KSP 2in Front Lift Kits for Ram 1500 2009-2024, 2" Leveling Lift Kit for 2009-2024 Dodge Ram 1500 4WD, 2005-2011 Dakota 2WD 4WD, Aluminum Suspension Level Kit CNC Strut Spacers For Pick Up

Straight forward, basic lift kit. Made my 2021 DT Ram absolutely level. Easy to install. Highly recommend some upper control arms as well for ball joint angles. They'll pay for themselves by not tearing the boots constantly.

I bought this kit to install on my truck to raise the front to match the rear section. It works great. My truck is now leveled out and it looks fantastic. Thanks.

Worked great. Not to hard to install

I can’t say which way would be better but…..Your strut has 3 studs on the top that go through the tower on the frame making it simple to locate the strut into the tower.This kit fastens to the strut with nuts and lock washers, and you get 3 Allen head bolts to now connect the spacer to the tower.Now I will say this, it is somewhat difficult to pry the lower control arm down the additional 1 1/2” so it slides up into the tower. A second set of hands would come in handy.The next obstacle you come across is trying to line up the holes in the spacer with the holes that the studs used to go through. Once you have accomplished that task u r pretty much done.Now, I’m not sure if using lock washers on a front end is proper. I was taught the there is too much vibration and lock washers can split and fall off leaving a loose connection. I used lock nuts with locktite on them and didi’t use the enclosed hardware.Guess it’s your preference.Now having only done this once with this setup, I wonder if the different style spacers with studs on top would be easier. Has anyone tried the stud top spacers.Other than the above, it’s just a metal spacer so it’s not rocket science as to what they do and how they go on.Ride height is perfect now and a wheel alignment was done to correct the wheels now pushed out slightly at the bottom.Hope this helps. Best to all!

This leveling kit is a great option. The parts are high quality in my opinion. CNC machined out of a solid block of aluminum. No welds to fail. The hardware was included but one of mine was missing washers. I easily replaced those.I think one improvement would be for them to include the Allen wrench needed to install the bolts,It's larger that the most common Allen wrench sets and I didn't have one large enough.The install took 5 hours to get the struts out and then back in, but the leveling kit installed took less than 5 minutes per strut and was a perfect fit both on the factory strut and when reinstalling the strut into the body.The lift was almost exactly 2.5 inches and perfectly leveled out the truck. No noticeable difference in the ride, no drift in the steering either but an alignment is highly recommended after install. All in all, I'm really happy with the purchase.

Installed the front 2.5" kit on my 2017 Ram 1500 4x4. It's only been about two months but they seem to be holding up well. Install took me about 5 hours for both sides without power tools. Getting the strut back in was a pain but other than that it went well. Leveled out the front end out nicely. The front wheel to fender gap is about 3/8" to 1/2" higher than the rear but it's hardly noticable. The two inch kit would have probably leveled it out exactly the same. I'm happy with the 2.5" kit though. Just make sure you get an alignment ASAP after installing these or your tires will wear unevenly. Great buy for the price!

Not a fan. When mounting to top of shock assembly the very first nut i went to torque down (40lbs instructing) completely stripped. Lucky it didn't effect the shock mounting bolt. NOT HAPPY!

easy to install and truck looks great with the front level!!!