Skyreat Anti-Glare Matte Screen Protector For DJI Mini 5 Pro/Mini 4 Pro/Mini 3 / Air 3s Drone Accessories with DJI RC/RC 2 Remote Controller (2 Pack)

I was skeptical of this screen since it was so affordable, but it fits perfect, adhered right to the controller and protects the screen very well! It’s very durable and was super easy to get it aligned to fit perfectly!

Fits the Potensic PRD-1 controller. It is about an 1/8” small for a perfect screen coverage. But I’ll take that! Matte finish is beautiful. Easy install. Comes with 2 covers. (My install was a bit off, my issue, not the product)

Great product

I couldn't see the screen on my mini 3 at all in direct sunlight until I put this on the controller. It removes the glare and still allows all the touch controls to work fine. Installation is easy, BUT, you have to clean and remove ALL the dust from the screen during installation. Wipes for that are included. Fortunately, there's two screens in the box, so you can learn from leaving some dust. Not saying I had to do that.

I’m somewhat biased because I’m coming from the DJI Smart controller which was a very durable, universal device since last update. The Smart Controller worked great with my Mavic 2 Pro and Mavic Air 2S. The DJI RC controller is naturally the better controller due to the latest software but it just feels cheap. The grey color and lightweight just adds to the low quality look and feel. The weight reduction vs the heft of the Smart Controller, is actually a plus when your out and carrying additional batteries. Whenever I pick up the RC Controller, it feels like a toy. I wish DJI made the controller in either black or charcoal. Light grey is a terrible color if your drone gets a lot of use. Overall, you will be happy with this controller as it outperforms the DJI Smart Controller and is compatible with many of the newer series drones. Should you buy: Yes, especially if you need a dedicated device and your phone is not an option.

Perfect fit, it does reduce glare, and it comes with the same tools you can see in cellphone protectors: wipe, stickers for alignment, and sticker to remove dust. I added thicker tape to align and keep it in place as the ones included were not strong enough on the textured plastic of the remote. Once you remove the protector and actually place it on the screen, make pressure on the center first, and it will run to the edges without any bubbles. On the down side, I think it removes a bit of contrast compared to the naked screen.

As you can see in my video the screen protector basically disappeared. So 100% recommend. For people who have trouble getting rid of the corner bubbles, like I have seen in other reviews, I had the same problem initially. However, it’s easy to fix. Here are a few tips on how to avoid or fix them: - make sure the screen is super clean before sticking the protector. See below for details. - do this inside (to avoid dust flowing through the air and landing on your screen) - do it on a bright day/area of the house. Sunlight is better than artificial light to see tiny specs of dust - clean the screen, ideally with a lens cleaner, but the included cleaning kit can also work - use a dust blower (like Giotto’s rocket) to blow off any specs of dust or use the included dust stickers - MOST IMPORTANTLY to avoid the corner bubbles: line up the screen protector with the screen PERFECTLY with all edges. This protector is cut right at the limit. Any tiny sub-millimeter misalignment is going to put the protector on top of the edge of the controller (as opposed to the actual screen) and cause it not to sit flush with the screen hence creating corner bubbles. IF YOU DO GET a misaligned screen protector with a bubble the first time you try to put it on, just gently and slowly grab the screen protector from its edges and slowly lift it up to unstick it from the screen and try again. Always hold the protector from its edges. Don’t touch the sticky part. I actually had to try 3 times with the same protector until I got the alignment perfectly as you can see in the pic/video. No need to throw away the first screen protector and this way you can keep the second one that’s included in the package in case the first one breaks.

My problem with this product is how I will start. First off the first screen didn’t go on well at all the second screen went on well but the corner in the bottom left-hand side about a half an inch of it won’t stay stuck so obviously either my controller head doesn’t have a flat screen or this piece of glass is not perfect flat either way that light bubble down there only shows when the screen is off when it’s on I don’t notice it. The problem with all these types of things is getting them on their thought the dust it just seems to be impossible.

Was excited to get but disappointed as it doesn’t stick to screen totally. Corners won’t stick for some Reason?!!

Je n'ai pas voulu tester l'ecran mat au vu des commentaires mais je suis satisfait du normal. Il ne se voit même plus ! Il est très bien bord a bord et a la même texture que l'ecran !

wow these fit the screen totally seamlessly, edge to edge fit, Zero air bubbles, If you guys know how clear the RC2 controller is, well there is zero reduction in quality, you will not know it is on, trust me and try for yourself.....you would think its made buy DJi its that good....

Fungerar precis som förväntat

Comparado con otro que he probado, este es perfecto, ni una burbuja, ni coloración rara ni brillos extra. Recomendable!