SvitMolds Mold DIY Turtle Shape Stepping Stone Mold Turtle Decorative Stepping Stone Mould Concrete Cement Mould DIY Personalized Manual Garden Lawn Pathmate Paving Pavement Paver (S02)

Amazing mold! This is a very strong and sturdy mold and doesnt bend when filled to the brim with heavy cement. The turtle stones came out easy with a little tapping. We used Quickcrete concrete mix, 4000 PSI and we reinforced it with shredded fiber glass that we bought on amazon. We used 12 dry rough cups of quickcrete (approx) and slowly dripped in about 4-5 cups of water while mixing it. We scooped it in and patted it down until all of the mold was covered. Let dry inside our house for 18 hrs before removing from mold. Then continued to let it dry for another 12 hrs. We are in Fl and its hot and muggy so drying in the AC is much more efficient. We reused the mold 7 times and it held up perfectly

Way better quality than expected. The mold is very sturdy and well made. I was surprised as I thought it would be a thin flimsy material and it's not. The turtle details are awesome. Came out exactly as shown! TIP FOR ARMS- LET DRY fully like 48 hours before taking outside. I was able to demold after 24 hours as recommended, but the arm broke due to Texas heat. I can see it was still drying in that spot on the inside. THE MOLD IS AMAZING AND IS AS DESCRIBED

I've never made anything out of concrete before. My sister is really into turtles so I bought this mold to make stepping stones for her. I didn't know what to expect. This mold was very sturdy and after making 4 stepping stones, it still looked like new. Further, I sprayed oil on the inside. There is a lot of fine lines and texture to the mold. I feared it would not come out easily and it did! Not once did any part stick to the mold and not come out in one piece. Each piece came out super easily and in perfect condition! I was impressed. My sister, who received the gift last night was in tears, it was so beautiful! I used concrete stain and several layers of sealant to protect it, which is why it is shiny. This mold was well worth it!

I am making a butterfly walkway in my garden, this mold is easy to use and produces a beautiful cement butterfly. I have made about a doz so far and the mold is still perfect, cleans up easy. Some days we can get two made ( depending on the weather). I will certainly order other molds from this company.

The mold is sturdy, nicely detailed. The instructional video was great, I like the technique for getting the bubbles out with a hammer drill. Only complaint is that there really should have been some mention in the details that they are sent from Ukraine, it took 26 days to arrive.

This took a little longer to arrive from the Ukrane but was worth it. I have made 5 molds from Sacrete extra strength concrete. 4 per $ 3.80 per bag. I lubricatet it with Pam grill spray smoothed with a paper towel and they cats pop right out. I had other similar cat stepping stones from Amazon. they were smaller and one broke into several pieces with out much use. this is much cheaper if a little more time consuming. I allow the molds to sit over night then turn it out and make another. I do, as one should with all concrete, keep it covered or moist for a day or more. concete does not dry to strengh it hardens. These are twice as large as those mentioned above, heavier thus more stable and stronger. I will wait the month required to apply a sealer to keep them from turning red like the soil here but I will have 8 cat sepping stones for the price of 4 of the others and they were smaller and I will still have the mold to make more if I wish. the concrete does not make perfectially smooth finished stones but one can use other products (search Amazon) for smoothe finish. the few bubble-caused pits donot detract from the cat pose. Oh I dyed one black and there are other colors for concrete die. I think one can apply stain to concete and I may try that to model and orange tabby. I know one can paint concrete but it needs to be touched up often if out side in all weather.

High quality mold made out of thick plastic. Stones turn out just as the picture shows.

After a few attempts I got frustrated as the feet or heads were breaking off. It seems the issue was it was just too hot in Texas for them to set without cracking. Once I moved them inside to an air conditioned room and let them set at least days they came out perfect! The photo is the finished product after we applied a gloss sealer. We used a dark grey concrete color as these were a gift for a dear friend and they requested the dark grey color. Super happy with this mold, just temperature issues in Texas!

Très jolie tortue 🐢

No issues.

Die Form wurde schneller als erwartet geliefert, dann gleich Beton gekauft und los ging das Experiment. Zum Einpinseln der Form habe ich einfaches Pflanzenöl benutzt. Bei den ersten beiden Versuchen brachen jeweils beim Herausholen aus der Form (nach 24 h Trocknungszeit) Kopf oder Bein ab. Inzwischen lasse ich die Schildkröte 3 Tage in der Form trocken und das funktioniert super. Nichts bricht mehr ab. Allerdings wird es wohl eine Weile dauern, bis ich genug Schildkröten für einen Weg durch den Garten zusammen habe.

Au top’

Großartiges Produkt, Lieferung sogar 2 Tage früher. Das einzige das fehlte war eine Gebrauchsanweisung aber da ich über YouTube bestens informiert war, liefen die ersten Schildkröten im Akkord vom Band. Die Form vor jedem Gebrauch mit Motoröl auspinseln, zur Hälfte mit Beton füllen, die Form gut auslegen mit Hühnerdraht und unbedingt Baustahl in die 2 Vorderbeinchen geben, auffüllen bis obenhin, 24 Stunden trocknen lassen, vorsichtig umdrehen und schon kann man mit dem Bemalen beginnen. Macht Spaß!