the bifurcated foot splits apart to act as a foot and the arm s completely adjustable to any height or angle as well as having a 360 degree rotating mount for the tablet so you can view your tablet vertically or horizontally. Fully folded against the wall, the (immovable) rotating mount (highest/ thickest point) is about 3 1/2 inches away from the wall but remember, the arm is removable and then only the white mounting pad would be left on the wall.With minor installation and full adjustability, this is a well-designed product that is well-packaged and reasonably priced for it's multiple purposes.Suggestion: maybe the company could sell additional mounting pads separately for other places in the home (garage/laundry room) or even for work ( if allowed to install on a wall).[Note: after extended use (3 months) I noticed that with my iPad, because of its weight, I do have to use the hex keys occasionally to tighten the middle position in the arm, but it isn't a bother for me]

This is a great product. Very stable. Easy to tighten up if it gets worked loose. Super stable.The ability to hang it upside down is really kinda cool - I installed the bracket under the upper counters in the kitchen, keeping my ipad off the counter.What set this product apart for me was that I could order an extra set of hangars. I'm going to order them this week so I can hang the ipad off a bookshelf next to my treadmill and one next to my bed - keeps the ipad handy but off the minimal open horizontal space I have in those areas. This was what made me choose this product over others, actually.If the stand seems to loosen up and not hold like you want it to, it's really easy to tighten up. Just pop off the little covers that are over the ends of the hinges, use an allen wrench to tighten the hinges, then pop the covers back on. Just don't overtighten - snug is good.Would easily buy another and might get one for my dad for his birthday coming up.

Have had this for a few weeks now. Love it overall. It holds your device (I use it with 3 different iPads and 2 different Fire tablets) securely and gives a pretty good range of motion to allow you to position your device. I wish it had one more axis of movement, side to side. But I can't complain too much about that as it works very well.I also wish you could buy more of the brackets that you mount so I could put mounting points around the house. I may purchase another one just so I can have 4 spots around to mount my devices to.My pros for this device - the part that holds the device unclips from the rest of the mount which allows you leave the mount and just take your device down; very sturdy mounting; very easy to install (and everything is included that you need; two mounting sleeves are included - nice touch.My only two drawbacks are 1) the lack of a left/right axis for swiveling the device; and 2) the iPad Pro 12.9 is a VERY tight fit with the holder spread all the way open, so much so that you cannot really lock the device and I do not feel comfortable with that device in the holder.Overall I am very happy and would recommend buying this mount if you are in the market for something like this. True rating abut 4.4 stars.Update - I see you can buy some extra mounting sleeves. Will be buying another full mount and another 2 pack of sleeves so I can have devices mounted around the house.

Ficou perfeito para minha ZenScreen. Quem tem tela portátil sabe a dificuldade de achar um suporte para elas que não seja comprado da china (aliexpress). A Amazon esta de parabéns por fornecer produtos da marca CTA aqui no Brasil. Sobre o Suporte, ele é tudo o que promete e mais ainda, sobre a abertura (tamanho do tablet/tela), o manual diz 22.5cm, mas ainda tem uma margem de erro nesse valor, ate quase uns 24cm vc consegue abrir. Então recomendo imensamente para quem tem telas portáteis, e é claro. Tablets que é o objetivo principal do suporte.

The media could not be loaded.  En general es bueno pero esperaba más por el precio. El material del soporte es resistente, la base que va a la pared me da un poco de duda porque es de plástico pero hasta ahora a funcionado bien.Lo único que no me agrado mucho es que en cierta posición el brazo no aguanta el peso de ipad y se comienza a bajar sólo. Quitando éso y lo de la base de plastico sí lo recomiendo.

This is superb. A really sturdy solid and functional stand for a tablet. My 12.9 or 11 inch iPad look awesome in it. The clip to detach it from the stand is solid and easy to use. You then get two clips for a wall mount which turn it into a tv bracket for your tablet. It’s brilliant!!! I bought it for my motorhome but I use the stand all over my house. 5 star in build quality, 5 star because it’s a wall mount and stand and 5 star because it’s just a great product.

I’ve had this item for a week now and it’s absolutely amazing, it’s so versatile, I’ve used it in every single way that it could possibly be used and even more. It’s very industrial, and works as such and the one difference between this and every other one is you can maintain it when it loosens, it also comes with Alan Keys so you can always maintain it, if it ever starts to get loose and starts to lower all you do is pop off one of the little plastic caps, tighten with the Allen key and it’s brand new again. This is maintainable and I would highly suggest buying this item.The one NEGATIVE thing is that the wall mounts are very very tight even if you put the plugs in the walls after time I could see it wiggling out of the wall if you take it in and out often, I’d suggest maybe a flat plank of wood if you’re doing it on drywall then screw it in, but they need to make it a little looser and have a snap in or something that doesn’t require so much force.

Actualización: la sigo recomendando, no la trato con delicadeza y sigue como nuevo cada una de las piezas, ya rebasó el año, aumentó el precio de cuando la compré pero la verdad vale la pena, todas las piezas de excelente calidadTiempo de uso al momento: aprox 3 meses. Una de las mejores compras, eso si es un poco grande, pero a mi me funciona al 100, lo uso en la cocina como pedestal, tengo un mini teclado Bluetooth así que es como si fuera una mini pc, la lo uso con mi iPad, tiene un case grueso y aún así fácilmente la puedo poner y quitar, las articulaciones si se aflojan trae las herramientas para de nuevo apretarlas, excelente producto todo de metal, excepto la pinza donde va el dispositivo