HDFury VRROOM 8K 40GBPS

Some advice, use the Claude Ai chrome extension to help you set this up. It worked perfectly for me.

It is so overly complicated to set up. I did my best and got it to make it work somehow. I have 4 devices for HDMI IN and I need the signal to go out to a TV, projector and eARC out to a Sonos Arc. You really need to read the manual and learn the whole thing as HDMI Out is TX0 for example. Bottom line when I try to watch a movie on the projector the image goes black after a minute. Tried different cables, different settings, nothing fixed the problem. The only way to fix it is to disconnect the HDMI out that goes to the TV while watching something on the projector. And now about customer service :-) You can write them an email. They will guide you to discord. You have to learn how to post there and when you do, their 24/7 support is actually for a few hours on their time zone. I asked different questions that were answered 8 hours later and not really solved anything. Meanwhile a basic Orei matrix switch with audio extractor just works and it's 10 times cheaper.

Big Upgrade for any home theater enthusiast. I found it easy to configure and install. The manufacturer's online forum keeps owners appraised of firmware updates and is very helpful if people run into configuration issues. Notable improvement in video on my JVC NZ8 Projector.

I have a Sonos Beam 2 with a sub and 2 surrounds. I can finally listen to movies on my 4K Blu-ray player that are coded with DTS Mater Audio and it sounds amazing. Sonos does a great job with Dolby Audio and PCM Audio but with this piece of equipment everything sound at its best and you now have full DTS. So if you have a Sonos beam 2 with surrounds and a sub you will be able to hear Dolby Atoms, PCM 7.1 channel and DTS 7.1 channel. Full disclosure this doesn’t work properly on the Sonos Arc.Update: It’s now compatible with the Sonos Arc. Sounds Great!

It does what it says it will do, but it being reliable doing those things long term is another story. For the price, this thing should just simply work with minimal hiccups. The issues I had(and many others if you follow the discord server) was that volume control was working through eARC initially, but then stopped working, and wouldn’t work again no matter what I tried(and never worked again). Sometimes there would be no sound randomly or no video coming up which required a hard reset of the device for it to function normally again. Or unplugging the power for devices to fix handshake issues. These were daily occurrences.There’s been too many times I sat down to watch a movie, which then turned into 10-15 minutes of resetting devices and messing with settings to get it working normally again.. when all I wanted to do was watch a movie. It felt like a big mistake buying the device every moment i’d be sitting there messing with it to get it working. Maybe far down the road they will release some firmware where everything works perfectly, but as it currently stands this thing is not worth near it’s price tag. I really hoped it would work for me, but I was forced to return it.If you decide to take the dive, I hope it works better for you.

I got it to extract/display dolby atmos from Panasonic ub9000 instead of just dolby surround. It did not do that, and that had to come from the ub9000 itself. However, the Vrroom made surround sound experience from both 4k Apple TV and ub9000 a lot better. I don’t understand how, but it did. It took sometime to set it up, and customer support was great!

This is not easy to get working, video output is limited to lower refresh rates, and this doesn't work with Sonos that well. Customer service is difficult to reach (discord channel only) and they are also rude. Suggest saving your money and going a different route.

Vrroom does the job. One can indeed get 4k 120 with Atmos support out where not otherwise possible. It can do other things too.The problem is it’s finicky. I have the above use case which is the most basic use case for this device. With a HTP-1 and LG C9 I was finally able to accomplish the goal and have a PC, Xbox, and PS5 all connected with VRR. But, there is lots of hand shake issues and I’ll often have to swap back and forth between sources to get the signal back. Age old problems.The support is a discord server with very little actual support. At this price and early days, the Vrroom isn’t ready for prime time.

他社製品の出来なかった 4K120hzとオーディオ（eARC）にスムーズな分配ができました。モニターのチラつきも ノイズもなく 耐久性が分からないですが 今の所満足です。

This thing is amazing, I was so upset after switching to a Sonos Arc from my receiver because my 2019 TV doesn’t support eARC and doesn’t have HDMI 2.1!I couldn’t get real surround sound on my system, but now it splits the audio channel and sends that directly to Sonos and sends a perfectly untouched video signal to my TV.It’s expensive, but if you want to avoid upgrading your TV this is a great solution, and it’s relatively futureproof as well.

