WEN Cordless 6.5-Inch Track Saw, Brushless with Variable Speed (Tool Only, 20V Max Battery Not Included) (20691BT)

I purchased this saw for the price, it had some decent reviews and quick delivery. Compared to other track saw's the price was reasonable. The purpose for the purchase was to trim the height of several interior wood doors which were now too long after new flooring had been installed. This was my first time using a track saw, however the Wen track saw made the task very easy. I had also purchased the Wen track which works with the saw. After taking measurements to determine the size of the cut, the instructions for the saw were pretty much straight forward. Adjusting and setting the blade depth, track locking mechanism, and making the initial cut of the rubber strip to fine tune the rubber line on the track was a snap. With my lines drawn on the doors, I started the task. I aligned the track with my lines on the doors. Each cut was quick and very easy. The track remained in place, as a smooth precision cut was made every time. No need for sanding or anything else. I was surprised of the results, having no issues what so ever. I did use a clamp on the opposite end of the track to make sure it stayed in place but as I neared that section I removed the clamp and the track did not move. The saw was locked in on the track, it never dislodged and I didn't have any kickback. For the results and price, I am glad I purchased the Wen track saw kit. For my task, it worked flawlessly. Unfortunately at the time, I did not have my shop vac to attach to the saw. But I am sure if I did, it would have collected all of the saw dust without issue. I can highly recommend this saw for cutting interior wood doors without issues.

I got this track saw due to being on a limited budget and for the price i did not expect much. I’m extremely happy with this track saw though! It was very simple to setup and was cutting in a few minutes. The track itself has a rubber section that is pretty grippy but i purchased some clamps that work with the track to be on the safe side. I bought a Diablo blade because i figured for this price, the factory Wen blade wouldn’t be very good but I’m surprised at how clean of a cut I’m getting and haven’t bothered to change it out. Overall, this is a fantastic tool and i still surprised at how well this makes accurate, straight cuts that are super clean. If you are skeptical due to the low price, don’t be. It’s a great tool

Wanted a track saw but hard for hobbiest to justify $500 or more price tags for the other brands. The plastic knobs for adjusting depth etc seem cheap, but to be expected at the price point. First time to-use and wow, cut 3/4 baltic birch no prob, nice & straight, no burning. I saw another reviewer say need to get saw up to speed first before cutting & i agree. . Also got the 110” tracks. If i was a tradesman i would get a better one but im not and seems to work great for its role breaking down sheet goods to manageable pieces for me. Inguess a cheaper saw puts the track saw concept in reach of more people

I needed something to help make an angled cut on some long boards and, since I'd been wanting a track saw, I figured this one wouldn't break the bank. Finally got to try it out today and am impressed. I can't compare it to any other track saw because this is the first one I've used, but it had plenty of power, slid on the track easily, and delivered nice, clean cuts with the stock blade. The saw I got differs from the pics. The two track adjustment knobs are now low-profile. The track lock is a slide, and there is no anti-kickback knob. I really like the soft start feature., but the blade/plunge lock button is pretty stiff. Thankfully once you get the saw running and plunged, you can let go of it. I don't know how the durability will be, but you my occasional hobbyist needs, it works great, and the price is hard to beat!

in 45+ years of cabinet building, i've never thought i needed a track saw so i never looked into getting one. now that i'm 'old and retired' i like to look at tools and buy things i don't really need which is exactly why i ordered this when i found it in a package deal on Amazon day at an excellent price along with a discount coupon. i've been milling down some cherry hardwood i have that's just over 2.25" thick, the saw is advertised at 2 1/3" depth of cut and i thought that would be perfect for straight line ripping the boards, but that's the depth of cut WITHOUT the track, with the track it's just shy of 2.25" DOC. the package came with a 100" track and i wish i had substituted for the longer track to be honest. the track does NOT assemble perfectly straight just pushing it together and tightening up the track clamp/guides, i used a 6' level along the back side of the track to get it perfectly straight then tightened up the set screws. with the track perfectly straight the saw will glide over the joint effortlessly and you'll never even feel it, if you don't, you'll feel the transition from one track to the next as the saw passes over it. with the track straight i made a few rips on a piece i planed down to 2.25" which is the maximum thickness this saw will cut while on the track, placed the track on the wood and secured with the clamps (the clamps really aren't necessary as the track has an anti slip bottom rubber but they are extra security just in case) and made a full depth rip. the saw cut well without any bogging of the motor and no burning of the cut. to the eye the finished cut looked great. i then took the cut over to the jointer and made a single pass at 1/64" DOC and got a clean cut on the very first pass so the cut coming off the saw is glue joint ready for most applications. over the last few months i find i use the track saw more and more and it's become a very handy tool in the shop and i honestly wish i had gotten one years ago. i keep the track assembled and store it in my wood rack so it lays flat and is always ready to pick up and use and now i don't have to worry about assuring it's straight from assembling/disassembling it every time so it's a lot quicker to have in the 'ready to cut' configuration. a full track saw setup for less than 200 bucks that delivers on speed and cut quality, if you're on the fence about buying this, go ahead and pull the trigger, it's a good investment.

