Kitchen Bathroom Sink Pull-down Faucet 1/2" IPS Black Braided Replacement Pull-Out Head Hose 59-inch or 150cm for Oil Rubbed Bronze Taps

I couldn't be happier (so far) with this purchase. Both connections were a perfect fit and the braided nylon(??) outer hose slides through the faucet neck smoothly and with very little friction, making the nozzle a lot easier to pull out. The one issue, which others have noted her on Amazon, is that the weight provided by the faucet mfgrs will slip a bit on this thinner hose. I fixed that with a 1/2" wide x 1 1/2" long piece of double-sided foam tape placed on one half of the weight. Placement of the tape was such that it effectively decreased the inside diameter of the weight which, along with the adhesive on the tape. stopped the weight from sliding down the hose.While I can't say for certain how long this hose will last, for the price and ease of replacement I could be happy having to replace this hose every six months to a year if necessary. Hope that turns out not to be the case, of course. ;o)

The media could not be loaded. I purchase this product this morning not knowing if it’s the right size for a hose replacement that I need for my kitchen sink faucet. The product came around 8pm. I installed it as soon as it arrived and Viola!…. It fits perfectly. I replaced the kitchen faucet hose for about 10 minutes. Now my kitchen faucet works like it’s brand new….Thank you Amazon for fast delivery…

I was searching for a replacement hose for my Vigo VG02001 pull out sink hose. The old hose got brittle and cracked. Found this one and gave it a shot. There is a difference in weight and feel. This does seem cheaper materials used. But this worked. I replaced the hose and connected everything back up. Now no more leaking hose. For a quick cheap replacement I would recommend. Looking around the net I saw similar for 20+. Follow the instructions on the listing and make sure to put the washer in the nut where it attaches to the water outlet. Note I took out the orinigal hose nozzle where the hear screws on from the old one and placed it on the new one. Just slide off and reinstall on the new one(switch them out) so the end can sit properly in the spout end.

The hardware stores in my area apparently do not sell parts to fix pull-down faucets. I was quite displeased when the hose on ours cracked and sprayed water everywhere. I found this on Amazon after some searching and looking at reviews and took a chance. It was cheap and I figured worse case I would be out $15. Surprisingly it worked perfect and was easy to install. My only complaint is if you haven't used the faucet in a while and pour a glass of water it tastes like it came out of a garden hose. The solution, let the water run for a little bit before drinking from it.Overall, I am very pleased with this product as it saved me a lot of money not having to replace a whole faucet. It only took me 5min to remove the old and install this new one with a new faucet head.

The end of the hose that screws onto the faucet is not as advertised. It is a cheap, rounded, hinged chrome piece. For a pull down faucet where that part is visible, this doesn’t work.

I bought this to replace the pull-down hose on my Kraus faucet. Kraus wouldn't honor their warranty, unless I had both the purchase receipt and the serial number from a tag that was on the supply lines (which I must have removed when I installed the faucet a few years ago). So, I found this hose. It fit, and even came with a few extra washers, presumably for slightly different installations. No leaks so far, but time will tell.

The fitting on the end was different than what was shown. Got my sink back working but would have like the fitting shown. Can’t comment as to it’s durability.

Facil de instalar, calidad de material me gusto mucho