80A RC Electric Speed Controller ESC for Brushless Motors 5.5v 4A UBEC with XT60 & 3.5mm Bullet Plugs

Description

The RC Electric Parts 80A Electric Speed Controller (ESC) is a great little powerful ESC that runs very well and doesn't run hot like other ESCs! The ESC comes pre-soldered with 4.0mm Bullet Plugs and an XT90 Plug, eliminating the need for you to solder your own plugs on! The ESC can be programmed via the transmitter as explained in the instructions or using a programming card that can be purchased separately. Make sure to use an RC Electric Parts Programming card to ensure that it'll properly program the ESC. Benefits: Programmable either using a programming card or transmitter Super smooth and accurate linear throttle adjustment Supports high RPM motors. Utilizes smaller MOSFETs to minimize weight. Minimal heat loss Specs: Continuous Output: 80A Bursts Output: 100A for 15 seconds UBEC: 5.5V/4A Lipo Battery: 2 - 6s (cells) NiCd/NiMH: 5 - 18 cells Voltage Input: 6.4v - 25.5v Size: 66mm x 35mm x 18mm Weight: 90g Motor Type: Brushless Motor Max RPM: 240,000 rpm for a 2 pole, 80,000 rpm for a 6 pole, or 40,000 rpm for a 12 pole brushless motor ESC Manual Link https://www.rcelectricparts.com/esc-user-guide.html Review: works great and very helpful website for relevant ESC documentation - Good controller and they have a great website which helps with all common FAQs. The weight is as expected for this size of esc. Only thing is while connecting the power to xt60 plug the contact spark does caught me off guard so watch for it. It worked great with my propeller and arduino setup. But website mentions bec is 5v but gives slightly more so don’t connect to 5V pin on arduino if you are using one connect to Vin Review: Muy bien - Buen producto