AntecPerformance 1 FT, Full Tower, RTX40 Fully Compatible, Temp Display, 4 x Storm T3 PWM Fans, Type-C, Dual TG Side Panels, Removable Top Bracket, High Airflow Mesh Front Panel, E-ATX PC Gaming Case

I've have this product for almost a year now and it's held up great.The case is very roomy with great airflow. It has plenty of room to fit a full size mb, full height cpu cooler, and a full length GPU. There is a separate back compartment for cable management and drive mounting, and a bottom compartment for the PSU. I have had absolutely no issues with thermals utilizing just the case fans it ships with with. It's very easy to build in and maintenance is a breeze. There are mesh filters to minimize dust intrusion and the side panel comes off easily for deep cleaning.The fans the case shipped with work great, are quiet, and have had not issues so far.Case ships with an absolute excess of hardware in a little plastic tool tray which is always great to have when you're building a system as some component companies skimp on screws and such.As someone who has built PCs in SFF and Budget cases for friends and family I cannot stress how nice it is to have a quality and big case to build in.All in all very happy with my purchase, my only caution would be to make sure you understand how big the case is before you buy it. It is not something you would likely want to put on your desk.SYSTEM SPECS:MSI Pro X670-P7900X w/ Dark Rock Pro 4XFX 6950XTCorsair Vengeance 2x16 DDR5Corsair HX850

Bought the Antec Performance 1 case just before the Black Friday deals and had I not been so impatient could’ve saved another $30 but let me tell you, it was worth every penny of the $145 that I spent! Excellent materials used in its construction. It’s a beautiful and well thought out design that performs just as good as it looks.AMD Ryzen 7900xSapphire Nitro+ 7900XTX32GB TeamGroup TFORCE 6400MT CL32ASUS ROG Strix B650E-FCooler Master 360L Illusion AIOThe case was a dream to build in. There is soooo much space. The top panels are completely removable so motherboard and AIO installation was a breeze. High quality rubber grommets line the chassis pass throughs and the openings at the top for PCI-E cables were large and easy to use. The left panel is dedicated to cable management. Triple channel cableways (2 front 1 rear) give a clear guide for wires to be run and multiple hook and loop Velcro tie downs are included. Another big plus is there are captive screws (thumb screws) everywhere you would want them to secure things in place. You almost don’t need a screwdriver at all! Then you have two paint matched covers that hide the majority of your wires for a clean finish. Two tempered glass covers line both sides of the case. It’s nice, but it does make for a heavy rig so make sure you’re placing it on a desk that’s solid and sturdy because it’s enough weight to destabilize anything flimsy. The main chamber is large and cavernous so it’s not often you can’t manage to grab something or hook up those more tedious items like USB, HD audio and front panel cables. I’m positive this case will eat a 4090 for lunch and run two 360 AIO’s simultaneously!The part of the case that I probably over looked the most but I was very impressed with was the included fans. This is where a lot of the value comes into play. Some cases of this caliber don’t include fans and especially if you want RGB, you’re going to pay for that after you buy the case. It comes with 3 140mm fans in the front and 1, 120mm in the rear exhaust section. All of these fans have a 30mm depth and they move A lOT of air!! They aren’t RGB but honestly you could get away with not running any as the case is just that nice. You’ll definitely need to adjust fan curves in the bios if you want a good balance of cooling and low noise otherwise they can get noticeably loud at the higher rpm’s. It’s recommended to setup up a positive static pressure in the case as there are a lot of areas where dust will make its way in and accumulate on your hardware if you don’t.Overall I am very very pleased with the product both functionally and aesthetically and I would recommend it to anyone that wants a high quality case at a fair price. If you take care of your things this case will easily last you 3-4 years down the road, multiple upgrades and full builds. Antec built a winner here and if you buy it you will not be disappointed!

This case has excellent airflow. Mounting my components was very easy. It includes plenty of ssd storage slots for the future. I liked the cable covers it made for a very clean looking build. It included the front fans and a rear fan pre installed and I found it to be enough. It looks better in person and it’s as heavy as it looks. Very high quality steel and glass construction. It has plenty of space to mount radiators if water cooling is best for you. I personally could not get the screen on the case to work it was more trouble than it was worth and I had to make my own harness for the power and reset buttons but it wasn’t a big deal it was fairly easy for a person with intermediate electrical experience.Final notes: excellent airflow and build quality, not a small case, and has significant weight. I wouldn’t put it on top of any mdf or particle board desks in fear of that the weight will likely bow the surface over time if placed incorrectly.

As someone who's built PCs for over two decades, I wanted to leave a positive review for this Antec case. This is an excellent product. The case is spacious and provided plenty of room for everything, including the rather large Noctua cpu cooler. The tempered glass on both sides provides a clean look and if you take the time to organize your cables, the final build looks quite nice. The packaging was clean and the inclusion of a sectioned holder for screws and other parts was appreciated. There are also plenty of cable management features which made organizing the mess of cables a breeze. All in all, building in this case was an enjoyable experience.The only cautions I would offer for this case are: 1) The "grill" portion of the front panel sticks to the case with magnets and seems a little loose. It has not fallen in the weeks I've used the case, but it sticks out just slightly and does not perfectly sit in the front. It's not even noticeable to someone who didn't build the PC, but I do wonder how the magnets will hold up. The PC could run without the cover if it did fall off, but it wouldn't look as nice, and for this price point, I expect a high quality product. 2) The case does not include any RGB fans, so if that's your thing, it's something to be aware of. That said, the Antec fans included do seem to be their higher quality models and run very silently.Good job Antec! You've ensured I will continue to follow your products in the future.