NEO-TEC NS892 92cc Gas Chainsaw with 24 inch Bar and Chain,2-Cycle Gasoline Power 5.2KW 7HP Chain Saws for Big Wood Cutting,All Parts Fit for MS660 G660

Bought one for curiosities sake, wasn’t sure what to expect. Out of the box there’s some minor assembly required but it started right up and ran. The carburetor was set very rich and needed adjusting before it would cut wood properly but without a load it ran pretty well. After a conservative adjustment - it’s still on the rich side, it rips. I’ve only used two tanks of fuel so I can’t speak for the long term durability but this saw will cut.As you’d expect at this price point some of the plastic feels cheap and the chain tension adjuster isn’t as nice as it could be but it works.The tool kit that came with the saw is surprisingly good and contains everything you need to assemble and adjust the saw. Not Snap-On but it is a nice addition to the kit. Even came in a set of ring compressors (!) for an eventual rebuild? There was a coupon for a spare chain if you send your address and order number to a gmail account and they sent the chain promptly. A nice touch.The saw with a 25” bar is a little over 20 pounds which you don’t really notice when using it but it’s not something I’d lug through the woods for a small job. So far I’m pretty pleased with the purchase, it’s more saw than I need and it won’t replace the MS290 or 021 for general use but the power is excellent and for the price I’m quite satisfied.Time will tell on the longevity, I suspect some tinkering will be required but if you don’t mind or even enjoy that sort of thing this might be for you.

I purchased the chainsaw in November of 2024 and was not able to try it out until April of 2025. After hours of trying to get it started I finally gave in and brought it to a mechanic. The mechanic said it has a broken decompressor and it has very weak spark. Parts are not available.I contacted customer support and I have not had a response after trying twice with e-mails.I would never have bought this chainsaw if I knew about the quality and customer support. I am also disappointed with Amazon having such vendors on their sight! Buyers be ware!

Saw arrived on January 7th. I completedThe assembly and filled the bar oil andGas. No assembly instructions wereIncluded. I've been running saws sinceThe early 80's no problem. The sawStarted idled well and warmed upFor a few minutes. I ran it at mediumRPMs let it idle and shut it off. I feltPleased I, " got a good one". NextDay saw wouldn't start. DecompressionValve kept popping up. I couldn'tPull it over. The saw is totally lockedUp. I've contacted NeoTec regardingWarranty or repair or replacement.This is not a returnable item. I'llWrite further posts as this processProcesses. Pretty disappointed.January 16,2025, I took the saw toOne of my friends to see if he couldShed some light on the starting issues.Aside from the fact that there wereNo instructions with the saw I have toMan up and say I didn't understand theCorrect starting sequence for the saw.My buddy is an arborist who owns aTree service and runs Stihl saws. HePointed out how using the 4 positionChoke/start/run was supposed to work.We got the saw started and adjustedThe idle and high end screws on theSaw. I started it several times todayBut I haven't cut with it yet. More toFollow. Neotec support was quick toReturn my emails and assured meThey would repair or replace the sawAs I don't want to return it.final chapter.I hope. Don't buy this saw unless youHave plenty of experience with sawsOne month after buying mine it'sActing like a normal saw. It's a realBeast. 20+ inch frozen hardwoodNo problem. Lots of torque. You canDog it hard no problem. Ta-Ta.

This saw is very, very powerful. 92cc cuts through everything like hot butter. I was skeptical at first about buying it with some of the reviews but with a little hesitation, I did buy one. I am not disappointed. This thing starts up great. Runs very strong and cuts everything in its path. I would buy it again this was the first of three of the saws I bought from Amazon people can say what they want but for the amount of money you give for these they are awesome and a bonus. They're compatible with either Stihl or Husqvarnas parts

The media could not be loaded. For the price, great saw. We tested it on small tree that fell. We got a 24" inch bar.A few things: item is shipped from manufacturer, not Amazon which made a delay in arrival. Two days after order Bar & chain came first via UPSPS, then 3 days later the machine part arrived via UPS. No tracking for the UPS one. I sent the seller a msg on the day the chain & bar arrived, I got a response 2 days later with tracking from UPS. Communication not the best.Now starting it, watch videos on YT! Factory settings are not the best. You'll have to adjust the high & low needles- they were backed out way too far. Got it started finally by giving it gas. I know a brand new chainsaw is difficult to start, this one will leave you out of breath! No prime ball.No schematics on assembly. Was left with extra parts. One chubby screw that I have no idea where it goes.Another review said to change out the caps that are for bar oil & gas- our bar oil one leaked (see photo- I did wipe some of it off). We will replace the caps.Overall its well built despite the extra screws we have in a bag.The 92cc is great, heavy saw, but worth it.

She is a little hard to start, because of the compression but you have to expect that with a saw this size. I have a 24 inch chain on mine but it probably will operate a 36 inch chain fine, I do not have that size trees to cut, but it sings through a 30 inch with ease.

The only problems I have had is it is hard to start when it's cold and it fouls out the plug pretty often. It runs pretty good once you get er going. You gotta be a man to run this thing all day! It's heavy! I think I would spend the extra money to get a husky.