ECHOGEAR MaxMotion TV Wall Mount for Large TVs 42" to 90" - Full Motion Has Smooth Swivel, Tilt, & Extension - Universal Design Works with Samsung, Vizio & More - Includes Hardware & Drill Template

I’ve only had this mount installed for a short time, so I can’t speak to long-term use yet, but so far I’m very happy with it. The instructions were clear, everything needed for installation was included, and the template made setup pretty straightforward. The mount itself is heavy, but that’s because it’s built solidly. Once I had the holes drilled, I was able to install it myself, although having a second person would definitely make it easier. Everything felt sturdy right away, with no looseness or wobble in the swivel points. The movement is smooth, and the leveling adjustment helped get the TV perfectly straight after mounting. One of the biggest reasons I bought this mount was because my studs are spaced wider than normal due to a pocket door nearby. A lot of mounts would not work for my setup, and the ones that did were extremely expensive. This one fit perfectly and cost much less than some of the other options I looked at. I also like being able to pull the TV out and angle it when sitting off to the side. It makes a big difference when watching TV or playing games from different spots in the room. My 65” TV is around 53 pounds, and this mount handles it with no problem at all. Overall, this is a well-built, sturdy mount that was easy to install and works exactly as expected. For the price, I think it’s a very good value.

This is my second purchase of the ECHOGEAR MaxMotion TV Wall Mount, and I came back to it because my first one has been working perfectly since 2016. It has never sagged, slipped, or caused any problems at all, so I knew I could trust it again for my new setup. I installed this new mount for my 77 inch LG B5 television, and it performs just as well as my original one. The build quality feels very strong, and the full motion movement is smooth, steady, and easy to adjust. It pulls out, swivels, and tilts with no effort, and it stays exactly where I place it. The installation process was simple and very clear. The instructions made sense, the hardware felt solid, and everything lined up well with the studs. Once the television was on the mount, it sat level and extremely secure. I am very impressed with how reliable this product has been for almost a decade, and I am just as impressed with the new one. I highly recommend the ECHOGEAR MaxMotion mount to anyone who wants strength, smooth movement, and long term dependability.

Thanks to the reviews, I was confident of buying this tv mount for my 86” TCL Roku TV to hold up in my tattoo shop! My shop had drywall and metal studs instead of wood studs. Which was great because I went to home depot and got the metal nailes to drill in to hold the mount. What I like about this TV Mount is that is flexible and allows your tv to be viewed in multiple angles and directions! Allowing you to tilt it down , rotate it, extend outwards, keep on the wall, angel it to the left, right, or keep it centered/fixed. I was very impressed and surprised that this mount was able to hold and support the weight of my tv all while adjusting it! It’s very strong and PERFECT for HEAVY DUTY TV INSTALLATION! All I could say was just WOW when it was finally put up! If your hesitate on buying a tv mount that your not sure will hold your big huge tv up, LOOK NO FURTHER AND BUY THIS! Heavy duty, strong, adjustable, easy to setup, ease to use and GREAT PRICE FOR WHAT ITS WORTH! The size is PERFECT too and well designed. Flat enough to blend semilessly on the wall and have your tv fixed FLAT on the wall without it being “out” too much. I HEAVILY RECOMMEND THIS FOR HEAVY BIG TV USERS WHO NEED TO HAVE THEIR TV MOUNTED AND SUPPORTED ON THE WALL! It was shipped and delivered fast too!

Excellent product for your larger wall mounted flat screen,, while you do need some tools to install, the install is straightforward and simple. Find your studs, drill , lag bolt it to wall and place TV on it after mounting the brackets to TV. The kit comes COMPLETE with all lag bolts for the wall, various bolts to mount the brackets to the TV including an assortment of spacers if needed. The directions are clear and easy to understand. The unit itself is ONE SINGLE PIECE, and it is ALL STEEL, so it does have a bit of weight to it ( about 20 or so pounds). No complaints here !!!! i just mounted a 70" 65 pound lg flatscreen to the wall,, its secure, moves easily in and away from wall and angles left right and you can adjust the forward tilt up and down,, there is also a very simple adjustment if your mounting bracket is a little off level to level the TV itself after placing on mount. Im very confident this product is never coming off the wall EVER until I take it off. Over all one hell of a good deal for a quality item, If you want to see how good they really are, go to the MFG website. I did my research on quite a few mounts and there no need to spend 2-300 or more when this one does the job just as good. I highly recommend this product !!!

