DPP Titanium Mount/Adapter Plate Compatible with Smith & Wesson MP 2.0 Optics Ready/CORE Holosun 407C/507C/508T Trijicon RMR/SRO

I purchased this optic plate to mount my Holosun 407C X2 on to my Smith & Wesson M&P 9 Metal Optics Ready 4.25 inch. I know there is a lot of discussion about the polymer adapter plates provided by SW. I ran this gun with the polymer shims and had no issues with the plates at all. My optic mounts directly to the slide and the polymer plates act more as a shim than an adapter plate.While I had no issues with the SW plates, I was not a big fan of the look. The plastic corners stick out quite a bit as compared to the aluminum options. I originally looked at C&H plates but $50 felt steep at the time. Especially after some of the add on options they provide at check out (extra screws, paint markers, T10 torx bits, etc)..you get closer to $80-$100 at check out.I decided to do a little research and found out about the DPP plates. For the price, I figured I would give them a chance and opted for the aluminum version. The plate came with a plastic case which included screws which were marked for either Holosun or Trijicon, a wrench tool, and a Trijicon sealing plate. I was very happy with the packaging and the quality of the materials. I mounted my red dot and had no issues with the fit or the installation.About a month later, I purchased the C&H plate mainly out of curiosity. I wanted to see if there was a noticeable difference between the two.This is what I found....Both the DPP and C&H are made from quality aluminum.The DPP screws felt a little thick when screwing them in. It could have been too much loctite or could have been my pistol. But I did not have any issues with the thickness or length of the C&H screws.The DPP has more of a matte finish while the C&H has more of a shine to it. Holding the two side by side, the DPP has a better fit and finish. It just seems like a higher quality plate.The tolerances on the DPP are much tighter. When installing the Holosun onto the DPP by itself (not on the gun) there is little to no movement. When I install the Holosun onto the C&H by itself (not on the gun) there is much more noticeable front to back and side to side play.When I install the DPP onto the gun (no Holosun), there is almost no play or movement. When I install the C&H onto the gun by itself there is noticeable movement in all directions.The same goes for mounting the Holosun with each plate, there is little to no movement when mounting the DPP (no screws) and there is noticeable back and forward movement (no screws) with the C&H.It seems the two holes on the C&H are a tad too big causing all the movement. I also noticed the two "nubs" on the DPP are a tad longer and thicker which takes out some of the unnecessary movement.Something else I noticed was the DPP plate has a small indent or cutout for what appears to be a roll pin on the SW gun. The C&H does not have that cutout. Not sure how or if it will affect performance but just something I noticed.Obviously once you screw in each combination it appears to feel secure. I am new to pistol optics but from what I can tell is the DPP is the better of the two at this time. I am currently running the DPP with C&H screws.This review might be over kill for an adapter plate but I am very impressed with this option and I would recommend you try it out for yourself.-Gio

Bought for my 5'' M&P CORE PERFORMANCE CENTER. Fit's perfectly. Great fit and finish and looks about a million times better than the OEM shim which leaves a major gap at the front of the optic.Highly recommend this plate. I almost was suckered into buying a competitor at twice the price - super glad I didn't. I also can't recommend the titanium - aluminum is more than adequate.This is the M&P optic plate you are looking for.

Plate is great quality and a perfect fit for both the slide and optic using a S&W PERFORMANCE CENTER M&P9 M2.0 COMPETITOR with a Holosun 507COMP. No wiggle, no gaps, perfect.However the screws included with the plate marked as "for Holosun" are in fact too long, as stated in other reviews. Use the screws that come with your optic.(Otherwise 5 stars)

Machined to a functional spec, lugs and fastener through holes are present.Impressive packaging as it comes with Holosun and Trijicon screws, Trijicon film (for placement in-between battery and adapter plate), Torx wrench, instruction manual, and hard plastic box to contain all of the above.I have a similarly US made adapter that was machined less stellar than this. So I'd say if you're practical with your assembly and spending, this is a very decent purchase.

Super tight and works great M&P M2.0RMR install. The screws provided worked great for me

This straight up is cut way too long for my Smith & Wesson MP Performance Center with the CORE slide. It won't even begin to sit down in the hole because its cut too long. Waited for this to come in just to find out the thing won't even work. Nice waste of time. This is my second product from you guys and it is pretty disappointing to have a product I can't even use.

It fit

My trijicon rmr didnt fit the front posts. My sight fit a platic adapter plate fine. But the dpp plate was out of spec. I had to take a drill to the post holes on my trijicon and ream them out to get this to fit. Works fine now but i would have preferred something that didnt require modification of my optic.