4 Pack Thermal Pads

My first time ever doing this on my GPU and I’ve only had my PC for a month and it did wonders for my temp. My EVGA 3080 Ultra is refurbished and was running at 79-81 degrees on the game Wuchang before I did the repaste and new pads. 80 is usually still fine for those cards since they draw so much power and Wuchang is demanding but I wanted lower temps. After watching a few vids and being careful since this is my first PC ever and I’ve never done something like this. These pads (stuck a few on the back of the board between the backplate) combined with the Artic MX-4. I saw my temps decrease to 70 degrees. I’m thoroughly happy with it. Lastly after I saw that drop I just upgrade my case yesterday to the Lian Li O11 Dynamic Evo XL and saw another drop to 60 degrees while gaming and as low as 28-29 at idle and while browsing the internet and running YouTube. Would definitely recommend to anyone for these pads

Love this company. I use this on all of my machines and my computers have been running fantastic. Most machines idle at 30 to 40 vs 45 to 55 (Laptops and desktops) Highly recommend them for everything

I really like this stuff! Nice material. No fabric in it. Malleable, soft. Not super sticky though so make sure you stick it and get it squeezed quickly. Or maybe some thermal glue? Glad I have it. Worth it to get more!

This is for the gray 13W/m.K variant. Used on a "naked" Samsung 9100 Pro because I had to remove the factory heatsink for my specific motherboard. I cut them to size and placed on each chip. Keeps the temps in the mid 70's C under sustained load. These are not the traditional silicone type of pads, but more deformable, a bit like paste. You may need to reapply if removing the heatsink. IMPORTANT: I almost returned them, because I thought I received the blue 6W/m.K kind. Turns out they use blue protective film. The color of the actual thermal pads is gray.

Bought these for a couple of NVMe SSD heat sink applications, and a RX 6750 XT re-pasting/re-thermal pad application. They work very well, and have fantastic temps. You get four thicknesses, medium softness, and enough for multiple jobs. Hard to says how well these match up against Gelid thermal pads or Arctic thermal pads. AT WORST, there might be one degree difference between them, but for the amount you get and how well they perform, these are perfect for me. In all honesty, given how the supply system works, there is a extremely high probability that these are from the exact same factory as the more expensive brands, but just minus the higher end retail packaging.

Used this set as part of my Re-paste/Re-padding of my old MSI 2080Ti Gaming X Trio. The old pads were VERY dry and i'm sure not performing well. These pads were high quality and easy to work with. Highly recommend. When repadding, I just rounded up for the thermal pad thickness. So if the original was a .75mm, I used 1mm. MSI lists thermal pad sizes on their forum.

These pads work. I can't give Technical report or specs but I used this pad material in my Dell M15-r4 Alienawre laptop to completely replace all the old material and fans. The laptop works fine with lots of heat coming from fans. The material is easy enough to handle just use gently and be patient. Lots of small spots in the M15 Multiple thickness was perfect. Did not use 2mm.

Amazing quality, and you cant beat the price. performs well. I would recommend for anyone.

Producto de muy alta calidad. Lo he usado en una GTX1080 y realmente he conseguido bajar las temperaturas que actualmente registraba en la VGA. Lo recomiendo encarecidamente. Por contra es si precio pero lo bueno suele costar caro pero a favor conseguimos mejores prestaciones en nuestros componentes electrónicos.

Great product. Bought the version with 4 different thickness and applied to old gtx 1660 super. Card was bad enough to be crashing a system in under one minute into gaming, worked like a charm, even managed to fix a design flaw with 2 vram being half outside the heatsink area, stacked up 2 different thickness pads. It's very easy to apply and easy to cut to the right size it's also very flexible so even if u apply 02-0.3 above what used to be there it still works flawlessly. Used up around 1/3 of the size, it's more than enough to use on 2 different GPUs, doing 7900xtx next I'm confident there is enough left. Temps went down by 15 degrees on vram even with lower fan speed so it helped with lowering noise levels of card. Size 5/5 Design 5/5 Fit 5/5 Performance 5/5 Value for the money 4.5/5 Totally recommend

Best

Très bonne qualité extrêmement pratique facile à appliquer Conduction thermique au top Plusieurs épaisseurs donc s'adaptent facilement à plusieurs types d'utilisation

Dopo aver sistemato il die con la pasta, ho voluto fare le cose fatte bene e ho cambiato anche i pad termici sulle VRAM con questi di Aairhut da 13 W/mK. Ragazzi, la differenza è netta: prima le memorie scottavano e arrivavo a una media di 86°C, mentre ora dopo il cambio sono sceso a 71.8°C medi. Parliamo di quasi 15 gradi in meno, il che è tantissimo per la stabilità della scheda, specialmente sotto sforzo o durante sessioni di gioco lunghe. Sono facili da tagliare e applicare, hanno un'ottima aderenza e si vede che la conducibilità termica dichiarata è reale. Se avete una scheda che scalda lato memorie, questi pad sono la soluzione definitiva