Right Angle HDMI 2.1 Adapters

Most Cable Matters products have been fine with with me and these are no exception. They are definitely well made, fit nice and tightly and work fine, however I have not used them for 8k or anything very speedy...

With a new wall-mounted flat screen TV with three HDMI inputs (two inputs, one eArc output) I wanted to run all of the HDMI cords behind the wall. I used a single 3-port HDMI wall plate behind the TV and a 3-gang wall plate with a 3-port insert behind our entertainment center. The wall I mounted the TV onto was on an outside wall. The insulation was packed right against the drywall, so ordinary HDMI cord connections would have been a little too deep to use. My original thought was to use three of these on the backside of the 3-port wall plates, however, these were too wide to use two of these 90 degree adapters next to each other with the two different HDMI 3-port wall plates I was using. The HDMI ports I was using had the ports tilted at a 45 degree angle. We had to buy adapters that bend 90 degrees flat (the other 90 degree bending ones) on the center port to clear the other HDMI cables behind the wall ports. However even that proved to be a bit of a problem because you can't connect that contraption and fit it behind a single width wall plate hole. We ended up not using the 90 degree adapter on one of our single 3-port wall plates and just plugged an HDMI cord directly into it. Pushing on the insulation was the lesser of two evils. I wasn't going to cut a larger hole into the drywall just to have to repair it later. I wouldn't knock this product a review point for the size problems when using on a 3-port wall plate. But if you are planning on a similar project, just know that you might have better luck with the other shaped 90 degree adapters, or if you mount your TV on an interior wall, you may not even need to use these behind the wall. These work great. For some reason, one of the HDMI ports on the back of our flat screen TV goes straight out to the wall. With a normal HDMI cable, it wouldn't have fit, but using one of the "spare" adapters, it solved the problem. They seem to be HDMI 2.1 compatible.

Cable Matters always has quality products. These are really good and really compact angled up and down HDMI adapters. It does what it's designed to do and does still give me 4K. A must have if you need to fit your HDMI cable in a tight space. Comes with two adapters one up and one down.

I am using these on a laptop I have placed in a tight rack or shelf. This connector allows me to run the hdmi upwards. Wouldn’t fit the normal way. Did this for power as well.

Good Quality and good value. They were a little tight for my use but that isn't a bad thing.

Works great and very helpful HDMI connector

ok

My mouse being on the same side of my laptop than my HDMI port, I needed an adapter to be able to remove the HDMI cable that was on the way, blocking my mouse's movements. This set provided a great way to do remedy to this issue. There are two adapter in the package, which have two different 90° angle: One that will bend up, and one that will bend down. So, they are not the same. I used the one with a bend up, which was exactly what I was looking for, and saved the other one for a future use on something else when needed.

Özellikle köşe yerlerde çok kullanışlı, kabloların 90 derece dönüşlerini kolaylaştırıyor

Se dietro la tv lo spazio è limitato, questi adattatori sono comodissimi.

It's very good to have one. Useful and helpful.

Perfekt für Geräte die sehr nahe an der Wand sind klappt ohne probleme

Needed these for connecting my pc monitor via hdmi after attaching it to a vesa mount, and realising that it blocked part of the port. Great value for money and does the job perfectly, fitting snugly into the port and connecting fine. Very easy to use and seems like a high build quailty.