Inter Link19300100 Novi Sonoma Rolling Cabinet Oak with Metal Drawers

This is a good looking and well made cabinet. I bought it to use as a small computer desk which I use to sit my 22" monitor on. It took me a little more than 2 hours to assemble, but that's just me taking my time. The instructions are easy to follow and the build went well with no problems. Everything fit perfectly and I don't have any complaints about screws, holes etc. The cabinet is sturdy in construction and looks just the part in my study, I'm glad I bought this cabinet and wouldn't hesitate to recommend it to friends and family.

A decent set of drawers with some minor defects in the build experience.The pedestal drawers are solidly made and go together well with adequate use of screws & dowls and those funky things that latch onto a long screw. The castors are the usual plastic wheels on a metal axle and the front two have brakes - assuming you pay attention to the instructions!First big problem: The drawer bottoms slide nicely into the front and sides but are held on at the back by three (according to the instructions) screws (you are actually given 4 screws per draw) but these screws have no pilot holes and are impossible to get in without drilling pilot holes first. I resorted to heavy duty 14mm staples...Second big problme: The drawers are held on to the end of the extending metal runner arms but two screws (left & right sides) but the pilot hole for the screws was too large and if that was intentional so it only "bites" on the metal arm the various holes on the metal arms are all the wrong size (two are too big, two are too small). Given the size of the pilot holes I can only guess that they supplied the screws a size too small. But when I check the idiot guide, it correctly lists M4 x 9mm (item k2) and that is what the screws are! I guess I can find some M4 nuts to go on the end but at 9mm there isn't much thread to work with - M4 x 10mm would be more useful... Looks like I will have to drill after all!

ordered these drawers to go with a new desk , they arrrived on time and once unpacked there were a number of parts and screws , it will take awhile to assemble and one thing you must get right is to put the drawer runners in the right way - i didnt and it took awhile to figure out what i had done wrong ! once correctly assembled the drawers are good quality and have a reasonable amount of storage , however if you are wanting deep drawers this set will not be suitable

This is a small unit, best suited to being used under or next to a desk (and will not hold much). The drawers have a very shallow depth. Each will hold approximately 1 ream of A4 paper. Not really suitable for my intended purpose, but my daughter loves her new set of desk / junk drawers. As an experienced DIY and furniture put-together-er this is not the most straight forward to assemble, it took me almost two hours on my own.ASSEMBLY HELP (wish I had known before assembling this):1) Draw runners: ARROW ON RUNNER POINTS TO FRONT - this is not stated in the diagrams2) Get some small panel pins to secure drawer bases, don't use the included screws as these split the wood easily.3) The drawer fronts appear to slope slightly when in place - this seems to be part of the design and not down to dodgy DIY alignment.4) Unnecessary allen/hex key included.

These are low cost items but look good alongside the beech desk. The assembly went well and I may have been fortunate but all the holes were in the right places. One small point, the hole for fixing of the drawers to the slides was too far forward and meant that the drawers did not really come out far enough to see what was at the back of them. It was not too difficult to drill holes 1" futher back and everything worked well.

Lots of the fittings and screws were "chewed" as if someone had attempted to put it together and gave up. The instructions are terrible and when I did manage to put it together after buying some new screws the drawers stick. Not worth the money and not worth the effort to return it. Avoid

Nice looking, sturdy cabinet, decent quality too. Overall, good value for money. I like it!However, there's one thing that takes 1 star off. I wasted a lot of time assembling, much more than it took me to assemble a desk. The manual could be more clear on some aspects. I spent additional time trying to figure out things and still getting it wrong. A bit confusing.