Excellent build quality. The instructions were clear and thorough and included all the nuances for a variety of hanging scenarios. The instructions also included humor that was an unexpected touch of humanity for a tv-mount manufacturer of all things. A wide range of adjustments, included template, and flexible set up made this experience 5 stars and very worth the money.

This is a very good TV mount. I used it for a 65in LG OLED C1 TV which weights around 75lbs. I had already owned a different full motion mount for my prior TV but given the required placement of the mount on that TV (much lower), I was going to have to move the old one anyway. The specs on that one suggested that it maxed out on a 60inch TV. I'm sure it would've worked but that other mount was somewhat tough to move when the TV was actually on it so I decided to get a new one. In comes the ECHOGEAR mount... Everything needed for mounting was included. Especially important are the lag bolts for the portion that mounts to the wall. I don't believe I received those with the prior mount so that's an extra cost (and trip) to factor in for other mounts. Also appreciated the template provided. Instructions were clear, well written and entertaining. I really don't know why that is so hard for many companies but they could take a cue from ECHOGEAR on how to write instructions. Overall, installing the mount was not difficult. The hardest part is just making sure you find studs in the wall and are relatively centered on them. And I guess holding the mount while installing the first couple of lag bolts. My installation has the TV located in a cutout over my fireplace -- i.e. a recessed nook. My TV is 57in wide, the cutout is about 59in wide so there isn't a lot of clearance on the sides. After mounting the brackets to the TV, I measured from the bracket hooks on the TV to the top and bottom of the TV to ensure I was placing it at the right height in the cutout. Marked the height in the nook, grabbed the template and marked where my lag bolts would go in. I pre-drilled the holes and then held up the mount while screwing in the lag bolts, making sure it was level along the way. After that, it's just a matter of extending the mount, setting the TV brackets on the front top of the mount and securing the bottom. As another reviewer stated, it's a good idea to tighten down the tilt mechanism prior to putting on the TV, it can always be adjusted later. Overall, this could probably be done in about 20 minutes but I probably took an hour just to measure multiple times and think thru what I was doing. As I said, I only had about an inch clearance on either side so I was worried that my slightly off-center studs were going to make it very difficult. Based on where the holes in the backplate are and where my studs were located, the mount was an inch closer on one side then the other, so I was still worried about being centered. Turns out, that was all for naught -- while it's good to be as centered as possible, there is sufficient lateral movement in the mount to get the TV centered even if the mount isn't. You might be asking, why only 4 stars? Well, I have a couple of small gripes. Some may be fair, some less so: 1. This mount moves easily, even with a 75lb mounted. Much, much better then my last one. I wanted this feature but now that it's mounted, I'm not as convinced I do. I only need the movement when first mounting it to pull the TV out, connect everything and then push the TV back into the cutout. After that, I'd prefer it didn't move again until I replace it. WIth this mount, if you touch the TV, it will move -- no real force needed. Given my minimal clearance on the sides and the fact that my TV is a thin piece of glass, I have minor concerns that I'm going to bounce it into the walls when cleaning. Hard to blame the mount for being too fluid but it's a thing. 2. The paper template is nice for marking your holes. My minor gripe there is that it's hard to hold a piece of paper against a wall, put a level on it and mark the spots for you lag bolts at the same time. Very minor complaint and there may be some trick to this that I'm missing but it would be lovely if some clever person came up with a solution to that -- like a thicker edge on the template. 3. Another minor complaint that may be more on LG then ECHOGEAR -- which screw should I use to mount the brackets to the TV? ECHOGEAR provides several different sizes with different lengths and widths. Ideally, you want to use the longest one that will fit in your TV. The problem is, that if you use one that is too long, you break your TV. If you use one too short, your TV may dismount prematurely. This is probably on the TV manufacturer to provide since I'm sure it varies. But a note in the instructions would be nice on how best to determine this. I struggled with this longer then I should have. For me, I took a medium length M10 bolt, attempted to thread it slowly and gently into the TV to see if it would fit all the way. It did, so I went with that. Could I have used a longer one? Perhaps, but we'll never know. 4. The last gripe is cost. My previous mount was about $50. This one was closer to $120. They are both equally heavy duty and built very similarly. This one has much more fluid motion so it's worth extra $$. But is it worth over double? Probably not. But given how much I spent on the TV, I'm not going to lose sleep over the cost of the mount but I feel like it would be a better value around $80 and that would have warranted a 5th star from me. In summary, I listed gripes but the reality is that there are many more features of this mount that are good and it's definitely something I would purchase again or recommend to a friend. However, I would also have them watch to see if they could get it a little cheaper than list price.

