Slime 20332 Inflator Hose Adapter

works great on my Ryobi 18v inflator. slips right on valve with no screwing around. wish i bought the longer one though.

I thought my new electric inflator would be easy to use on all valves with its screw-in connector that would always maintain a tight seal. I immediately ran into problems. The screw-in barrel is solid brass but it is narrow and hard to grip and there are only a few threads available to tighten and even then you have to pull back core to get access to those threads. The result is that it's easy to cross the threads and on some of my valves, the threads were damaged and it wasn't possible to use the inflator at all. I was going to return the inflator for a similar one with plastic knurls on the barrel but one of the reviewers also noted problems with the screw-on connector. There's also the issue of losing a fair amount of air when unscrewing the connector.This device removes that problem altogether. It's nice and short and seems to work on all my valves apart from one that I had to do a special repair on. For that one I can only use a push-on gas station type filler.

Cheaply made. A little difficult to get it to function properly but it does work. Okay for the price.

I'd purchased this to repair my girlfriend's air pump she keeps in her car and works like a charm.

Fitted this to a Makita cordless inflator which came with a screw in valve fitting. The hose simply screwed into the Makita fitting without any air escaping when pumping a tyre. Much easier to use than the original screw in type.

I first bought this when my EPAuto 12V DC Portable Air Compressor Pump, Digital Tire Inflator began to fail and pull air out rather than put it in. may have been a nozzle issue, but after this did not work, i tossed it. upon attaching this unit, it was such a poor fit that air came out from the attachment point. but no air seemed to come out of the chuck. then i tried it on my Goodyear i8000 120-Volt Direct Drive Tire Inflator but it would nor pass air with it on. too bad since it fit perfectly on that pump, nice and secure. and how easy it was to get to securely stay on the valve cores of bike tires. and finally, on the new pump i picked up to travel with - JACO SmartPro 2.0 AC/DC Digital Tire Inflator - Advanced Portable Air Compressor Pump - this chuck will not pass air. fits great on a bike tire but air won't come out of it so there is no point to buying it. waste of hard earned cash.

this air inflator adapter with locking push on connection fits perfectly on my EP AUTO 12 volt DC. tire inflator Model # AT-010-12.. with no leaks. High Quality nylon wrapped rubber hose flexible. Length of adapter is 3 inches long. the push on locking end makes it much easier to connect to the tire valve . than the screw on connection that came on the tire inflator, lots of air would leak out trying to disconnect the screw on end so you would have to go over the amount of air in the tire to compensate for air lost. not with this connection very little lost of air when disconnecting........... I purchased 2 other types of hose adapters before this one both from LUMITECO THEY DID NOT FIT AS LUMITECO said they would !! the connection on my inflater was exactly as the pitcher described and the correct size as LUMITECO said my end had to be. I was getting frustrated till I came across the slime 20332 .. they Guaranteed it would fit and it did perfectly with no leaks. they said that if I had any problems to contact them and they would take care of it. GREAT PRODUCT AND GOOD CUSTOMER SERVICE>>>>>>

I have 3 cars and a motorcycle to maintain. An aspect I am very particular about is to ensure that their tyre pressures are in accordance with factory specifications. I recently bought a portable, digital, automatic air compressor to assist me with that chore, being now rather weary about the reliability of gas station units. However, the inflator hose adapter that came with my new air compressor did not function well in that it was difficult to achieve a seal with the tyre valve and also caused a significant amount of air to be lost when being detached from the tyre valve. The Slime Inflator Hose Adapter appeared to be a cure of my above problem from reading the comments associated with that product, albeit a bit on the expensive side. So, with the aim of ending my frustration with using the air compressor as it was, I placed an order for the Slime 20332 Inflator Hose Adapter. It arrived in very good time seeing that it had to be shipped all the way to Australia. With great eagerness and anticipation, I fixed the Slime onto the discharge hose of my air compressor. Bingo, no more leaking connection problems with the tyre valve and there was just the merest of "pssst" when detached from the valve after inflation. Armed with the digital, automatic air compressor, I no longer consider tyre inflation a chore. Happiness!!