Draper 04992 500Kg Motor Cycle Frame Scissor Lift

I was a bit nervous given some of the reviews.The packaging was fine and everything was in the box. I had expected some assembly but it came all assembled. Nothing looked out of place or damaged.Used it on my 68 Triumph and it is fine. It might touch the exhaust just on one side but only just. Would be able to slot a bit of plywood in if it had been a problem. Seems very sturdy. I left the bike on it for a week whilst I was getting a front tyre changed. Need a suitable socket (19mm I think but not sure). Will be very useful as my bike doesn't have a centre stand. Have also bought a full bike lift/bench and this Pad Lift will be a useful addition to that.

I bought this to lift my Honda CRF250L which (with accessories and fuel) weighs about 150kg.It effortlessly and smoothly lifts the bike and could easily lift more.To raise the lift you connect socket set (with a 22mm socket if i recall) on one side and wind it up.It's very stable in use - although I lift the bike so 1 wheel remains touching the floor for added stability.The best thing about this is it winds down flat (2 inches high) when not in use, so easily stored.The reason I specifically chose this is because my bike has not much ground clearance from the engine and so most MX stands /lifts wouldn't fit under my bike. This one is perfect and also looks to be hard wearing and durable.Highly recommended.

Works well for the size. My Kawasaki Vulcan 1600 Classic was fairly steady while I pulled the front and rear wheels off. I did, however, put a bottle jack under the rear trailing arm to balance it after raising with the liftmaster

Very sturdy and easy to use.

I love working on my bikes, and Wish I had bought this years ago.Postive -- No more back breaking leaning over the bike.Very Stable.Fits most Bikes (not had an issue with 5 of the bikes in my family) Odd Exhaust pipes could be an issue.Packs away nicely when not in use.Very smooth lifting and dropping action.Cons -- No hand crank, Need a large socket and wrench (or airgun in my case)Definately Recomend

OK for £71 delivered but it arrived packed only in a slim box with no padding. Once opened I discovered that one of the upper ball bearings had shattered. Also on raising it I discovered that one end sits 6 mm higher than the other i.e. it is not level. Viewed from the side the platform is on an obvious slope. Note I have allowed for the broken rear bearing in this measurement. I am returning the unit and will see what condition the replacement arrives in. I'm guessing that the 4 bearings may be cheap Chinese pattern parts (though note I have not checked) and as a professional engineer I'm not going to be happy until I have fitted quality bearings on the replacement lift. Certainly I'm not putting my precious bike on it until I'm satisfied. Depending on how out of alignment the replacement is I can rectify the slope by a combination of slightly larger O/D bearings and careful radiussing of the pivot holes at the other end. So as said I'm happy with what I get in basic terms but expecting to put a few more quid and a little bit of effort into it to make it perfect.OK so a few days later Yodel has taken the broken one back to Amazon and they have received it. Smooth service. The replacement has arrived and it is perfect because the three things that I didn't like are good on this one, namely:The 4 bearings on the replacement are all intact.One of the original supports was welded a bit squint, the replacement jack is perfect in this respect.Better still, when raised and loaded the jack is spot on level end to end to within a millimetre. Brilliant!So if you get one and check these items I originally found fault with and they are good then particularly for the money I raised it from 3 stars to 5.

base could be a bit wider

Not very experienced mechanic and new to the biking world, but this lift is great if you are starting out like myself.I am confident to say a experienced users would agree its a great product.I use the lift on my Yamaha Virago 125, and works well. bottom of the frame on my motorcycle isn't flat so the bike moves abit. But not to the point of falling off, this would not be a issue with flat bottom framed bikes, if that makes sense.

I use this for my triumph thruxton, It's very stable and easy to work with. It's very compact when folded. The bike stood very sturdy.I was doubting if i should buy this one or one from Vevor. This Draper has circlips at the connections and I thought Draper is maybe of a higher quality.it needs a 21mm socket to operate, its not included. But if your working on a motorcycle you should have one.

Su resistencia, para elevar la moto que pesa 260kg

É poco più di un crik, ma è potente, solido, affidabile e poco ingombrante, una valida alternativa ai pesanti, costosi e delicati sollevatori idraulici. La piastra di 40cm x 20cm è adatta per alzare diverse moto, uno spesso strato di gomma protegge telaio e carter. Lo uso per sollevare una vecchia Honda Four e una pesante Guzzi California 1100, nessun problema di stabilità, si solleva facilmente con qualsiasi chiave a cricchetto, grazie ad un elementare sistema di leve e cuscinetti, molto più pratico ed economico di qualsiasi crik o sollevatore idraulico.

Kaufentscheidung für mich: Arbeitshöhe: AuflagedlächeEine KTM LC4 Supermoto bekommt sie aus dem Fahrwerk gehoben, von der Arbeitshöhe also kein Problem auch mal die Räder zu wechseln.Und unter eine tiefergelegte 74er Harley kommt man auch ohne Probleme runter, da sehr Flach.Grade für schwere Bikes ist die breite Auflagefläche super, so kann man sie erstmal bedenkenlos anliften und es gibt kein rumgezicke beim anschließenden verzurren.Zusätzlich ist die Auflagefläche gummiert, schont den Rahmen und man spart sich selbst da irgendwas rauf zu fummeln.Material und Verarbeitung ist super.WICHTIG: ich würde sie nicht zum überwintern nutzen ohne das Bike zu verzurren!

Je m' en suis servi pour déposer et remplacer le moteur de ma moto, cet outil est très pratique pour une moto car il est peu encombrant et très costaud, une fois plié il prend très peu de place. Je recommande