XEWEA11PCS 3/8" Inch Drive Screw Extractor Set with Adapters, Upgrade Multi-Spline Easy Out Stripped Screw Remover Kit, 2-in-1 EZ Out Tool for Removing Rusted, Frozen or Broken Studs, Bolts, Screws

Very useful set to extract transmission drain and fill plugs. An example here is an extracted BMW E90 - 328i transmission drain plug. Due to overall rotation wear and tear, expect these heads not to last long. If one head spins and does not extract the plug, I move on to the bigger head and pound it in, then rotate.Worth every penny. Solved my problems. On the photos: extracted drain plug next to a new BMW transmission drain plug and set of tools used.

Worked perfectly fine! Used to take an aluminum drain bolt out of an aluminum race car oil pan. Definitely recommend

it is 100% for what i needed it for

I was taking apart a 150cc Maddog engine assy. This is one of the 3 bolts holding the brake rotor to the rear hub. As I was removing the bolts, one head snapped off flush with the hub. I looked online and the reviews were good for this extractor kit. It came in today, and I had the broken bolt out in less than an hour. I like the drill sizes are stamped onto each extractor. The extractors are well made, They are heavy duty, not light weights pieces. They come in a nice carrying case. This kit saved me a bunch of money and time.

I recently purchased the XEWEA 25Pcs Screw Extractor Set with high hopes for a reliable and efficient tool to make my repairs easier. Unfortunately, my experience was nothing short of a disaster.Upon using the 5/32 and 1/8 bits for the first time, both bits broke off inside the screw. To add insult to injury, the screw was drilled out to the specified measurements, following the instructions meticulously. This unexpected mishap turned a simple repair into a nightmare, as I now have to undertake the time-consuming and frustrating task of drilling and retapping the bolt hole.The quality of the Chrome Molybdenum Alloy Steel, touted as heavy-duty, proved to be highly disappointing. Instead of providing the strength and durability promised, the bits failed under what should have been standard usage conditions. This not only resulted in a waste of time and effort but also forced me to invest in additional tools to rectify the mess left behind by the XEWEA set.The product's claim to be a "Hex Head Multi-Spline Easy Out Bolt Extractor Set" fell flat on its face, as it clearly couldn't handle the job it was designed for. This experience has left me frustrated and dissatisfied, and I would strongly caution others against considering the XEWEA 25Pcs Screw Extractor Set for any serious repair work. Save yourself the headache and opt for a more reliable and trustworthy alternative.

This Product worked Great with the Broken off Spark Plug Threads left in Engine Head Yet. This Product with a lot of Grab points worked better than the large less grab points. The smaller grab point did not expand the Threads tighter into Spark plug hole. I would recommend this Product.

Can’t wait to use it!! All sizes listed on the sticker in the kit! Easy to access whatever size you need!

These have helped me get broken bolts and the extracting material is great. When using I drill a hole into a screw and tap one of these bits in. They grip really well and work great. They work a little too great and I have a hard time removing the bolt from the extractor as it gets stuck in the bit after removing. I have one bit where it is still attached to the bit and not sure how I can get it off of the bit.

Rescued me from a potentially frustrating task of extracting the end of an air compressor valve that had broken off in the thread of the tank. I inserted one of the proper sized extractors, and within a couple of minutes the stubborn part came off. Quality seems robust and does the job!

no es lo que parece en la foto, esta muy delgadito no alcanza agarrar bien el dado de la media que es, y al contrario lo barre mas

Super werkzeug.hat problemlos geklappt die abgerundete schraube rauszunehmen

Muy completo y todo en buen estado

Rounded my Allen head transmission bolt and this got it out