MAGZO Backed Adhesive Foam Padding 1/2" Thick x 12" W x 59" L, Black Neoprene Sheets, Closed Cell Foam Sheet Roll

Works as advertised, easy to work with and perfect for our application, backing for a mirror that provided sound dampening and gave the door mount for the mirror a solid feel. No rattles or knocking.

Nice durable and high quality feeling roll of foam. I used it for the case divider I was making for my travel case. It peels and sticks easily. I would buy this product again.

This worked perfectly for me. I had to replace the foam that surrounds the kick plate on my 77 project car. The kick plate has a vent and door on it to allow air in. The existing foam seal that goes around the vent door had dried up long ago. So when it rains, water flows down the cowl drains, it goes inside the fender well and leaks through the kick plat because of the dried up foam. I cut the new pieces out using a utility knife. Luckily 12 inches die was exactly the width I needed. I then applied it to the kick plate the sticky part adhered to the plastic just fine. I installed it, put in the screws then put a garden hose down the cowl. No water got inside. I can now move on to restoring the floor of the car, as I could not do it until the leaks were fixed. The foam does not absorb water. I bought the 59 inch length for additional use on the car. I did not however remember to measure the length prior to my first cut so could not state if it was accurate. I got the 1/4 depth, and it was accurate as well as the width at 12 inches. I had no issue peeling the backing, nor any issue of the adhesive coming off the foam.

I used this for a arm rest cover the adhesive backing isn’t strong enough to hold it down at all edges. Not as strong as sealing tape products. So I guess it depends on use. The top side has a nice feel to the material.

This is great foam. I bought the 1/4” thickness to line my bamboo silverware drawer organizer. This was stiff, making it nice to work with. The backing peeled off easily. Much better than another roll I purchased from a competitor. I will be purchasing more of this product.

This is nice foam padding. I have used it a few times, and so far it has held up well. The foam is fairly firm and dense, which works great for preventing squeaks and rattles in cars.

The adhesive back is not super sticky and the edges continuously lift off the surface. I recommend unrolling the product completely and placing some weight on the corners and edges to flatten it out to help avoid this. Otherwise it’s a fine product.

I bought this to use for two air conditioner units which I do not remove for the winter. The first has those plastic "accordian" side panels which, over the years, deteriorate and start splitting. The foam allows me to completely cover those panels and provide better insulation from the outside weather than the side panels ever did. The second unit, which I never remove because of its weight and size, has sturdier side panels. Still there are the inevitable gaps on all four sides through which cold (or hot) air can penetrate. The foam allows those gaps to be completely covered over and also provides another layer of insulation over the somewhat sturdier side panels themselves. Overall, I'm very satisfied with my purchase. I will have to see how these hold up over time, but so far so good. I only wish that I the "outside" of these foam pads were some sort of white plastic instead of the black foam. Still, not a huge concern and I guess I could buy some sort of stickum vinyl yard goods.