W B D WEIBIDA 2-inch Low Gravity Center Caster Wheels Heavy Duty Set of 4 | Load Capacity 2200lbs, Durable & Quiet & Sturdy Nylon Wheel, Black Extra Width Plate Swivel Castor with Brake for Industrial

Sturdy little wheels carrrying a lot of weight perfectly gliding with the best part of a ton on the wheels arr not evenly spread due to the nature of the load but its stable

I wanted to fit a new storage shed with wheels so it could be moved for maintenance purposes occasionally, but I wanted to ensure the wheels would take the weight and stand the test of time. I always over engineer so I chose these 4400 lb wheels to be safe and was impressed as soon as they arrived, by both the weight and also the visible quality of manufacture. The wheels are a wide roller style which gives a wider footprint to the floor and helps distribute the weight and also are not too tall as I didn't want the shed lifting too much. The bearings inside the rollers run smooth and the 4 hole fixing plate and wheel frame are are of steel thick enough for the job. Additionally each wheel has it's own brake for convenience if you can't get to some wheels once fitted. Although the wheels come with fixing nuts and bolts, for my application I used my own rawlbolts into the wooden frame but it's a nice touch to supply them. They have been fitted to my shed now for some time and although they don't move often, they work perfectly, the brake is firm keeping the shed solidly in place but releases easily and moves freely when required. As you can see from the photo's they are used on a flat level flagged patio area outside. I have been completely satisfied with the fast delivery and service life so far.

Installed on a large workbench where previous castors had failed. These give the impression they will last. Very solid design.

Seem to do the job. I used these for putting wheels on a fabricated Olympic weight plate rack. I welded them on directly, seem to be very stout. They came with 4.8 rated bolts, pretty cheap and soft for the price, didn't bother me as they went straight in the bin. But 8.8 would have been nice to see for the price of these castors. Obviously with just over 200kg on these, the small diameter makes the thing hard to move around, but they do work and I wanted the 50mm castors to keep the height down. So not a negative point, but something you might want to think about if you're making something heavy which you need to move frequently. In hindsight, I wouldn't have bothered with the brakes, this thing isn't going anywhere unless you're pushing it. I would buy these again.

I put these on the bottom of my 6 foot wardrobe. You need a base I used 15mmx400mm wood each side from back to front. The bolts are too short to go through the wood so I had to counter sink the wood to do up the nut. My carpet is a short pile so it moves ok longer pile might be more difficult

Excellent castors. Free running and brakes effective Good price too.

These low profile castor wheels take a huge weight, move freely. They are made from thick steel plate and the composite castors are tough and wide.

These are much better than I'd hoped for. They are very solid and are HEAVY. I've made a dolly to support my car which has a wheel removed and they move it easily around an uneven yard.

Robuste come descritto.

Ich habe sie für meinen ganz schweren Klappsessel aus den Sechzigern bestellt. Den konnte man ohne größere Anstrengung kaum verschieben. Die Qualität der Rollen ist wie versprochen, die Lager sind vorsorglichgefettet. Top Qualität 🤩👍🏻

Estas ruedas de 50 mm para muebles pesados son justo lo que necesitaba para mover mis muebles sin esfuerzo. Aguantan una carga impresionante de hasta 1000 kg y se sienten muy duraderas gracias al nylon de alta calidad. El sistema de freno funciona perfectamente y las ruedas giran con suavidad, lo que facilita maniobrar en interiores y exteriores. Además, son sorprendentemente silenciosas, algo que valoro mucho. Muy recomendables si buscas ruedas robustas y fiables.

I used these for my rolling tote carts. They are heavy duty and exactly what I needed. I have ordered them multiple times and would for sure order them again.

I bought the 3” version for a custom shelving unit that hold 16 large totes. I used a 4x4 for the bottom to eliminate any sagging. The casters as wider than most which allows for a lower center of gravity. It does not feel off-balanced or top heavy with these casters. They roll extremely well on solid, smooth surfaces like garage or basement floor. They are super sturdy and built like a tank! Great engineering and fabrication. They might be more challenging to roll across a gravel driveway due to the width. For me, they worked perfect. I built several storage units and each one had these casters installed.