Ender 3 V3 SE Double Sided PEO PEI Sheet, Smooth PEO and Textured PEI Magnetic Heated Bed 235 * 235mm for Creality K1C/K1/Ender 3 V3/Ender 3 V3 KE/Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo/CR 10 SE

Got it for my Ender-3 V3 KE. Fits perfect, works way better than the original one, and I was not expecting it to come with a magnetic sheet incase your printer doesn't have one.

The PEI Spring Steel Bed is the “mic drop” upgrade my Ender 3 didn’t know it was waiting for. First off, adhesion is flawless. Prints stick like they’ve found their forever home while printing, and then—like magic—pop right off once it cools. No scraping, no swearing, no praying to the 3D print gods. Just clean, reliable results every time. The double-sided texture is awesome: one side leaves a pro-looking textured finish, the other side gives you a smooth base—it’s like having two beds in one. And because it’s magnetic and flexible, I can just lift, flex, and watch my print slide off like butter. 🧈 The spring steel is tough but lightweight, and swapping it on my Ender 3 was as easy as snapping on a magnet (literally). Now my printer feels like it leveled up from “DIY tinkerer” to “pro shop” overnight. In short: sticky when I need it, effortless release after. This PEI bed is the ultimate quality-of-life upgrade for anyone who loves printing but hates prying. If Cinderella was a 3D printer, this would be her glass slipper.

WOW!! I've had my Ender 3 since 2017 and I don't know why I waited so long to do this.. I've been printing on glass and I loved it for the flatness and shiny first layer but sometimes I would have adhesion issues and I also really wanted a textured first layer more often than not for my "utility" prints. Using a razor to scrape my prints off the glass was frustrating and dangerous. I finally bought this PEI and it not only is super easy to get prints to stick well but man is it nice just popping them off the flexible plate when I'm finished! The kit is nice, easy to use, fits perfectly, and sticks well. I put mine right onto my glass to ensure a flat surface, it also helps with heat retention.

I have bought these for both of my printers. They work great way better adhesion than my old plates, easy to install and no more binder clips

I like this print bed, it’s easy to install and it works great for the price. It fits the Ender 3 perfectly and takes 5 min to install. The magnetic sheet is very strong and the plate is flexible enough to remove prints without losing durability. The one thing I’ve noticed after 3 months of use is that different brands PLA adhere differently to the PEI. The lower quality of PLA seems to fare worse, and will only adhere at temps of 60C or higher on the textured side, absolutely no chance of sticking to the smooth side. Higher qualities of PLA work great on the textured side and ~60% of the time on the smooth side. Overall, I recommend this plate for a cheap and easy upgrade for your Ender 3. My only caveat is the adhesive quality on the smooth side. Keep in mind that my print settings may interfere with this as well.

Great upgrade for my Ender 3 pro. It heats up nicely and parts are easily released when cool. If you can't wait for it to cool, just pop it off the bed and bend it and your part will pop off. I already had a magnetic bed, so installation was just pop off the old one and put this on. it fits the original be perfectly. I have used it for about 2 years with no problems at all.

I bought an Ender 3 Pro, and soon the original magnetic build plate started giving me issues. It was never perfectly flat and level. I bought a fancy borosilicate glass bed and applied a PEI sheet on top of that. This gave me a perfectly flat bed with terrific adhesion, but the problem was sometimes the adhesion was too good and it was difficult to remove parts without marring them or the PEI sheet. In addition, the glass was heavy and limited how fast I could print. And I had to deal with binder clips. I finally got tired of it and started investigating spring steel plates like this one. I read a lot of reviews and could not decide which one to buy. I finally decided on this one because I could get it fairly quickly, and I figured if it was terrible I would return it. I am sure glad I picked this one. Wow. I wish this would have been my very first mod for my printer. I have done a LOT of mods to my printer now, but this is probably going to be at the top of my list for the best ones. The print surface is flat and level, and attaches nicely with the magnet. It is very easy to take the plate off and put it back on. And with a little flex of the plate, prints pop right off. I previously removed the stock magnetic surface from my build plate, so I was glad they included a new one with this plate. It was easy to apply and stuck well. Based on all the previous reviews I read, I was not sure what to expect about this protective film I would have to remove. There was a plastic film stuck over the top that to me, was QUITE clear that it needed to be remove and it was a protective piece of plastic. If anyone can't figure this out, what business do they have owning a 3D printer? Ignore all the other reviews making this sound difficult. It's obvious what needs to be peeled off. Peel it off and move on. After removing the protective film, I started to think there was another layer that needed to be peeled off (all those other reviews were in the back of my head still). But after some careful scraping with a knife in a corner, I decided that was not the case and the only thing left was the PEI itself. The reason I thought maybe more needed to peel off was that there was some damage/pitting on the PEI sheet, but it is all pretty close to the edge and shouldn't really affect printing as I rarely go all the way to the edge. I was going to include some pictures with this review, but that option seems to be gone. Anyways, this is a fantastic build plate and you should buy it!

Excellent upgrade for the print bed from the standard Creality bed. First layers of thin walls stick better for less failed starts. PLA pops right off when the bed cools. Highly recommended.

Sticks to the already magnetic bed of the Ender 3 so installation is not a thing. Stick it down and print on it. Printing PETG on it with no issues, good adhesion and no difficulties removing parts. Sometimes under the print there are micro bubbles but they disappear and apparently is normal for the glue under PEI, no big bubbles and the surface is not affected. I'm gentle when removing pieces as the surface does seem like it would be easy to damage with a tool, but it is a plastic so be smart about it. I like the spring steel. I do wish it was 2 sided (smooth and textured), that would make it a great value.

Original de buena calidad y funcional

定着悪くなったので交換です。 定着よく剥がれないです。

Very sturdy print bed. It's value for Money/

I’ve been printing PLA and PETG with the Creality glass bed. It works great. Perfect first layer every time. However, since I started printing ABS for my Voron build it won’t stick to the glass. Pulled the trigger on this PEI bed. The ABS instantly goes on and stop warping. Despite what other reviewers are saying about the glass bed. I highly recommend it for PLA and PETG. The reason is that the glass bed is way more durable. I am 2 rolls into my ABS and the PEI surface is showing signs of wear. Despite being very careful and letting the parts come off the bed without any force. On the other hand, I am on my second year with the glass bed. This bed would be a no brainer if there is a cheap way to resurface the PEI layer. The other bonus is being metal, it stays on the magnetic bed without needing clips. You get the full 230!