Jirvyuk Led Aluminum Profile, 6 Pack 1m/3.3ft U-Shape Led Channel and Diffuser with Transparent Cover, End Caps and Metal Mounting Clips, Led Strip Profile for Indoor Led Strip Lights(Transparent)

Very impressed with the quality of this product. Easy to install and performs the job well. No hesitation in recommending

The quality of the product was really substantial considering it's size and the covers either slide on or push on; once together they look really smart; I was really pleased. I used 60 leds to the metre inside and the diffuser has been excellent at lighting up a large piece of glass art, whatever colour the lights are set on. The channel easily took the 12mm strip. The ss clips work well although for some I have drilled through the base of the channel and used a screw and put the strip on top. The end caps fit well, with a small hole for a wire (although of course led strips have a four pin connector on and so you have to cut a slot if you want to use the end cap as the connector won't go thru the hole).

I bought this to fit onto the back of my office desk and also to go under the kitchen cabinets. The quality of these is very good, easy to cut to length - I used strong double sided tape to fix but you get fixing in the box if required.My LED strip fitted nicely inside and the plastic diffuser just slides into place and gives a nice soft glow to the LED strip rather than seeing the harsh spots you normally get.Not a cheap product but if you want a nice looking LED installation then it's totally worth it. The only thing that could make this better would be if you had corner pieces to make jointing easier.

Looks fantastic and easy to install. My workmanship wasn't great with corners but still looks good. You can't go wrong with the price. Includes handy end fittings too.

It was very easy to install and easy to cut . Only issue was weak screws which snapped trying to screw under cabinets. Looks really good if installed properly!

Used for LED lights on our staircase. Easy to cut and install the frosted panels. They just click firmly into place.

Very impressed and I’m an electrician lol

I used this to hold innr smart lights on the underside of my velvet bed. They hadn’t stuck very well and were kicking around on the floor.My lights didn’t stick but they’d already lost their stick and we’re covered in fluff. It didn’t matter there was no need to stick as the cover held them in place.The clips were hard to get in partly because I’m suffering from vertigo and had to be upside down and I was screwing into upholstered velvet. Not a fault of the product but they did it. The clips held well I put in as few as possible because it’s under the bed and not seen and I’m not feeling well but quite adequate.I chucked away the white end caps I couldn’t see how you could use them as the wire wouldn’t go through the hole.They gave plenty of different sized screws, raw plugs and clips.The cover I cut with scissors I might have sawn it if I was putting it somewhere you could see it as it bends the ends slightly. The aluminium pieces were easy to saw, but do need the proper saw.Made a lovely neat job and my bedroom is looking beautiful, Just need to get some flooring and it will shoe off the lights better :-).