Glistco Mounting Accessories compatible with Oculus Rift (White, 3-Pack)

So I have loved star treck bridge command and especially beat saber for my vr but my pet cat kept disrupting my games. The problems with having the vr sensors using their normal stands was how my desk would have to be clear and the cat could sit in front of them. I ended up having to have my SO patrol the room for the cat to keep him out of the way of the sensors which was no fun for me, her or our furry friend. I looked up wall mounts for the sensors and these popped up for my two that oculus included and they came with adhesive! The install was suuuper easy and they accommodate the cable as well as the adhesive is good as of right now (about two weeks) so we'll see how well it holds up. Now I was slightly worried about the build being from a 3d printer but the quality and build is totally fine and doesn't feel cheap so that ended up losing no problems. PROS: -Inexpensive -Well built -Color matches sensors -Included a coupon towards future purchases -Easy to install -Has room for the USB cable! CONS: -While not an issue now, the 3d printed material may not hold up to constant sunlight or abuse so if that applies to you take caution -Adhesive Velcro combo could be a weak point in later months. -Has no rgb? (Haha) Since these have been up I feel my tracking is alot better and the cat can't terrorize me :)

As the header says, I mounted these directly on a "popcorn" plaster wall and they're doing great several months later. The adhesive tape is good quality, and the plastic on the mounts seems to be fairly thick and strong. Simple and effective product that I recommend. If you're mounting these on a wall like mine, here's what I recommend: locate where you want them mounted, clean the mounting point on the wall with rubbing alcohol and a lint-free rag (be careful - this can possibly fade or eat away at paint if you aren't careful), press and hold the mount against the wall for 30 seconds while the tape sets, and then do not disturb them for an hour or so.

First off, the product is great for what its designed to do, which is to hold the Oculus sensors still on a flat surface. They seem to have been 3D printed, which isnt a big deal as the plastic itself is very durable. The fact that it comes with 3 is awesome. My only problems come from the sensors themselves as they offer limited movement, but thats not really the mounts fault. But I also found that the velcro like tape that fixates the mount to whatever surface is a little frustrating if you try to move the mount after its already been placed, but this may have been an error on my part. All in all, I would buy this product again if I had to and would recommend it to anyone who wants to put their sensors up without fear of the cord being pulled and changing their positioning.

These work exactly as described. The adhesive is strong -- I'm a little worried about removing it later, but hopefully it won't rip the paint off. These are printed with a 3D printer, in case you didn't read the description -- it's clearly stated. I have a 3D printer, but I figured that this was easier because I'm new at 3D printing and needed these mounts right away. It's a little pricey, but for the amount of work that goes into printing these, the price seems fair to the person who created them. My dad always says, "Never begrudge a person their profit." So, while these are pricey, realize that they take hours to print, then they have to pack them up and ship. So a 2-pack for this price is decent since you'll only likely be buying these once. Great little tool for people without 3D printers or if you do have a 3D printer and don't want the hassle.

Rating this 5 stars because it does exactly what it's supposed to do. These mounts are small, inconspicuous, and fit your Oculus sensors perfectly. The only trouble I had was with the adhesive on the command strips. It just frankly wasn't that sticky, and after only being up on the wall for a day, fell off. I contacted the seller who handled the issue perfectly. Great customer service. All in all, you're buying this for the actual 3d printer mounts, not the adhesive that comes with them. My adhesive strips might have just been defective, or maybe it was user error. Either way, if the adhesive you receive doesn't work, or if you're worried about them not working, then just get something a little bit stronger and cut it to the correct size. Otherwise, this product is perfect and does exactly what it's supposed to do!

I ordered these not really expecting much in the way of quality or sturdiness, but they're perfect. The sensor's mount rod slips into the groove firmly, although there is no audible "snap" it sits securely. The angle of the the slot combined with the articulation range of the sensor itself is just right for my own setup(3 sensor, 10x9ft area) but because the command strips use velcro to snap together you can easily angle the mount itself for a more extreme downward angle if needed. As for the command strips themselves, they stick firmly to the wall. I had to move the position of the entire mount and it unstuck and restuck snuggly to a new location without much effort. Great mounts, would buy again in a heartbeat if I needed another sensor. Very effective and much cheaper than other mounts on the market.

Had the product snap on me as I was installing it, felt and is cheap so do not expect a very sturdy product. Other than that it did the job as intended.

These little things are awesome. I was surprised how small they were when they arrived, but I appreciate this minimalism. And they're obviously 3D printed, which is kind of cool. I appreciate the ingenuity that went into identifying the need for this kind of mount, and designing them. The actual design is great, too. It's easy to put the sensors in, and I didn't have any issues adjusting their height, angle, etc. I especially appreciate liberating my sensors from their bases, since the stock sensor stands have a fairly large footprint, which took up more desk and shelf space than I would've liked. The adhesive strips work great so far, too. I'm not sure why others have had issues - I think they may not have applied the strips correctly. Just be sure to clean the wall and the back side of the mount first, give them time to dry, and be sure to press firmly and hold down for a few seconds when you're applying the strips. I've lived in various dorms and apartments in my life, though, so I'm a seasoned veteran at using the things by this point in my life. The only downside I've encountered is that it took some trial and error to get their placement right when first setting them up. But I'm not going to count this against the product, since it's an engineering limitation inherent to the rift's sensor system. I was able to put the mounts up temporarily with some aggressive masking taping. And I'm glad I did, because I needed to move each sensor a few times before the Rift software accepted their locations as being kosher. All in all, I'm very happy with this product, and recommend it without hesitation.

These are lovely little mounts, I thought I might have issues with being able to swivel the sensor left and right but they work really well if you pull them up and out of the mounts about 1cm. My guess is that over time the mount will loosen up but that can also be easily fixed just by adding tape to the inside of the mount to snug it up and So far I've moved these mounts 4 times with the same Velcro strip and I haven't had any issues nor has the mounts loosened up the grip at all. 10/10 Great mounts and I would definitely buy them again should I ever need them

Works wonderfully and firmly attaches my sensor set up to my wall. Tad bit disappointed in the price considering all it is, is plastic but meh at least now I don't have to permanently screw something into my wall.

It holds the mounts well. Not much to say about it.

Does the job. Easy to install. Velcro doesn't seem a problem but the tape side seem just ok (make sure not to turn the sensor too hard or it might unstick from the wall). But for now can't say I'm unhappy about them

Very happy with these. You may take them out of the box and question the quality, as the print resolution isn't amazing, but that means nothing, don't worry. The fit for the cable and sensor stem itself is nice and snug, and the included 3M Command strips work great and stick to the mount and the wood rafters very well. If you need more downward angle, then you can mount them on an angle like I did, so the generous left/right pivot can give you more downward angle.