Resin 3D Printer, DLP 3D Printer with High Precision, Ultra-Quiet Fast Printing, 20000+ Hours Service Life, 24W Low Energy, Build Volume 6.5''x3''x5.3'' (Included 250ml 3D Printer Resin)

Wow where do I start. I have had this machine for over a year now and it has been such a breeze to use. In the time I have had it, I have only had to re-calibrate it maybe twice? Mind you, I do print quite often for my Etsy store, so it is getting a lot of use! I have had a couple of clogs, but they're easy to clear and I haven't had to replace a nozzle yet. The printer is super accurate and easy to install, it has definitely paid itself off already in convenience alone. Would definitely recommend this to a beginner if they can afford to purchase it!

The media could not be loaded.  I am a super fan of creativity. I have purchased several of 3d printers at home, I have ender 3v2, ender 3, and ender 3s1. At first, I wanted to do an accessory upgrade on the ender 3v2 to get the performance of the ender 3s1 pro. So I modified the metal extruder, replaced the springs of the bed, added a light on top, and changed the focus settings. I then spent more money and time on the upgrades on the Ender 3v2. After I decided to buy the ender 3s1 pro, I found that I could get better performance with less money. It is also easy to assemble. But the modification of Ender 3 v 2 cost me a plenty of efforts and money. I have to say, among all models, the ender 3 s1 pro is the best.

1. Nothing bad to say about the seller, they have better support than Creality themselves. If I could give Asterhome 5* I would.2. My package showed up with a gash the size of a computer mouse that was in the box and was "covered up" with Amazon Prime tape. However on inspection everything look packaged great from Creality on the inside.3. The machine itself looks quite professional with some great upgrades. The LED light is incredibly bright and functioned perfectly on my machine.4. Setup was a breeze and followed the instruction sent by Asterhome. On first attempt of leveling I got a 203 error. Second attempt and it looked like all worked. Attempted to do my first print with the included test models and the hot end drilled right into the board, hard. Stopped and did some more leveling... Next attempt it just starts spraying out at way too high of a Z level. This sort of continued after multiple days and frustration. I tried a few different things to level the base but the Autobed leveling would mess everything up. Either the ABL is completely messed up or the base is warped horribly. Started from fresh and made sure belts were just enough tight, print bed was not loose, upgraded firmware... Still just 203 errors and or not being about to print.Conclusion: I really wanted to like this printer but not being able to use it has kind of put a bad taste in my mouth. I would love to have exchanged it but that's not possible so returning it and might give the S1 Pro another shot or move on to something else. Looking around I am seeing a lot of others with issues with the auto leveling causing problems so it's a toss up if it was damaged in shipping or if it was just faulty from Creality.

I bought this printer on prime day. So far this printer has been great. I had to replace the hot end due to breaking the temperature probe wires after a print failure. Being as I am new to this not sure Tua is helpful. But I think the print quality out of the box is pretty good. It was easy to put together, maybe 30 min. If you have the money we this is a great printer. Love the self leveler and the PEI bed. So far I love it what can I say. I don’t have much to compare it too but I would definitely buy again. Especially on deal days when it’s $100 off.

I like everything about it and will get a replacement. On line support was never on line. Left my information never contacted. Hoping this is a glitch in this unit only. Will try again. If I have issues on the second unit I will try another company.

This replaces my 7 year old Printrbot that finally died. Assembly was quick and bed leveling was easy. Unbox to first print in under an hour. I've printed 10+ TPU prints so far without any jamming. If you're in the US, don't skip the voltage setting on the PSU. Mine was set to 230VAC and had to set it to 115V.

First off, we are very new to 3D printers. After considering all of the benefits of resin vs filament, we originally bought a resin printer. Unfortunately, we could never get it to work. After a ton of frustration, we went with filament and took a chance on this printer. It took a little time to set it up, but after the initial setup this unit has been absolutely fantastic. Printing models does require some sanding and cleanup, but the trade off with ease of use, speed, and overall quality, we are incredibly satisfied with the results. Absolutely recommend if you're relatively new to this and want to get started quickly.

Big disappointment. After working with an earlier version of the Ender 3 I had high hopes for this version. Had all the upgrades already packaged in it. Printed a few successful tests. Then the auto-levelling feature started failing. So bad that the nozzle (hot, of course) ripped a line in the fancy PEI material. The vendor wasn't very helpful. Put it aside while I concentrated on other projects. Will get back to it to troubleshoot more. But like I said, big disappointment.