

Desertcart purchases this item on your behalf and handles shipping, customs, and support to Malaysia.
๐ ๏ธ Cut like a pro, fit like a boss โ zero clearance, zero compromise!
The Leecraft DL-1U Zero Clearance Table Saw Insert is engineered for professional-grade precision and safety. Crafted from durable phenolic laminate with a bonded melamine surface, it fits a wide range of Delta and other popular table saw models. Featuring adjustable leveling and side screws, a rear safety pin, and a precut blade pocket, it minimizes chip-out and splintering while eliminating hazardous blade gaps. Ideal for millennial pros who demand flawless cuts and a safer workspace, backed by Leecraftโs lifetime warranty.
| ASIN | B0000223VB |
| Best Sellers Rank | #454,144 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #733 in Table Saw Accessories |
| Blade Length | 10 inches |
| Blade Material | High Speed Steel |
| Blade Shape | Round |
| Brand | Leecraft |
| Brand Name | Leecraft |
| Color | Red, Black |
| Customer Reviews | 4.5 out of 5 stars 407 Reviews |
| Global Trade Identification Number | 00670218951021 |
| Handle Material | Plastic |
| Included Components | Leveling screws, side and end adjustment screws, rear safety pin, precut blade bottom pocket, instructions |
| Item Dimensions L x W x H | 8"L x 3"W x 3"H |
| Manufacturer | Leecraft |
| Manufacturer Part Number | DL-1U |
| Model Number | DL-1U |
| Number of Items | 1 |
| Number of Teeth | 50 |
| Other Special Features of the Product | Zero Clearance |
| Power Source | Hand-Powered |
| Special Feature | Zero Clearance |
| Surface Recommendation | Metal |
| UPC | 733353981237 767615491417 670218951021 |
| Unit Count | 1 Count |
| Warranty Type | Limited Warranty |
| Wattage | 72 watts |
J**H
Well worth the price!1
If you work with small and/or angular cuts, a zero clearance insert is an absolute necessity. I considered making one myself but the Leecraft product is near perfect right out of the box. Made from laminate with a bonded-melamine surface, the insert fit nearly perfectly on my 12" Delta Contractor table saw with only minor finetuning to level and align front-to-back and side-to-side. Instructions are clear and easy to follow. If in doubt, you'll find several YouTube videos to walk you through the process. Once aligned, I just taped the insert in place and then slowly cranked the blade up and through the insert (it features pre-cut "notches" on the underside to faciliate blade cut-thru.) You'll need more than one insert to accommodate various miter angles. But for the quality and ease, the price is totally reasonable.
D**.
Way better than anything I could make
Perfect fit for my very old Delta contractor 34-444 table saw. With the 4 "foot" screws and the length and width adjustment screws you can get a very nice fit. Hardest part of installation is cutting a separate slot for the piece behind the blade that holds the blade guard. Bought a second one to use with my dado set.
P**L
Fit my Delta 36-650
Quality table saw insert. Seems to be made from some type of resin or plastic. The insert is thick and feels solid with a smooth formica-like finish on top. The four screws that adjust the height of the insert were sufficient to level the insert with the cast-iron table on my saw. There are two screws, one in the front and one in the side (as opposed to the top or bottom), that you can use to remove in lateral play between the insert and the table. At first the insert slipped right in and was too loose, but by adjusting these two screws I was able to make the fit quite snug. Followed the instructions for the initial cut and everything went great. I plan to buy another insert once I get a dado blade and would buy another one of these Leecraft inserts with no hesitation.
A**R
great product, random colors
This works very well as advertised. the instructions are clear, the quality is good. I would have liked to be able to have a choice of colors. I got brown, which would not be my first choice. I would recommend buying one, but be advised that you will get a random color.
J**R
Should have purchased these years ago!
The original insert that came with my Delta Unisaw suddenly became stuck after roughly 10 years of use. I could not get it out of the saw without bending it. So, it was time to order a new one. I looked at a couple of options - straight from Delta (expensive), the white plastic ones that are a little cheaper, and then this one. I'm so glad I went with this one. They are flat, made out of some wood-type material, and topped with a very smooth coating. There are 4 leveling screws on top, one in the back, and another on the side, so I was able to get it to fit perfectly with no slop. Another great thing about this is there are two pre-made grooves on the bottom, so when you go to raise the blade on your first use, you don't have to use a small dado blade first then your normal blade. I've had to do that on a homemade one a few years back and it's not fun. I bought 2 - one for a normal kerf blade and a second for thin kerf. All said it probably took about 15 minutes per insert to get them ready to go. I'll probably end up getting a third for angle cuts. I seriously wish I had purchased these years ago! Side note - the ones I received were white, not red as the picture indicates (they call that out that color may vary). I didn't mind at all.
J**N
Seems great... how to cut miter throat plate for unisaw however??
ok this is my second one - so i have to append to my original 'review' which you see below. I was DISAPPOINTED this time - hoping I would get a RED ONE like shown in the ad ... but alas I got another yellow which is too bad since i was hoping to be able to identify them from across the room by colour - yellow for straight cuts and red for mitres and dados fit is OK but not as good as my previous one I've used several other plates on other saws (powermatic, general) and this one seems like a keeper. Definitely wouldn't have been worth my time trying to make my own...!! I have one question however... since, in the past I had a custom miter throat plate already made for me... how the HECK do you prep one of these for use in 45 degree miter position?? My unisaw won't crank that low... I would have to butcher the thing since it's sitting at the top of the blade around an inch above the deck height on my unisaw! I'm too freaked out to 'force it down' - worried about reprisal by my blade grabbing...
W**C
Denser than I expected
I wasn't sure what to expect - would it be red like in the product photo, or yellow like some reviewers had received; would it be particle board with laminate or some odd ply/plastic combo; would the pre-cut pocket be in the right place; would it even fit my saw? The woodgrain was unexpected, but a classy touch. What was the most surprising was how dense and heavy this thing is. It's not ply, it's phenolic plastic. HARD stuff. I think it's the same stuff they make billiards balls out of? I like the pre-cut pockets on the underside. Even with my blade all the way lowered into the cabinet, it needed that pocket space (see photo). I followed the instructions as directed, first adjusting the leveling with the table surface and side/front adjustment screws, and then took it slow bringing the blade up through the insert and my clamped scrap 2x4. Good thing too - in fact, as I raised the blade and made some cuts, I lowered it again to allow cooling as it did smoke. I have a very sharp carbide toothed CMT blade that chews through hard maple like butter, but it smoked going through this insert. The dust collector pulled it away, but I did need to open the garage door to air the place out. One thing I wished I had done before cutting is verifying that my blade was at a true 90 degree angle. It was off by less than half a degree when I cut it. So after I thought of it and set it back to exactly 90 degrees, it rubs a little on the cutout. I think it'll wear itself down after a while, but it doesn't seem to want to re-cut that little but when I send the blade back through. The difference is about 1/32nd of an inch, so not a huge deal. This is a much more solid option than the pine, baltic birch and MDF inserts I've made on my own over the years. I like this so much that I ordered a few more so that I can have one for 45 degree bevels and a couple of different dado stack widths.
G**Y
Dado blade insert
Odered one on the sixth of April, shipping was right on time. Was sent a completely different one that i ordered. Replacement sent next day and was the correct part #. Just FYI this was for a Grizzly R1023RL . Fit perfectly after i sanded it to fit. Will not fit from OEM. Good luck!!!
Trustpilot
2 months ago
2 months ago