Ulincos® Latching Pushbutton Switch U16F2 1NO1NC SPDT ON/OFF Black Metal Shell with Blue LED Ring Suitable for 16mm 5/8" Mounting Hole (Blue)

I originally meant to order a momentary switch but in a drunken fit order this instead. I wasn't sure it would work for what I wanted, so once again, in a drunken stuper I gave it a shot. Surprisingly enough, it works great! It came with a small instruction paper to explain how to rig it so the light is either always on or only one when the button is pressed. I chose the later and it's been working great for the last week or so. Again, time will tell how these cheaper things work out, but up to this point it's been great!. It is well made, and the picture displayed is accurate to the actual product. The company has been great about following up to make sure delivery was on time and the product worked, so I really can't complain.

The switches are nice looking and they feel quality, but I ordered two on-off switches and on one of them I soldered some leads to it. The switch still works except now it is a momentary switch. What I mean is when I attach it to a load it works as advertised but doesn't stay on when I let go of the switch. I am not sure what happened internally but after I soldered the leads it is not an on off switch anymore. That tells me it is pretty delicate. I might be able to use it later as a momentary switch, but for this application I wanted to have matching switches but they are too delicate, if I cannot even solder some leads to it. For those that only need a momentary switch, I would give it 5 stars, but for an on-off switch they are way too delicate and too expensive.UPDATE: I changed my rating to 5 stars. After my review the company sent me an email stating this:"When soldering it, it's better to finish the soldering in 3 seconds. Or the lock in the switch will be broken then become a momentary switch"Even though I probably broke the switch, they sent me a new one. The customer service was outstanding. So if you have an on-off switch, and you are going to solder leads on it make sure to tin it generously and solder quickly. BTW my other switch worked fine after the solder.Mine are red, and they actually look better than the picture in my opinion.

Needed a low voltage switch for a boom box project. This one works well, has good on/off action, and can be wired to be illuminated when power is on or power is off or always....Works well...I have purchased this switch numerous times in both red and blue illumination.

These little switches are amazing. I love the way the look, and feel. The white light isn't too bright to be distracting at night, but bright enough to be clearly visible during the day. I have mine wired to the parking brake lead on my remote start system. I have a manual transmission so this button has to be pushed in order for my remote start to work. It's just a extra step to make sure the transmission is in neutral. Also I can turn off the remote start completely using this switch if someone else is driving my vehicle. Overall I highly recommend this switch. They look and work fantastic!UPDATE: It's been a couple months and the switch is still functioning perfect. Very happy with the switch!

Dear Seller: I accidentally ordered this one instead of the upgraded version, I didn't realize until i had it in my hand and saw it wont fit the pigtail for the upgraded version, it was too late for me, I needed it to turn on my battery voltage sensor in my car and I had everything dismantled waiting for the delivery, I decided to just try to use it still.. couldnt be that hard... soldered one on the negative, and as soon as the solder touched the NO1 prong i heard a click, i didnt even get to hold my iron to the prong, the heat of the solder alone and the switch stopped latching immediately.. Its so tiny and so fragile then to solder it and it breaks. :( I wasted my money and my time.EDIT: Was contacted by seller and sent the upgraded switch with a pigtail. it arrived 2 days after my first review. These guys are the best and that switch is nice, pics of after install b4 i painted and cleaned up my mods. I def will be buying from these guys again. Most likely more switches and a car backup camera.

I've had one of these on my atv for several years now for underglow lights and it works like new even being in rain, riding through creeks and even sunk it once. Bought another to tap into cooling fan so I can turn it on anytime I want. Be sure to get the wiring harness that fits these buttons Makes it like factory wiring and easy to take off if you need to work on something near the switch.

So this switch came exactly as described. And looks to be a quality made switch. However, pay attention to what it is youre ordering, unlike me. I did not realize ( or read the reviews ) that tbis switch requires that you solder the wires to connectors on the butt. I have reached out to Ulincos in hope of them allowing me to exchange the switches for some with pigtails available ( even though I take full responsibility for the mixup ). I'm hoping Ulincos will show mercy, and allow me to make the swap pain free, as well as guide me in the right direction for the switch it is that I need. Let us hope**Update** So these guys have by the best customer support team ever. They didn't just send me an email asking what they could do..... They sent an email saying they had already done it. They created an order with 2 switches and 2 pigtails, shipped to me, free to me, no questio s asked. Uodated to 5 stars, regardless what they replacements look like or how they function. Broken or not, your customer support had earned you permanent buyet.

I bought 4 of these switches and spent a great deal of effort soldering wires to the tiny rear connectors (I already knew that was coming thanks to comments from other users). I drilled holes and installed them in my dash (which I had to disassemble) only to find that 2 out of 4 were defective. This is unacceptable for a switch that costs near $10. It also makes me wonder how long the other 2 will last.Update: Shortly after posting this review, I received an email from Ulincos apologizing for my troubles and they sent 2 replacement switches, which I have not yet tested. I must give the vendor an A+ for effort.

These switches are great quality, the light is perfect. The drawing they sent me for make a 3 way switch and having it illuminate only when the load is on was slightly incorrect but customer service is great.

Good product. One was defective. It was replaced with absolutely no problem. Very impressive and trustable supplier. Quick delivery.Thanks !!!

Works nice for the guitar I put LEDs on.sits nice and flush ald lights up well.pig tail way to expensive and unit could be a bit less lengthy

UPDATE: Reducing my rating as after minimal use, the LED no longer works. It was imperative that I have an indication of when this switch is on/off for the application, so I have now had to purchase a new switch locally.ORIGINAL REVIEW:Great looking switch.Does exactly as expected. I wired it to control an accessory in my truck and have it wired for the LED to be on when the accessory is on.I had a bit of trouble wiring it up due to have close the pins are on the switch, but that's just due to the wiring I used.Product is as advertised, and LED is very bright.

I use this as an on/off switch for remote radar detector in the car. It blends in nicely being black. Only minor complaint is that it is actually too bright so I will likely wire some resistance into it to dim it a bit. Better than not bright enough.