I have only just installed the product. So this review is not based on weeks or months of use. But the instructions were clear. And it does seem to be a very well built TV mount. There was no play in any of the swivel points. Everything leveled out nicely. There were no weird problems in installing it. It installed fairly easily, as easily as one could hope for with regards to this type of mount. Beware, that it is a heavy device. Once I had the holes drilled, lifting by myself and keeping in place was doable, but could be a little difficult for a smaller person. It's heavy, because it's built well. While I didn't need to use it, there is a leveling feature on it which allows you to rotate it slightly clockwise or counterclockwise to make it level. My only complaint is that there is a bit more space between the back of the TV and the wall that I would have liked. 3-4 inches. But that's the nature of a sturdy full swivel TV mount. With all of the hefty hinges and swing arms behind it, it's unavoidable that there will be space there. I do feel that it is securely mounted. Also, it appears that my 53 pound 65" TV was easily and sturdily supported by this mounting system. But that is well under its rated support range of 125 pounds.

Purchased for a 75” patio TV, which has not yet arrived. But I have installed the mount, which is progress. The mount is excellent quality and was easy to mount. The instructions were simple and clear, and the mounting hardware was included. I did install a cedar backer board on the brick and mounted the mount to the backer board. It’s super sturdy. What I like about this mount is the ability to ensure it’s level after installation. Simple twists of a couple of screws is all it takes to ensure it’s perfect on the wall. Nothing is worse that going to all the trouble to mount something precisely and correctly and then being able to detect one side higher than the other once installed. This mount prevents that from happening. Looking forward to getting my TV on the mount! So far, so great. Highly recommended.

Excelente soporte, en realidad la marca se ve que tiene buenos estándares de calidad, la calidad del acero es muy resistente, necesitas buena herramienta para instalarlos, como llave de dados de 10mm, un buen rotomartillo para hacer las perforaciones, ya puesto el soporte se siente muy resistente, yo me recargaba completamente sobre el y peso 72 KG, sin moverse ni rechinar. vale la pena la espera que sea importado de USA.

Great product fast shipping thank you

We bought this to hang our 55" TV. We chose this model to fit the bolt pattern on our TV and after finishing the install, we are confident this is a good product. This appears to be well made and good quality. The mount is packaged very well, we had no concerns anything inside was damaged, and there is a great selection of screws and spacers. The lag bolts were good quality. The instructions are the best : clear, well written, good pictures, and they have some fun too. As the product claims, this is very easy to install. The template is accurate and makes this a quick job (once you find the centre of your studs). If you are unsure at all, watch the installation video - it's only a few minutes long and is a reliable demonstration of all the steps. The mount moves smoothly when pulled away from the wall and pushed back in. Great options for extending out from the wall, tilting down, changing viewing angle - all the product descriptions for range of motion are accurate and easy to adjust.

I poured over many reviews and Q and A's for all kinds of different TV mounts on Amazon, google searching "Best Of" and review sites, checking out many big-box stores, etc etc. and finally decided on ECHOGEAR. I'm glad I did. The price was right, the mount is super sturdy, and the instructions are crystal clear. The company also has a great sense of humour. All big wins! Installation was pretty easy and straightforward. The instructions are excellent. This mount is sturdy! I love the fact that it extends out 22" - just what I was looking for - a good solid mount that retracts very close to the wall, yet extracts way out so I can turn my TV to see it from the other room (while making supper or eating at the table). I've included photos with my new 55" Samsung TV on it. We'll be looking for a nice table to go underneath the TV now and repurpose the old stand. A nice cable cover for the wall and things will look even better. I purchased this so I have the option of putting a much larger (and heavier) TV on it in the future. My TV is in very safe hands - this thing ain't going nowhere!

Muy estable solo hay q comprar los tornillos para concreto por separado