Spent ages looking for something that would comfortably/sensibly fit under my desk. Assembly was slightly fiddly but not a major issue. I particularly like the usefulness of the top tray area.One thing I really couldn't live with was the plastic handles and that beech finish. Decided to make it match the rest of my painted cupboard surfaces: it's easy to do that (just takes a bit of time) by putting two base coats of this stuff  Zinsser Bulls Eye 1-2-3 Primer & Sealer 1Ltr  to prime the surface and then finish with two top coats of eggshell. No need to sand the surfaces prior to applying the first base coat, but very LIGHT sanding with fine grade abrasive in between coats will give a smooth finish (although I dispensed with that step). The Zinsser base coat paint is touch dry in 30 mins and recoatable 60 mins, and the water based eggshell I used is recoatable in 4-6hrs, so this is all achievable in one day.The two angled handles on the top/front of the unit can be prised off with a bit of brute force; that will leave you with some double-pointed screws which can be unscrewed by clamping some pliers around them, then fill the holes with filler of choice and sand down prior to painting.Used these draw handles  Traditional Half Moon Shaker Cup Pull Kitchen / Cabinet Handle With Faux Screws 64mm Hole Centres - Antique Brass Finish  which have the fixing points at the required 64mm width. You will find that the bolts on these will be too long to leave the handles flush with the drawer front, but I used some spare nuts/washers as spacers on the inside of the draws to get around the problem.This increased the overall cost of the unit but the end result is absolutely worth it for me as I didn't want to have to hide it out of sight. Very happy with the unit now.

Fue bastante fácil de montar, aunque las instrucciones podrían ser más detalladas. La madera parece ser resistente y los rieles de los cajones se mueven perfectamente. Como única queja, uno de los frenos de las ruedas me vino roto, pero supongo que fue un mal golpe en el transporte.

Ero molto titubante se comprare o no questa cassettiera date le tante recensioni negative ma ha pienamente soddisfatto le aspettative invece. Ho seguito le istruzioni (potrebbero essere sicuramente migliorate) soprattutto inizialmente dividendo le viti per tipologia ma sono riuscita a montarlo senza problemi in poco più di un'ora con l'aiuto di un avvitatore. Non c'è nessun difetto di progettazione e i cassetti di chiudono tutti perfettamente. Il materiale è quello che ti aspetti, non è legno massiccio ma materiale pari a Ikea.Dimensioni perfette e molto molto comodo da sotto scrivania

Content de l acquisition jusqu’à ce que je suis bloqué dans les premières étapes pour fixer les rails livrés 7 sur 8 pour les 4 tiroirs en stand bye le temps de trouvé un rail de tiroir

Bra för sitt pris men lite plastiga handtag och manual för installation saknades

Der Rollcontainer hat mir von den Fotos her super gefallen, auch die Ablagefläche an der Oberseite. Also bestellt, 2 Tage später war er da und dann mit zwei Personen zusammengebaut. Aufbau ist vergleichbar mit dem, was man von Ikea kennt. Hätte auch mit nur einer Person geklappt.Zum Aufbau:* Was mir in der Anleitung gefehlt hat, war dass die Schienen mit dem Pfeil nach vorne zeigen müssen.* Zu beachten ist auch, dass zwei der vier Rollen Feststeller haben, damit der Container bei Bedarf nicht rollt, und die müssen natürlich nach vorne. Total übersehen am Ende.* Die richtigen Schrauben zu entziffern war etwas zeitaufwändiger, aber da muss man bei Ikea auch immer gucken und mit den noch vorhandenen Schrauben vergleichen.* Bei den Schubladen sollte die Unterseite mit der Rückwand der Schubladen mit Schrauben befestigt werden. Das kam mir seltsam vor und ich habe lieber Nägel genommen, die wir noch daheim hatten. Wird bei Ikea auch so gemacht und hat hier auch super funktioniert.Falls die Schubladen nicht gleichmäßig eingebaut sind, würde ich nochmal überprüfen, ob die Schienen richtig eingebaut sind, also von der Rückwand her das erste runde und von der Vorderseite das dritte Loch. Ist auch in der Anleitung zu sehen, aber nicht nochmal extra markiert. Und die Pfeile müssen zur Vorderseite zeigen, damit man die Schrauben in den Schubladen mit den Schienen später festdrehen kann.So, ich glaub wenn man das beachtet, lässt sich der Container schnell zusammenbauen.Fazit:Der Rollcontainer sieht super aus und ist stabil, Schubladen sind gleichmäßig eingebaut und lassen sich gut öffnen und schließen, Rollen und Rollen-Feststeller funktionieren einwandfrei. Ich bin super zufrieden. Der Rollcontainer ist genau so wie ich ihn mir von den Fotos her vorgestellt habe. Ich habe bis auf die Kleinigkeiten beim Aufbau (siehe oben) nichts zu bemängeln.