Metal Concealed Hinge Jig with Quick Clamp and Dust Vacuum Adapter Concealed Door Hinge Jig 35mm Cabinet Hinge Jig Hinge Hole Drilling Jig for Woodworking Door Cabinet Hinges Mounting Tool

Excellent jig; very good construction. It comes in a well organized box that you can put everything back in after use. Very easy to use. Made really clean cut hole for the hinge. The drill guide for the screws were spot on and the hinge aligned perpendicular. Very happy with the purchase. Used concealed hinges below, which were a 1" overlay for face frame cabinet. https://www.amazon.com/dp/B0BBQV9VXH?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Well, designed and very easy to use!

This jig is superior to all the lookalikes. Don't let the name throw you off (but I bet it sounds great in Chinese) It has very handy scales, one on top and another on side for setting the drill bit depth. Very handy. It has more offset/tab/ cup drilling distance preset holes than most others and you gain another one by using longer 8mm screw going through the plate. That will give you 7mm tab/offset. If you use no offset screws at all you will get 10mm tab exactly, which is handy because by using one or two 1mm spacer plates you can also get 8 and 9 mm tabs/offsets. And all the tabs are accurate unlike the other jigs. And if you need even bigger tab/offset , just remove the clamp and place the jig anywhere on the flat surface. I often need nice and flat countersink holes in the middle of the beams etc. The vacuum port is removable but once you try it you will not use it without it. Ever. Unless there is no vacuum around. And I didn't even have the correct adapter the first time around, so I just taped regular vacuum hose end to the door close to the gate and still got a total of 4 chips on the floor. You could do it in your living room. Even more importantly it solves the common problem of the drill cups clogging with chips. To a great degree. That is also helped by the design of the cup with bigger clear openings. ALSO!!!! The cup locks in place so you don't have to hold it down which is both safer and more comfortable, leaving your other hand to secure what else needs to be secured. . You can also drill for four different hinge screw hole locations though I found one screw hole setting to be slightly off the center on one of my hinges holes. Still in the hinge holes but just not the center of them. (Note to the manufacturer: The lettering for the two screw holes bushings on each side of the jig insert should be upside down to each other so that we would not have to worry about why the lettering is upside down in two cases. They will know what I mean). Anyway great jig and cheaper too, but I would have paid for it more than for the others. I had good experience with the Kreg hinge jig and needed to upgrade mostly for the offset limitations, but I am positively elated now so I felt I had to write this. Hope this helps with your decision.

The jig worked well for installing concealed hinges. I chose this jig over the Kreg brand because it’s all metal. As others have mentioned, wood chips can get caught in the bore housing, making removal difficult. However, cleaning with a shop vac before removal resolves this issue. The shaft to bearing housing wobbles slightly, but the holes still come out clean, and the hinges install without issues. The housing tends to shift during drilling, so you need to hold it in place to keep it stable. The knurled knobs are great for grip, but be cautious when working on finished cabinets. The knurled surface can damage the cabinet surface. After this happened to one of my doors, using tape resolved the issue. The clamp pad on the toggle clamp can leave impressions, even when reducing the clamp force. Painter’s tape helps minimize this, but slight marks may still appear. Overall, I’m pleased with the jig. This was my first full cabinet build, and it was worth the cost. It’s a valuable tool to add to my collection.

Very good quality tool, worked perfect and easy to use once set up. will be helpful for future projects also

This jig is amazing. It covers all of your install needs, is built like a tank, all needed parts are included, and its markings are precise. I LOVE IT when I find a product that is so smartly engineered. Thank you, GOINGMAKE, whoever you are!

Outstanding performance with all the features you will need for any type of cabinet doors. All holes aligned, even for Euro style dowel holes. Great purchase and more than pays for itself. - Very straight forward and easy to use - Made with all metal parts, built for heavy use and durability - No plastic pieces - Router bit still sharp after 48 holes. Capable of handling another set of 48 holes and more

Solid versatile jig. Eliminates the trial and error process. All metal no plastic. The clamp keeps the jig securely in place. No additional clamps needed to hold jig this in place. Once you know your off set, move the the curl knobs to where they need to be and that's it you're done. It's that quick. This is so much better than using the drill press.

Very high quality, easy to use, accurate. A storage case would have been nice.

Worked perfectly

Goingmake is a hidden gem, have many of their tools/jigs now and all are very good quality

Build quality is good and the hoover attachment helps clear the shavings away quite well.

This jig seems well made and expect it will perform well.