Na que ver con makita y otras marcas

La sierra cumple muy bien para lo que está diseñada y el precio es razonable, tenía años queriendo una sierra de riel pero estaban fuera de mi presupesto. El único detalle importante es ver que no todos los modelos de rieles de esta marca están hechos para este modelo. Compré los 55" y tuve que adaptarlos

I've never used a track saw before and didn't really see the need for one however with the increase in demand in things I build for customers with live edge slabs and that absolutely everyone no matter how little woodworking they do claiming these are must have tool I got one. Let me tell you this if you are cutting long wide slabs this is a necessity almost an then once you do have it you'll find it makes squaring ends super fast and if you don't like using the table saw to break down sheet goods it is good for that as well. When it comes to purchasing tools I DON'T buy Festool as it's overrated and not any better built than several other brands but I do usually buy most of my tools from a fairly big name when it came to this tool however it isn't produced by many companies and as I mentioned I didn't even think I would need or use this much so I just grabbed a cheap one than seemed to have decent reviews. I figured if it wasn't perfectly accurate oh well I just wanted it to break down rough stock but I will say this say is perfectly accurate a breaze to use and every bit as good as any other out there. It does how a few quirks like the anti kick lock.....yeah just take that off right away it's a nuisance. I've used this on 1/4" to 3/4" ply and MDF as well as 1" to 3" cherry and maple as well as black locust, osage orange, holly, and patagonian rosewood not to mention it eats walnut as a main staple like a champ. You'll want to throw on a good blade (I used an industrial thin kerf coated rip blade from Freud) but so far I've never had it bog down on anything. This does have slightly less cut depth of a regular circular saw but it leaves very little on a 3" rough slab and it can be easily hand cut or re cut with your circ saw. Most of my slabs are 2" but I do have a supply of 3" cherry and have cut 3" walnut and red oak for countertops and there was no bogging down or burning which cherry loves to do. Lastly I will say you should definitely forget the Wen tracking. I went with Makita as it's the happy medium and the easiest to find in many different lengths but also Festool tracking is exactly the same as well. This way if you do upgrade your sw later your tracking will still work with your new saw. I conclusion if you're like me and wasn't really sure thi was as useful as everyone else claims it to be or you're just starting out and aren't sure where to best spend your money then this is the saw. It is cheap enough to not break the bank but also a very good saw that you might find you won't bother upgrading later.

Siento que le falta potencia, para melamina o triplay está perfecta, pero para madera sólida en su máxima capacidad de corte le cuesta, hay que hacer al menos dos pasadas, pero por el precio está bien, no se siente mal ensamblada, los materiales se ven de calidad, en fin es buena opción económica, aunque si tuviera que volver a comprarla me iría por la Makita a cable, no es tanta la diferencia en precio y es mejor herramienta, el otro punto negativo es que las baterías no duran mucho, tal vez porque la he estado utilizando a su máxima capacidad pero siento que se descargan muy rápido, de todas formas se cargan razonablemente rápido y en caso que sea un factor a futuro son económicas y podría comprar otro par sin tanto problema, y a veces se baja el tope de profundidad, hay que tener cuidado de no hacer mucha fuerza a la hora del corte, en general si la recomiendo si no la van a estar utilizando todo el día, en ese caso mejor una a cable.

Muy buena herramienta... No tengo comparación con otras del mismo tipo, pero me fue de gran ayuda si cortar parota de 4", con ayuda de las guías los cortes quedaron perfectos y precisos... La recomiendo ah 100