LICHIFIT 1pair TV Speaker Bar BN96-16796/16798/18089/18088/18070 A/B/F/H/G Replacement Part for Samsung TV Television

Read review with install instructions from Vincent P. This new unit is slighly thicker than old one but fits fine since screws are long enough. Before removing old speakers, note location of red stripe at screws becasue you must follow orientation or speaker wont get signal from copper tabs. I put a dab of glue on metal plates and round silver speaker coils.

Amazing!!! Almost exactly the same as the original on the tv. I had my Samsung tv without internal sound for almost 7 years. I used a sound bar and it is ok but is another item to turn on with another remote control and signals were interacting with the cable tv remote turning the volume up or down when changing the channels... The original speakers for the tv with the enclosure were almost $100 a pair and always unavailable. Thank god I never purchase them. I saw a video using this speakers and I did the change without changing the whole enclosure. TV was alive with perfect sound again. Require disasamble and reasamble of the back of the tv, but is a very easy job. Thinking on buying another pair in case they are are discontinued later. Make sure the part number is the one required for your tv model.

Restored the sound quality on our Samsung Smart TV. Just be mindful that the plastic is thicker than the original, making the fit of the clips that must be transferred from the original speakers to the new ones difficult. I had to stretch the clips to get them to fit. Otherwise, a quality product at a reasonable price

These speakers were perfect replacements for the old, non-working speakers in our old Samsung UN55H7150 TV (the Costco version of the 7100). After placing the tv on its front (hint: be careful not to grip the screen too hard and use a soft towel as a cushion) on a table, it only took about 5 minutes to remove the screws from the back of the TV. Then carefully remove the back TV covers (outer "bezel" first then the large flat metal "cover" to expose the speakers. Note: use a small head phillips screwdriver and keep track of the screw sizes - there are about a half-dozen slightly longer screws on the outside, the rest are a bit smaller in length. There is also a screw around the power cord area that needs to be removed too. If the cover doesn't come off easily, look for screws that might have been missed. The two speakers are at the bottom of each side, black plastic (approx. 3" x 6") with a metal cover. Carefully remove the back (metal) cover from each speaker enclosure. Be gentle with any wiring connections. I used a thin screwdriver to pry the covers off. There was a slight bit of gooey adhesive used to stick the covers on. With the covers removed I could see the speakers themselves, with lots of foam surround falling apart. My speakers had two small phillips head screws attaching them to the enclosure. Note the position of any markings (red ink) for reference so you can replace with the new ones to maintain polarity. After removing the screws, I slowly pried the speakers (oval) from the case. Note: on one side of the speakers there were two small (1/2") adhesive dots on the "back" side of the back plastic covers that helped stick the speakers to the black plastic case. Peeling these off allowed the old speakers to be easily removed without much effort. Replacement was just the reverse. The (included) rubber standoffs go into the "holes" on the sides of the black plastic enclosures - replace the old ones if/as needed. Total time - start to finish was about 30min. Results were great - back to the original TV sound again just like new!

This item was described as a fit for my Samsung TV. It is NOT an exact fit. The original speaker has slip on connectors for the 2 corners that pass the data to make the speaker work. These replacement speakers, although the same length and width, are thicker than the originals and the slip on connectors do not fit at all. I installed the new speaker anyway only to find out it will not work at all.

Ordered other speakers, which I had to return. I was careful with model numbers and they claimed those fit, they did not. These did fit. They replaced the old speakers which were rattling and sounding tinny.Replacement was a snap. You tube videos show you how. Be sure to lay everything on a blanket on a large table, so you don't scratch the screen, then remove screws, there are a couple different sizes, the small ones I used blue marking tape to stick them next to their hole. Be sure to line up the red dot on the speakers the way they originally were, either mark with blue tape or take a photo, the left and right are different. Should take 30-45 mins start to finish if you've never done this before. A lot cheaper than a new TV!

This does not fit in UN46D6000SF. The two round portion of the speaker is too big, I have to grind them to fit. Also the speaker is thicker, luckily it still make it in without hitting the metal cover. it you have UN46D6000SF. Try other brand to see if the other brand will fit.

Glad I bought these speakers for my Samsung 55" TV.. Fit perfectly and sounds like it should.. I am happy..