EVO-STIK Flooring Adhesive 2.5L - High Strength - Water Based - Rubber/Resin Glue for PVC - Cork - Linoleum - Carpet & More - Solvent-Free - Indoor Use - Fast Setting - Ready to Use

Seemed to work well Installing altro flooring in my van. This size tub was needed for a lwb transit, and provided ample adhesive, I wouldn't try and stretch the smaller tub for a lwb. Hope that helps another van converter as I had no idea what to use 😅It came with a mini spreader but I didn't realise and had ordered a bigger one at the same time.

THE TILES ARE STUCK DOWN

Pleased with the results.. I used on vinyl floor tiles and the end result is good. It did take over 24 hours to dry and was quite messy. This did mean when flooring was laid the tiles could be easily moved and manipulated into place. However. I couldn’t not use the bathroom so had to walk on flooring before set and the tiles continued to move during this time and had to be realigned constantly. Would definitely recommend using on a floor that could be left uninterrupted while setting. Every time I walked on floor residue would squeeze out between tiles and this was sticky and looked messy. A few days on they are set firmly in place and all residue cleaned away, but the process was a bit messy and laborious.

Great product, really easy to lay the laminate on, i found it easier to apply to the back of the boards rather than the floor. Just need a decent spreader to go with it. has been down for a while now and flooring seems to be well secure still. Was one of the cheaper options but definitely did the job

This adhesive worked grated for laying out flooring in the kitchen. It's was easy to use and really sticks the floor down well. It was quick at drying and amazing value for money.

I found the product easy to use and effective; however it arrived without a spreader and the package had leaked in transit. The leaking package has been mentioned by other reviewers so it surprising that the supplier has done nothing about this as it seems to be a familiar problem.It was my first time laying a vinyl plank flooring and it was not that difficult; any reasonably handy DIYer should be able to do a good job. My learnings were: Look on You Tube for videos on how to do it before you start and have access to a range of tools: Stanley knife, power sander, jig saw and plane, Black & Decker Work Mate (or similar),large piece of wood for a cutting block, paint brush, filler (for around the edges), wet cloth and bowl of water, rubber gloves, set square, pen or pencil.Several other reviewers suggested using a paint brush rather than the spreader provided. I found application with the paint brush easy and applied a reasonable but not excessive amount of adhesive to avoid it coming through the cracks and taking ages to dry..Very pleased with the end result.

It is the right adhesive for my wetroom floor covering

I used this for gluing my custom tufted rugs so not the main use case.Worked excellently for this purpose and the rug is able to bend and flex whilst still being firm enough to hold its shape.Easy to apply and dries very strong leaving me unable to pull individual strands out.Like most products of this nature it is very difficult to remove so make sure to wear gloves and protect any flooring etc.Took a large amount of scrubbing to get it off my wrist.