eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Orange

No issues, fits, prints perfect, no breaks, nothing. Just works perfect with the PLA temperature default settings in 3d printer I have. It was sealed air tight went sent and the color is perfect.

I’ve used a lot of different PLA+ brands, and eSUN continues to be one of the most dependable options out there. The filament feeds smoothly with zero tangles or breaks, and the diameter consistency is spot-on, resulting in precise, clean prints every time. Layer adhesion is excellent, and the surface finish comes out beautifully glossy without needing any extra tuning. This PLA+ also has great toughness compared to standard PLA — parts feel stronger and less brittle, perfect for both functional prototypes and aesthetic prints. It sticks well to the bed without warping, and cleanup after printing is effortless. If you want a filament that performs well across different printers and print speeds, eSUN PLA+ is a solid choice. Great value for the quality and reliability!

eSUN PLA+ has become my go-to filament for most of my prints. I mainly design functional parts for use in tooling and fixtures and have never had any problem with the structural integrity or dimensional accuracy of this PLA+. I have run through dozens of rolls of black, grey, and fire engine red with no issues. I don't follow any strict climate control processes or store the rolls in any particular way. I try to remember to remove the filament from the AMS gearing when I don't plan to be printing for a little while, which I believe is a good practice. I always check the end of the filament for brittle arears before loading into the AMS and snap off the end by hand until I run into the first part of the filament where it just bends back and forth in my fingers. That's typically just an inch or two from the previous end of the filament and I never have any issues following this process. I'm more concerned with accurate prints that have great layer adhesion, so I don't typically print for speed, but I have no reason to believe that this filament could not be pushed to limits that I have not tested. Affordable, reliable, and consistent - I count on eSUN PLA+ to get the job done.

eSUN filaments are always a hit for my projects. They print consistently and beautifully. This is a nice orange/tangerine color. Highly recommend!

Great, durable, and quality inexpensive filament with not much stringing and no warping involved. Brands like eSun also do a good job with be tangle resistance for the most part. Also, I have had no issues with this filament clogging. Overall, eSun is one of my 2 go to brands for filament as it's affordable and is AMAZING quality compared to many others out there.

I’ve already gone through 6 rolls of the stuff and it’s been great. The only reason it’s not five stars is because every once in a while you’ll likely get a spool that isn’t wound very well so you have to sit there and make sure it doesn’t catch on itself and ruin your print

I bought for son’s 3D printer. He loves the colors and how it looks at the end of the print. Said this is the best one to buy. Great thickness after print and holds up on his builds. Great value for a great product that holds up in heat and easy to paint . Prints nicely at high or low print speeds.

I bought two spools. The first one was pretty great out of the package, although not all that evenly wound. Then, around the 80% mark it started popping and hissing, something I’ve never experienced because I’ve never used cheaper filament. The filament was wet, and it was bad. I used the rest of the spool and tossed out the remainder. My print was pocked and bubbly on the outside because of the popping. So I moved on to the next spool. It was ok for a while but got tangled on the first print. Wasted about 6 hours of time and filament on that one as it was only halfway through and now way to fix it. From then on it was just a mixed mess and would only print properly for two hours at most and then either snap, clog, sizzle, or not print correctly. I wanted to like this filament, but this was mostly a waste and a massive headache. This filament has caused more problems than other filaments I’ve bought over the past four years combined, but the last one was the one I didn’t much care for the most. The filament snapped and completely jammed my extruded. If I would’ve trusted this filament and left my house like I intended I would’ve come home to a messed up extruder and possibly a burnt up motor. I was only outside for two minutes and I came inside to check and the extruder was clicking and the motor was HOT. I stopped the machine, I tried to take out the filament to no avail, and then completely disassembled my extruder to find segments of filament inside it and the upper and lower cap bowden tube. Never seen a failure that bad. I don’t recommend this filament if you’re using a printer that prints fast 150mm/s+ because things can go from bad to worse very quickly. I’ve only had issues with moisture from PC, never any kind of PolyA+, and never had breakage issues like this. It was very upsetting and I had high hope from others recommending this brand and type.

