TUSITA Micro Usb HUB Adaptor with Power, 3-Port Charging OTG Host Cable Cord Adapter for Fire TV Stick Raspberry Pi 2 3 Pi Zero Android Smart Phone Tablet Samsung Galaxy HTC Sony Google LG/Linux

Yes it is really working!! After 3 unsuccessful purchases from eBay sellers, I gave a try to this one and it works fine, but with a trick!In the beginning, the charger and the Ethernet adapter weren't working simultaneously, so I begun different conecting combinations. Finally found the correct way which is this: First connect the Ethernet adapter with the switch OTG function on, then connect the already mains plugged in charger to the usb port and reverse the button to the Charger function and.... yes they work simultaneously!!! Charging while wired connected to the internet. The tablet is a Samsung Galaxy S, model: SM-T800, running Android 6.1

I bought this quite a while back but only now just got round to trying it out with my new Amazon Fire TV Cube 2nd Gen., (which I bought a couple days ago). I was sceptical, thinking I'd have a chore on my hands to get it to work - but it had no problem seeing the XBOX 360 controller almost immediately.So: - I have the Xbox 360 Wireless Gaming Receiver plugged into this little quadrapus and just paired the controller in the usual way... and hey presto, works! Couldn't be happier! Major thumbs up! 👍🏻👍🏻👍🏻Now I just need to find the time to enjoy using it 😅

I used on amazon fire stick. It works as expected, powers the device and other usb peripherals. I've used usb hdd powered through the hub without problem.However, it's a bit flimsy. It resets fire stick sometimes when you move the wires (connect/disconnect device etc.). It might just mine. But still once setup there's no problem.

I connect this to the micro usb port on my Windows Tablet which then charges up, whilst also sending power to, and reading data to and from up to 3 usb devices with Type A connectors, so its a really versatile little unit and good value. I can thoroughly recommend it. It should work with mobile phones if they have OTG capabilities, but take care not to use it with 'Quickcharge' fast charging usb power supplies which will damage it I believe, as they are higher voltage than normal chargers.

Just got this. Now I needed to connect an otg sound card to an old Asus Memo pad 7 and have power/charge through to it also. The sound card worked fine connected with no extra power. So thought I'd connect power and see if it charged also. At this point the tablet battery died as needed charging. Pluged in power supply. The supply (original memo pad supply) would not provide enough power to kick the tablet into charge mode. So thought what a load of c##p. However once charged slightly and tablet turned on with 'this cable, the sound card and power' connected the tablet indicated it was charging. ***THE POWER BEING SUPPLIED IS NOT ENOUGH TO CHARGE MY DEVICE BUT IT DOES PROVIDE JUST ENOUGH TO KEEP IT RUNNING WITHOUT DRAINING ITS BATTERY DOWN***. For me this was enough to make it useful.(In all cases above switch was set to 'charge' setting, Also to kick back into sound card otg only without power - once power has been connected I had to reboot device - switching from charge to otg made no diference ).UPDATE: After a while of use the battery was draining even with a chargung symbol being indicated but appeared slower than normal battery drain.

Worked first time, then didn't for many others. Occasionally flips back into a functional item but most of the time it is just not recognised. Total rubbish. Not worth sending back but writing this to save your money. Don't get caught out.

This is a fantastic little bit of kit, does exactly what I needed it to do. I decided to revive my Windows 10 tablet, a Linx 820, and needed a hub that could charge the tablet while still accepting peripherals, and it does exactly that.Make sure the switch is set to charge, plug in a micro usb cable into the correct socket (it's the only one for micro usb) and it will charge your device. I was able to keep my tablet charged and use a USB drive, and I was even able to use a Targus laptop dock that uses USB3 to send a video signal to two displays, and it worked a treat much to my surprise (yes the tablet is USB2 which is limited to 480Mbps max, but that is enough to send a video signal, and to two monitors at that!). Best purchase I've made for my devices in a long time.I've used it a few times since I purchased it, so can't speak about durability, but it's made of plastic that does feel a little cheap, but should be fine for its intended job.

just tested with a sd card, 1x 128gb samsung usb stick and a external driveconnect sd card reader via usb 3.0 cable formatted as FAT32 - all ok, can transfer from sd card to internal phone memory and also, can transfer from sd card to usb thumb drive.Around 2mins per 1gb.Also, with the two devices connected i also connected a usb powered drive and the power cut off to all devices - not sure if this is particully healthy for the devices.I reconnected, reconnected the sd card and then the usb powered drive and no power issues - the usb powered drive is formatted as mac journaled so you probably need to use a fat 32 - not sure on transferring larger than 4gb files though.

U mnie jednocześnie dysk ssd i ładowarka do tabletu nie działało.

Lo sto usando per collegare il mio Samsung A10 alla mia stampante anycubic kobra 2 neo, ottimo funziona a dovere e fa quello che deve.

perfecto

Acheter pour brancher plusieurs contrôleurs USB sur le raspberry pi zéroEt ça fonctionne impeccable

Mijn Fire Stick startte niet meer op, ik zag enkel nog het Fire TV logo. De garantie was helaas net paar maanden verlopen. Gelukkig door deze OTG hub en een bedraad toetsenbord mijn Fire Stick weer kunnen herstellen. Sluit de OTG en toetsenbord aan op de Fire Stick. Start de Fire Stick en gebruik de volgende toetscombinatie: CTRL + ALT + I + Menu button + Print. De Fire Stick start op in Safe Mode en daar kon ik weer apss verwijderen, de software updaten of een fabriek reset uitvoeren. Ik kan gelukkig mijn Fire Stick weer gebruiken!