DSD TECHSH-U09C USB to TTL Serial Adapter with FTDI FT232RL Chip Compatible with Windows 11, 10, 7 and Mac OS

The FTDI drivers are flawless unlike the CP2102 drivers which are old and outdated. Save yourself the headache and trouble and pay 5 more dollars for the FTDI chips, you will thank yourself in the future.The variable voltage selection jumper on this converter is very useful for handling hardware that runs on 3.3V instead of 5V, saving yourself the hassle of buying, owning, and subsequently finding the right voltage TTL reader.The jumpers included on this were also nice.Great value, would buy again, would recommend to anyone looking for a TTL reader.Use case:Reading serial terminal data off an SBC due to bugged OS compilation software (a lot of bootleg, or alternative rpi clones do not have reliable wifi config options when compiling and writing the software to the boot media. Often, these have no video output, so doing any computing becomes impossible. You need one of these to change the settings on the OS after initial boot to connect to your network to SSH into them).

This is a well designed unit at a remarkable low price for what it does. The material quality is top rate. Very convenient item for interfacing a USB port to a serial port. I simply plug it into a USB port on my laptop and use the provided cable to connect the interface unit to the serial interface pins of my microcontroller board. The use of clear plastic to encase the unit is very smart. It allows you to view the LEDs monitoring the Rx and Tx lines to ensure data is transferring properly. Makes programming the microprocessor easy, using the software on my Windows 10 computer. Installing the Win 10 driver was also easy by downloading it from the FTDI website. It also provides the use of 3.3 volt or 5 volt logic by use of a simple jumper on the unit. They also provide a jumper for loop back testing. Highly recommend it.

I needed this to program a Nextron LCD display via a USB port. At first, my Nextron screen showed only lines and static. Then I realized the power jumper was set to 3 volts, and the Nextron required 5 volts. After that, no problems. It just works.

Bought it to flash some receivers for my hobby. Worked like a charm, so far no issues, easily readable by computer and cost isn't that bad. Simple design that works,

I bought this adapter to interface a uBlox Neo-8M GPS module to use as a time reference with PPS to create a stratum 1 NTP server on Windows 10. It powers the GPS with no problem. I soldered a lead to the CD (carrier detect) hole on the PCB and connected it to the PPS output of the GPS module. It works, but be careful. It appears that the RS-232 control signals (CD, CTS, RTS, DTR, DSR, etc) are inverted. So my PPS driver was triggering on the falling edge of the CD signal instead of the leading edge. I was able to compensate for this by using an offset.

I like the switchable voltage levels, either 5v or 3.3. this unit is well made and works with windows without any problems. I purchased this unit after having some problems with other off brand adaptors. happy with the DSD tech brand quality.

I can't tell you how many of these I have bought through the years. I'm just glad they are consistently available.If you need a TTL to USB interface using a genuine FTDI chip, this is an excellent choice.BT Recommended

I've spent over a day trying to get this device working. I even installed the drivers, but still can't get it to work. The lack of instructions makes it far too difficult to setup. I'd much rather buy a different device than to bother with trying to get this one working.