Antes de nada, advertir a los posibles comprdores que se descarguen las instrucciones y lean bien los modos de funcionalmiento ya que no es posible ciertas funciones todas a la vez.Hay que decir que este es casi el unico aparato capaz de manejar 4 entradas HDMI 8k 60hz y salir a 2 HDMI en 8K a 60hz, salida hadmi de "Audio Only" y salida HAMI eARC con gestion de Edid, escalador y desescalador, soporte FLR y VRR, Dolby, extractor de audio, etc... al menos el unico por debajo de 1000€ (en fecha finales 2022).PERO!!!! esto no es exactamente correcto. Como aparato es muy buena maquina, y da muchisimas opciones, pero no es capaz de hacer todo lo que esperariamos de un Matrix 8K.Hay que entender que tiene 5 modos y solo podemos usar un modo a la vez, aunque se puede cambiar rapidamente de modo via wifi por la App o a traves del navegador web y accediendo a la configuracion interna.Tiene 5 modos, 2 splitter y 3 matrix:Modo 0 - Splitter: Todas las entradas a las salidas, saldra lo mismo por ambas salidas y misma resolucion (sin escalador o desecalador) Soporta FRL5 y VRR para ambas.Modo 1 - Splitter: Todas las entradas a las salidas, saldra lo mismo en ambas salidas y con escalador a 8k en la segunda salida. Sin soporte VRR.Modo 2 - Matrix: Todas las entradas a todas las salidas independientes hasta 18Gbps, Sin escalado ni desescalado y sin soporte FRL.Modo 3 - Matrix: Todas las entradas a todas las salidas independientes hasta 18Gbps, Salida 2 con desescalado y sin soporte FRL.Modo 4 - Matrix: Todas las entradas a todas las salidas independientes, Salida 1 soporta FRL5, entadas 2/3/4 18Gbps maximo.Como se puede ver, no es un Matricial en toda regla, es una mezcla en la que hay que estudiar y entender los modos para poder encontrar la forma de gestionar el sistema y conseguir que todo funcione correctamente. Algo que ya auguro, sera complicado.Hay que decir, que al marguen de la pantalla oled que lleva en la parte superior, que es muy bonita, pero que realmente su funcion es muy limitada ya que solo muestra informacion de entradas y salidas y modos edid por E/S, yo veo que es algo que suma dinero y que con un sistema por leds tambien serviria y reduciria el coste.El aparato es bonito y bien construido, carcasa metalica bien acabada, muy buenos materiales, muy brillante. PERO !!! señores, esto estara mas bien escondido, no es necesario que parezca un Ferrari, se tendria que haber sacrificado tan buen acabado e incluir un pequeño mando para poder cambiar rapido de entradas y salidas.La configuracion es imposible a traves de la App Android/IOS, la App es mas bien para usarlo de mando, PERO !!! hay que coger el movil o tablet cada vez que queremos cambiar la entrada? eso o ir hasta el aparato y usar los botones mirando la pantallita de encima, que si lo tenemos en un mueble escondido mal vamos.La configuracion a traves de la web es completa AUNQUE!!! se echa en falta muchas cosas. Tiene los apartados de EDID que se puede configurar de forma brillante y de cualquier manera el edid de cada entrada y cada salida incluida la de audio. Por ejemplo, tengo una PS5 a un monitor Gaming 4k120hz VRR y un receptor AV 7.1. Pero tengo el problema de que el monitor le pide señal de audio 2.0 a la PS5 asi que el receptor AV funciona a 2.0. Puedes gestional como quieras el EDID. Le dices que coja el edid de la salida 1 (Monitor 4k120hz VRR audio 2.0) y lo modifique con Full audio 7.1 (o lo que quieras, Dolby, PCM, etc...) asi que las PS5 (o Xbox) recibe edid de 4k120hz VRR full audio 7.1 y lo emite, y el VRRoom distribuye ambas señales a monitor y receptor AV funcionando todo perfecto.Las gestiones de HDR, Dolby Vision y eARC son igual de brillantes y te da la posibilidad de controlarlo y modificarlo todo.PERO!!!! la gestion de los modos es limitadisima, solo puedes seleccionar los modos y nada mas. Estaria bien poder selecionar que opciones quieres por entrada y por salida en base a la potencia del mismo aparato, pero no es asi. Esta cerrado a los modos y punto.EN RESUMEN: El aparato es una MARAVILLA A MEDIAS o una CHAPUZA A MEDIAS depende de como veas el vaso y de como puedas adaptarlo a tus posibilidades asi de a que estes dispuesto a renunciar. Por ejemplo, si quieres 2 salidas a 8K no tendras Matrix, tendras splitter. Si quieres Downscaler o Upscaler no tendras VRR. Y asi varias cosas que hay que considerar o adaptar otro aparato que haga parte del trabajo.Espero que esta parrafada les sirva para no llevarse un chasco, aunque teambien puede ser una alegria, al fin y al cabo, a mi me sirvio al final, aunque a un alto precio.Saludos.

The device literally just works. Long term issues on my setup got immediately sort it out when this device have been installed.It’s an investment but I can’t recommend it more!

Für Mich die beste Hdmi Schnittstelle !Meine Soundbar spielt endlich Dolby atmos. , und Bild hat sich auch verbessert .