Hilitchi 300-Piece M3 Phillips Pan Head Screws, Bolt Nut Lock Flat Washers Kit, 304 Stainless Steel

I needed four M2 screws to mount a NEMA 8 stepper motor. M2 is close to the hard to get US #2-56 so as a bonus this set will take care of future designs that require small screws. It has both flat and lock washers as well as nuts.The Philips heads work with a small screwdriver so no tiny hex key is required. The only length the set doesn't have that I would add is 10mm but 12 mm was what I needed for the stepper.

Had all the items in it that comes up unsuspectingly that is not in ones usual tool box. Especially for small hobby stuff.

Perfect size and length to repair my Yakima Skybox hinge bracket. Rivets popped out and I needed some cheap stainless screws to replace. Now my skis and poles are happy to ride above the car and not inside with seats folded down. Thanks!

Fits AMD R9 380 fan shroud. Online specs are difficult to find for GPU card repairs. Ordered these to convert GPU water cool back to air cooled via fan shroud. I lost the original screws when I installed water blocks on my AMD R9 380. These fit perfectly.

I am doing a loto of small electronics work. 4-40 was at one time pertty much the standard - 2.8 mm, this gets intoa smaller size. Will probably look for a 1.5 mm set too

If you are a 3D printer, you’ll come across many instances where you need m2 bolts and nuts. Having this kit is very convenient.

Works great to mount Raspberry Pi's and accessories.

Perfect size for what I need to do. Great not to have to try to find in hardware store.

Bought because screw holes for my computers fans in the bottom of the case were too small for standard fan screws. These were slightly too big to drop in and use the nut but actually groved the case screw holes to fit. A nice surprise that I didn't have to mess around in the back side of the case with the nuts... screw nuts, don’t report this review...Strong, plentiful, everything you’d want from a screw. Would buy again

I'm a hobbyist who has a 3d printer at home and I've been working with this kit recently for my creations. In addition to being rather handy to use as incorporated parts of my creations, they are also sort of a standard in a lot of hobbyist kits - my printer itself, for example, actually uses a lot of M3 screws. I can't say anything cheesy like "Wow! Outstanding quality!" because who am I? A screw enthusiast? What I can say is that I haven't had a single issue with regards to all the parts within the kit work with each other, as well as with other threaded parts.All around, a good product for those who can use it.

Well packaged, returned as it was not what I needed however the product looked good and as always, Amazon has a wonderful return policy. If you are looking for these tiny screws this looks like a well organized pack!

Using these to hold down a valve cover. So far, so good.

Ensemble de mini boulons et écrous rares. For.at 5-40 de différentes longueurs. Exactement ce que je cherchais à très bons prix.