Gorilla All Purpose Wood Filler, Natural Color, 6 Ounce Tube (Pack of 1) - Water Resistant for Indoor or Outdoor Projects and Repairs

I bought this wood filler to fill in the surface of my 3d prints to make it look nice for paint. I also mixed it with acetone, as that is what I have heard works well. For wood I am sure it works great. For surface clarity on plastic, I likely did it wrong. The hozzle also is baffling to me that I could not squeeze any out, even after poking it with a silicone rod. I just got a knife and ripped it open.

I love this product more than I love drywall caulk.Not only does this product come in various colors, but I believe after it is applied and dries, it makes a stronger surface to work with than drywall caulk.When applying it, it is a thick dry paste, because it is a paste with visible grainy ingredients. It is very dry, but with a little water, even just applied to your fingertips, you can easily mold this paste into any shape that your trying to apply it to. Fill holes, fill chips and gouges, fill separated corners, fill the gap of anything especially old houses that settle and adjust and get used and instead of replacing a full wood fixture, just fill in the gap, unless you got a remodel budget.The more water you mix with the paste the more playable the paste becomes, but it doesn't take much water to get the affect you want, playable, adhesive, and moldable.

Would be a good product, however, it was somewhat hard to get out of the tube & seemed a little dry, making it harder to work with.

This stuff is a lifesaver! I’ve used a lot of wood fillers over the years, but Gorilla All Purpose Wood Filler has become my absolute go-to for repairs, touch-ups, and refinishing work. The natural color blends beautifully, and the performance is top-notch, just what you’d expect from the Gorilla brand. The filler comes out of the tube easily and spreads like butter. Whether you’re filling nail holes, dents, or deeper gouges, it applies evenly with no crumbling or mess. It dries quickly (usually within 15-30 minutes depending on the depth), which keeps projects moving along without unnecessary delays. Once dry, it sands smooth without clogging the sandpaper or flaking. It finishes flush with the wood, leaving behind an almost invisible. It takes paint and stain very well, no weird discoloration or rejection. With a bit of sanding and blending, the repair becomes practically undetectable.The neutral tone is perfect for blending with most unfinished or lightly stained woods. If you’re not staining afterward, it still looks great.I’ve used it on furniture restoration (dresser drawer corners, chipped table legs), wall trim and baseboards, door frames and window sillsIt’s held up indoors and outdoors with no issues. I Highly recommended, I’ll definitely be buying more!

Works like expected, gooey and soft out of the container and dries to be come harden. It’s easy to apply and you can always sand away any excess.

I bought this to use as filler for a veneered particleboard table that was damaged during a move. A chunk roughly the size of a quarter was chipped out of it. My plan was to fill the divot in, sand smooth, and then use a touch-up kit to make it less noticeable. This wasn't a particularly expensive table so all I was looking for was for it to look OK from across the room.This stuff was more viscous than I thought, about the consistency of stiff dough. Seems like it should be a bit thinner but the tube hadn't previously been opened so I assume it wasn't dried out.It doesn't adhere particularly well to particleboard. This strikes me as odd because the particleboard is a very irregular surface that should provide a lot of nooks and crannies to grab onto. I'd hate to see what adhesion is like on smooth wood. Forget about trying to use a putty knife to glide it onto a surface. I had the best luck mashing it into place with my fingers.It took me a while to get a glob to stick in place. Once it did, I waited an hour and sanded it smooth. It's very dense so it takes a while to sand and the fine dust will clog paper pretty quickly, but it does provide a smooth finish when you're done.Unfortunately, the putty shrunk a bit as it dried so there is a slight indentation in the middle of the repaired spot. Like I said, the table isn't particularly expensive so I'm not too worried about it, but I expected this stuff to be a bit easier to use.In retrospect, I probably should have thinned a small batch down and tried to work it into the chipped surface a bit better. The color match also wasn't great-- it's a fair bit lighter than walnut. Overall, if I had some more time to mess with it, I might have gotten better results. As it stands, it's a bit finicky to use the first time. Not sure I'll bother with it again.

Works very well for filling in wood holes and dents. sands smooth and accepts paint well. A bit hard to squeeze out of the tube and a bit challenging to spread as it has a gritty sandy texture but once you get it out of the tube and work it in it holds up quite nicely.

Very hard to get out of tube, difficult to get to stick to the wood. Seems very dry. Much more difficult to use than most ice tried previously. I will not be purchasing this brand again. Their glue is great this not so much