Heating Pad Compatible with iPad iPhone Smartphone LCD Screen Separator Machine Repair Tools Heat Plate

Bought this to repair broken iPads. I have had enough of using a blow dryer or heat gun to try to loosen the glue on the iPads and phones I repair. And I repair plenty of them, as my wife/kids (ok, me, too) will punch, drop, leave on the car and drive away, kick, sit on or otherwise destroy iPads, phones, etc. on occasion and break the screens. I wish I was kidding on all the ways we've managed to break these expensive ("expensive as F") devices. First off, this thing is from China. There is Chinese writing all over it, so I'm guessing this wasn't "made in the USA." Safe assumption it is from China. That said, the shoes, underwear, socks, etc. are probably made in China or from the region. The surface area of this heater is more the enough for an iPad (shown is an iPad Air2), as you can see on the screen. You have about 15" X 8.75" Take off the goofy angle at which the pad is cut on the bottom left (and take out the area of the black control module), and you still have 12" X 8.75". This is a nice size. There is a built-in timer on the unit. You start off by getting 99 minutes of heating time. You can adjust this throughout the heating process. So this unit doesn't catch fire and burn my house down, I unplug the heater after each use. If you're not used to metric measurement, you'll be Googling a temperature conversion table. To safely loosen the glue on a phone or iPad, you're looking at 60 degree Celsius/140 degree Fahrenheit. The default heat setting is 60 degree Celsius. If you're like me, you will misspell "Celsius to Fahrenheit" conversion when you Google. This puppy will go up to 99 degree Celsius/210 degrees Fahrenheit. This can be dangerous if you're not careful. I debated between this and another unit with lesser reviews (also a few dollars less). I am glad I bought this one. I paid $78 on Amazon, so if you get a better price, it's a bargain. It's worth the money.

i bought this to replace the screen on my ipad pro 10.5" i did not want to use a heating gun, and found out about these heating pads, and it works wonderfully, however you need to be careful, as soon as you plug it in and turn it on, it immediately gets hot, and gets hotter, so you need to program it to be at the temp you want it, and for how long. for tablets the lowest time it goes down to is 5 minutes at 50 F. i put mine at about 160F for ten minutes and that was enough to remove the screen. it comes with an instruction manual so read that thoroughly before you mess around with it. would buy again if i needed, but hopefully not

This heat pad is portable and spacious. Easy to use and heats up quick. No worries about over heating device with the built in adjustable timer for auto shut off. I did notice the temperature going above the temperature I set as it was heating up, so I would just keep an eye on it. I did use the timer so it wouldn't get way too hot, and also so I wouldn't be constantly checking it too soon. It has a nice small seperated storage tray for the tiny screws to keep them safe and seperate. For a large or m9re complicated disassembly I use a seperate numbered tray, but for a simple screen replacement it works great. The rubber type material keeps device from moving around and when the heat is off it is a great place to do you repair work right on it. I really like this heat pad.

Value for the money = maybe - not sure. I agreed that it was an expense worth incurring. It "is" a good idea. It works. It seems well made. The first project that I used it on failed. Probably not due to the heating pad. The pad - quite effectively - loosened the adhesive. I can't be sure as to whether it over heated or under heated the device. Regardless of the competence and/or abilities of the operator, the heating pad did it's part well. I like it. The instructions were readable, logical and relatable. The size is obviously adequate for cellphones - but, it should handle most tablets, too. Once you have accepted that it is worthwhile to replace a battery in a glued together device, then a product like this a way to go. There may be cheaper home grown solutions like your wife's hair dryer - but, mileage may vary. If you feel the need for digital corroboration for the temperature, this product fills the bill. If you wanna go with heating it up till it's too hot to hold - that can work too.

Worked good. Simple enough instructions but I’m a tech person

It heads in seconds, amazing product

The product is just as I expected it would be. The mat is thick and even though it gets very hot, the bottom doesn't seem to be that hot. The mat has a nice grip. The temperature heats and cools rapidly. I bought this to remove my iphone 12 screen which I have been unable to do without it getting too hot but that has nothing to do with the mat.

Affordable and gets the job done well! I have fixed and sold 2 phones so far and have already made my profit back. Interface is very easy and good to use. Makes a weird plastic smell when in use, but yeah other than that its amazing.

かなり高い温度になります。 私はLCDの分解に使用していますが、薬品の反応促進などその他にも色々と使えそうです。

A great heatpad which speeds up component level repair. The only issue I have is when I set it to 50°c initially after a few minutes it beeps and goes to 75°c and I have to lower it back down. Maybe a setting somewhere that I cant find to stop it.

Works well, for those purchasing from australia be aware it has US style plug

Bad quality and heating problems