WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 25mW FPV Transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone

All in one review:Seller -- sold me exactly what I wanted, for what I thought was a decent price. Thanks.Package -- Nice package. The box was pretty, the camera was safely packed in foam and there was no damage to my package or camera when it arrived.Product -- This little camera does exactly what I wanted it to, so I'm happy with it. I've mounted it to a couple of nano quads with foam tape -- there were no issues with the camera.(Note: if you're building your own quad then you already have a plan to power your camera. If you're mounting it to a manufactured quad,and you don't want to solder your camera leads to your all-in-one mixer board, then you'll want to look for some pigtails (I can't find exactly what I bought, but it's kinda like this: https://www.amazon.com/Spektrum-Ultra-Harness-Single-Battery/dp/B00P7X4F60).Ultimately, at four grams, the camera is a little heavy for a tiny quad, but I haven't seen an [FPV camera/ TX] that weighs less than 4 grams.... I don't know what the range will be if installed on a larger quad, but I'm expecting it to drop out at distances over 50 meters. I've had no problems flying with it indoors.I haven't paired it with a headset. Instead, I tried it with a Virhuk 2" monitor (velcro'd to the controller) -- the image is fine.

Nice little Camera! Works great even with my extremely cheap goggles. Low latency and nice image quality.

I put this little thing on my Eachine H8 mini since it was so small and light, and I've been having a blast! Its not the best camera resolution, but that is what you want if you want to fly in between objects and race since there isn't as much lag. I have never had issues with it (unlike the Eachine H8 mini). I ended up switching out the motors on the quad to give it the power to lift this camera, but that wasn't too hard and I would have had to do this sooner or later since the core less motors burn out after only hours of use. I tried a 200mw on this quad, and I couldn't even get a minute of flight time, so don't go any higher than a 25mw camera. Even though I looked at all the pictures of it, it was way smaller than I thought it would be. I would definitely recommend this for any modified RC's or DIY builds. It is a blast and has always worked great for me.

Bought for small fixed wing rc planes, works better than expected+clear image for the price+easy to use=furthest range I tested at was about 100 yds, signal was still stable-gets pretty hot if it's turned on and not moving, stays cool while flying though-not great low light performance, picture starts to get a little underexposed about an hour before sunset

It's ok, picture is clear ,it's a fish eye lens. Short range, a good running time on 3.7 ,1200wmh.

I have not finished fully testing it yet on an aircraft, but from what little I did notice in the static tests is that it works as advertised and works well at that. We're not talking Nikon or Canon, so for all intents and purposes it is a decent little gem.The cam was only quickly tested for functionality and in low lighting, and it performed as well as can be expected.As for what I personally do not like, but this is not meant as a negative for this brand, the antenna stub is always a pain and I thought that by now manufacturers could have come up with a system that omits the ancient trailing or portruding stub.But like I said, that should not reflect on this manufacturer as most all of them are this way as far as I know, it is just something that irritates me personally, I mean the technology has been here since the last Century so why not be the first manufacturer that can be a step ahead of the game and have a product that is further advanced than most.I would personally pay more for that update if it was available, including an improved range for more distance.Again, so far so good, it works decent and is easily manipulated changing channels and sub channels and will suffice for quickly built rc foamies and small quads.The fact that it works for both my 2.4 and 5.8 goggles is already a good reason to have them.All in all a good product and I would buy it again if needed.Recommend it? Definitely.Hope this was helpful. J.

Added this cam to a RC High Speed 4x4. Works great for FPV driving when truck is out of the line of sight. I had a few crashes, etc, cam took it like a champ. But, one crash was very violent and unexpected and the camera took a direct hit. I was driving on my pool cover, and accidentaly drove under a steel pool railing which basically decapitated the camera from the RC truck, it made a sound like an aluminum baseball bat making contact with a hard ball.Anyway, I figured the cam was dead for sure, no question. I found it, picked it up and lower right area of lens was cracked as well as the lens shaft or whatever it's called. Plugged it back in, it came on and worked fine. Cracked area isn't even visible! This is money well spent for basically a disposable camera that just will not die! I will be getting a few more for back up when they are available.