









🔧 Upgrade Your Tablet Game!
This LCD Display Touch Screen Digitizer Assembly Replacement is specifically designed for the Samsung Galaxy Tab A7 Lite (models SM-T220 and SM-T227U). It includes a toolkit for easy installation and is thoroughly tested for quality assurance, ensuring a reliable and seamless user experience.





K**T
Great value and product quality.
I read some of the other reviews before I ordered. Most were good to great experiences with this item. I didn't want to purchase a new tablet. A new one would have been $350+ used. The replacement display was bubble wrapped and came with all the tools needed to replace, including the adhesive stripps to secure the screen.The replacement works great, and display works and looks like the original.WATCH A VIDEO ON HOW TO REPLACE. Be careful....The display is glass.The only problem I had was that the adhesive isn't as strong as I would like it to be. But that could be a good thing, if you didn't connect something right and you need to remove it again. Now that everything works fine, I'm going to use a heat gun or blow dryer to heat the edges up, when the adhesive cools down, it should stick better. Heating the edges can also help removing the screen. **there are 3 round transparent areas around the display glass. 1 for the camera, 1 for a dimming sensor by the camera, and 1 for the display dimming sensor on 1 side. They are only transparent areas. The camera and the sensors are not attached. When the display is removed, you can see the 2 small copper colored square sensors and the black, round camera inside of the outer edge of the tablet. DO NOT COVER THOSE WITH THE ADHESIVE STRIPPS. Also, the transparent areas of the replacement may be covered with tape. Remove those. You can see the transparent areas in the glass, when you hold it up to the light. Be careful with the tabs on the ribbon cable connectors. They are kind of fragile. Like I said, watch a video on replacement.Bottom line..... great product, be patient, be careful with broken glass.
J**N
Nice Screen
Works well and looks good.Removing the old, shattered screen without it shattering even more was hard. A lot of care was required to ensure glass shards were cleaned up out of the tablet and to remove all the old adhesive. The install was easy and straightforward.This screen does require the reuse of ribbon cables and a small part stuck to the back of the screen. Therefore, care should be taken when removing the old screen so the cables and small circuit card attached to the screen are not damaged.The tools included are a mixed bag. Screw drivers are not required for screen replacement. The pry tool is not great. I used a few stronger metal pry tools I had on hand. The adhesive tape works well, and the tweezers were an absolute must for glass shards removal and adhesive work.I have not tested the s pen.
M**E
First screen not fully functional
Received the screen with no apparent damage. Upon connecting to the tablet and testing, before gluing down, found a dead zone for the s-pen. The issue stretched the width of the screen and about 1/4 inch tall. Image was good and touch functionality was as expected.Requested a replacement and after waiting for another shipment the second worked fine and my daughter is back in business. I ordered the B-7000 glue as recommended in install videos instead of relying on the little tape strips provided.
M**.
Two defective
I received the first one, and it wouldn’t even power on. Okay, what ever, QC just wasn’t there. Amazon sent me a new one, I sent the old one back(because it wasn’t glued down yet). I installed the new one, and it powered on! I was so excited, I didn’t fully check all of the functions. I forced shut it down(so I didn’t need to put unneeded pressure on it), checked all of the connections one last time, and glued it down(I don’t use the strips, as they are horrible to work with, and I’ve gotten light bleed from previous screens using the strips). Well, after it cured, I slapped a new screen protector on, and turned her back on. Lo and behold, the touch sensitivity dosnt work properly! I cannot get it to respond to the touches I want. Sixty bucks out of the drain. I had no other options, as this Digitizer/LCD replacement was the only one with more than 10 reviews for the tab s6 lite. It’s not even worth purchasing another screen for. I would have been better off leaving the old one on.
L**H
My review 5 minutes after completion
Since I am using my tablet to write this review, it worked! It took me 4 sessions to complete, but being a chiropractor this was a pretty fast install.I first had problems breaking the seal. I used a heating pad set to medium for about 20-25 minutes. The plastic spunges don't work well. I was able to insert a small but sharp pen knife. That worked to break the seal. Then I used the mmobiel metal opening tool (Amazon) to insert and slide around the perimeter. You need to continually warm the adhesive to release ( hairdryer). The screen came off fairly easily. I watch numerous YouTube videos, some better than others, utilizing the opening tool.Following the video step by step, removing adhesives, removing and reengaging the 3 connections, using new adhesive strips everything came together. Before closing the 2 pieces, I tried turning the tablet on. NOTHING. No power, no lights. I took a break, plugged a power supply in then turned it on. It powered up. I sealed everything up, took off the plastic covering and, now I am using my tablet.Do not place adhesive over the camera or proximity sensor. The pen works as well. TAKE YOUR TIME. WALK AWAY AND COME BACK. It is not hard (I had removed a screen before to get to a battery in another device).This replacement cost about $50. U break I fix wanted $150, and a new samsung tablet was $400+.Not hard, but tedious. Work slowly and take breaks. It helps with frustration.Good luckPS- it's still working after writing the review
W**E
Well worth it
Kit arrived promptly and included everything needed to install the screen, except for glue (not necessary, but adds extra protection). There are YouTube videos available that help make removal of old screen and installation of new one simple. I had no issues with installation process and my screen works perfectly.
C**A
TABLET WORKING AGAIN
Use my tablet for reading, cracked my screen when i dropped it from bed, this was a cheap and very good image quality replacement. Fits exactly as it is supposed to, all images and colors are as good as when new. Feels like it will last longer than the tablet.
Trustpilot
3 days ago
1 week ago