جميل اللون نفس الصوره

Filament works well. Good adhesion and few failed prints. Strength seems ok. I've had problems in the past with pla filament that breaks in storage if placed under any strain, e.g. if you thread the end through holes in the spool to stop it unwinding. This pla+ seems to behave better.

Il filamento eSUN PLA+ 1.75mm è un'opzione molto apprezzata per la stampa 3D grazie alle sue qualità migliorate rispetto al PLA tradizionale. Di seguito troverai una panoramica dettagliata delle sue caratteristiche, vantaggi e svantaggi. Caratteristiche Principali - Materiale: PLA+ (una versione migliorata del PLA standard) - Diametro: 1.75mm - Precisione dimensionale: +/- 0.03mm - Peso della bobina: 1kg - Colore: Verde - Compatibilità: Compatibile con la maggior parte delle stampanti 3D FDM Vantaggi del PLA+ rispetto al PLA standard 1. Maggiore resistenza: Il PLA+ è più resistente e meno fragile del PLA normale, rendendolo una scelta migliore per oggetti che devono sopportare sollecitazioni o usura. 2. Facilità di stampa: Come il PLA, il PLA+ è facile da stampare, non richiede un letto riscaldato e ha una buona adesione al piatto di stampa. Tuttavia, offre una migliore finitura superficiale e meno probabilità di deformazioni. 3. Bassa tendenza al restringimento: Le stampe con PLA+ tendono a mantenere la forma originale con precisione, anche quando si stampano modelli complessi. 4. Eco compatibilità: Essendo derivato da risorse naturali (come il mais), il PLA+ è biodegradabile, anche se con un tempo maggiore rispetto al PLA puro. 5. Finitura lucida: Il colore verde del filamento eSUN offre una finitura lucida e vibrante, particolarmente adatta per modelli estetici o decorativi. Precisione dimensionale Il filamento garantisce una precisione dimensionale di +/- 0.03mm, il che significa che le stampe sono generalmente molto precise e uniformi. Questa caratteristica è fondamentale per la creazione di parti funzionali e di componenti che richiedono un alto livello di dettaglio. Compatibilità e prestazioni Il filamento eSUN PLA+ è compatibile con la maggior parte delle stampanti 3D FDM disponibili sul mercato. Funziona bene anche a temperature leggermente più alte rispetto al PLA standard, con una temperatura di estrusione consigliata di 205-225°C. Questa flessibilità lo rende adatto sia per utenti principianti che per chi ha esigenze più avanzate. Svantaggi 1. Leggera variazione nelle impostazioni di stampa**: Alcune stampanti potrebbero richiedere una calibrazione specifica per ottenere i migliori risultati con il PLA+ rispetto al PLA normale, soprattutto per quanto riguarda la temperatura di estrusione. Conclusione Il filamento eSUN PLA+ 1.75mm offre un eccellente equilibrio tra facilità di stampa e proprietà meccaniche migliorate. È particolarmente indicato per chi cerca un materiale più resistente del PLA classico, senza dover passare a filamenti più complessi come l'ABS. Il colore verde è brillante e ideale per stampe estetiche, mentre la precisione dimensionale garantisce risultati accurati. Valutazione complessiva: 4.5/5 Questo filamento è un'ottima scelta sia per i principianti che per i professionisti che desiderano stampe 3D di alta qualità, resistenti e con un'eccellente finitura superficiale.

Das Filament lässt sich gut verarbeiten und läuft sauber durch den Extruder. Die rote Farbe wirkt satt und zeigt auch bei dünnen Wänden eine gleichmäßige Deckung. Die Drucke haften gut auf dem Bett und die Layer verbinden sich zuverlässig. Bei sehr hohen Geschwindigkeiten entstehen leichte Fäden, was sich mit kleiner Anpassung der Retraktion beheben lässt. Die Spule war ordentlich verpackt und machte einen soliden Eindruck. Insgesamt ein gut druckbares PLA Plus mit kleiner Schwäche bei schnellen Bewegungen.

fungerar jättebra