Note: The color of the item may vary slightly due to photography and your own computer Wiring instructions: ¡¤ B + connected to battery positive group; ¡¤ 3.6V without access; ¡¤ 7.2V connected batteries 1 and battery 2 contacts; ¡¤ 10.8V then the battery 2 and the battery 3 contacts; ¡¤ B- negative battery connection; ¡¤ P + connection charge / discharge upright pole (charging terminal / discharge end share); ¡¤ P- take charge / discharge end of the negative electrode (the charging terminal / discharge end of the share). NOTES: (1) Please note that the input and output voltage, and load current conditions for power protection board does not exceed the allowable power consumption specifications. (2) may occur when connecting the battery case can not be discharged. In this case, connect the charger can be restored to normal operation. Case (3) battery overcharge and over discharge the battery becomes mixed up with the state of the overcharge and over-discharge state, it is impossible to charge and discharge. (4) The protection board the built-in electrostatic protection circuit, but please do not apply an electrostatic discharge protection circuit than the protection board. Specification: Model: WH-3010S34A3 Rated voltage: 11.1V Charge voltage: DC: 15V CC / CV Maximum continuous discharge: 2A Overcharge detection voltage: 4.35 ¡À 0.025V Over-discharge detection voltage: 2.7 ¡À 0.080V Overcurrent detection current: 12 ¡À 1A Resistance: ¡Ü40m¦¸ Working temperature: -40 ~ + 85 ¡ãC Size:40 x 10mm/1.57 x 0.39"(L x W) Weight:1g Package Include: 1 x 3 Cell Lithium Battery Protection Board
Trustpilot
3 weeks ago
3 days ago
