QuickJack BendPak BL-7000SLX-AC (110V) by Ranger

These really blow away jack and jack stands. Takes about an hour to set up, instructions are good and need several quarts of ATF not shipped with unit. Please note that 7000 lb unit is pretty heavy, if portability is key, then 5000 lb may be a better option. It is still portable, but won't be lifting something that weighs close to 100 lbs too often. Takes half minute or so to go to full height. Very stable even at full height. Automatic safety latching is really nice. Highly recommended for those wanting safer means to lift all four wheels off the ground.

I had 3 minor issues wwith my new quick jack 7000.1. As many have said when they show up to your door the boxes are totally destroyed2. The instructions say to use a 5 millimeter hex wrench to bleed the cylinders when in fact they take 3/16th hex.3. In the instruction say do not inflate the air cylinders above 50lbs. Mine were inflated to 90lbs. When I got them.Outside of those things they work great and I'm happy with my purchase

I have had nothing but issues with the hydraulic/air cylinders leaking or just not holding air, from day one. I don't think I've ever used it in the months I've had it, I don't have time to keep replacing parts.

I know this is overkill but I use these primarily to assist when washing my car. I have a Tesla which is almost 5,000 lbs but this lift handles it without issue. Plan to spend some time on the initial setup but once it is assembled it is a snap to setup and break down.

Ordered the QJ 3000 for our car club. We have small roadsters and the smaller size is perfect. It matches up well with the lifting points on the sides and gets the car high enough with safety so we can swap out exhaust systems, rotate tires, do brake jobs etc with ease. Better still we throw it in the truck when we go on trips or to national events and use it all the time. It makes washing and vacuuming the car much easier. We have sold several of the units to others who have had the chance to use it themselves.Loved it so much I ordered the 7000 to use with our full size truck toy haulers. I was going to use it this weekend. It was delivered on Friday. Imagine my surprise! I think I got a returned unit. It was missing the assembly instructions and the user manual. And the critical adapters that connect the quick disconnect fittings to the pump were missing! The packaging is great. All the fittings and hardware come in a single plastic tray that is supposed to be stapled closed. Mine was NOT stapled closed and was missing the critical adaptors. And they were of course closed on Saturday when I called. Hopefully they will get my email and over night me the missing parts.Had this 7000 arrived in the same pristine condition as the 3000 did I would have given them a 5 star review.

Great jack, instructions could be better.Three minor problems on my unit. The small wheels hit the frame and therefore don't turn. So, the wheels are useless. Also, the welds for the hydraulic cylinder are proud of the bottom of the frame and causes the jacks to wobble with no load. These are both quality control issues that don't affect the performance, but should not make it to the customer. Finally, there is a design flaw with the new pump switch (Hydro-Tek with metal cylindrical fluid tank). The switch connects to the motor in two places - the electrical box and the over-pressure sensor. This dual connection can cause excess strain on the wiring and they should be secured better. This wiring is the most likely thing to fail on this system and I would suggest they redesign it to be more robust. These issues are not acceptable in something at this price point, hence the three stars. (Yes, I am keeping the unit. It works very well for my needs.)As for the instructions. (Based on VER C instructions):First and foremost, the amount of hydraulic fluid is wrong. This 7000# unit requires 2.5 quarts and you should top it off after bleeding the system. Secondly, the instructions for bleeding the air out of the system are wrong. The bleeder valve must be the highest point of the cylinder to get air out of the system, so prop the jacks up to elevate the bleeder valve side before bleeding the system. You see the result of improper bleeding in all the youtube reviews because their jacks are very jerky. If it is jerky with no load, you have air in the system still. Properly bleeding the air will make them very smooth.Minor problems with the instructions.Inflation valves come pre-installedThe motor comes mounted to the motor caddyThe 4 plastic plates and nuts/bolts that are note mentioned in the instructions are feet for the motor caddy.The tool list you need is incomplete/wrong. You need:Adjustable wrench (filler valve on pump)22mm wrench17mm wrench11/16 wrench14mm wrench3/16 hex key or socket (bleeder valves)6mm hex key or socket (shipping plugs)Tire pressure gauge & tire pump

I love mine. Definitely one of the best tool related purchases I've made in a long time. I've already used it on various SUVs, cars, and my pickup, a GMC 2500HD Crew Cab that weighs in at about 6000lbs. It lifted that up like it wasn't even there. For getting the whole vehicle off the ground, you can't beat it. If I just need to pull off a wheel, for whatever reason, Ill break out the trusty jack. For everything else, this gets used.I do see circumstances where this particular model would be too long for a particular car. So far, I haven't found this car. In that instance go with the 5000lbs or 3500lbs model.The lifts points range from 32" to 60" for anyone wondering.

This quick jack is amazing. Takes a good bit of setup work, but not impossible if you have patience and follow the instructions. Keep looking for reasons to use it. Great product. Would definitely purchase again. Note of warning: it is quite heavy and cumbersome. If you don't need the full 7000 lbs capacity, you might be better off with the 5000 lbs model.

reste a tester