Master Airscrew Stealth Propellers for DJI Mini 2, Mini 2 SE, Mini SE & Mini 4K - Red, 4 propellers in set

Is a bit quieter, but makes my drone easier to spot. Well made. Very confident in using them.

Definitely quieter but just a tad too much Loctite on the screws but definitely worth the money.

Bought for my DJI mini 2 after a bungalow stepped out infront of it while it was minding its own business and gently flying over our front garden snapping the tip of the original propeller.These work very well and a very pretty colour

I've been contemplating buying some of these Master Airscrew props for some time and just decided to bite the bullet yesterday.They look fantastic and, once correctly fitted (see comments below), they do produce a different, more pleasant tone. The red colour that I chose also looks better for VLOS.5 stars for the blades alone, but 1 star (0 if I could) for the screws. Despite the screws being the same dimensions as the stock DJI ones, they are of a poor quality. After installing the props initially, I wasn't overly happy with how the screws did up. They don't screw in as comfortably as the stock ones. My initial flight was a little noisier, albeit a different tone. It was only when I re-examined them that I discovered each motor had 1 half prop sitting at a slightly lower angle than the other. Probably 5 degrees difference, if that. Unscrewing them, it was evident that they have a slight kink in them. Having removed them, refitted the original DJI screws and put a tiny drop of thread lock on (a very tiny amount is all that's needed) they all screwed on perfectly straight. My test flight was perfect now, with a decidedly quieter and more pleasant tone in flight.There is clearly an issues with the screws that Master Airscrew include. I could have sent them back, but was happy with the fit once the DJI ones were used. Many won't have lock thread at home though, so you may want to consider using new DJI screws instead. To be fair though, they'll probably be fine without thread lock, but it was for my own peace of mind.Definitely recommended as props, but don't go near the screws.Update...I've uploaded a macro photo (sorry Bout the poor quality) of one of the screws. You can clearly see that the thread isn't straight in line with the rest of the screw.

Comes with screws also. If anything I would say that these are a touch louder than the standard! so am perplexed as to why these are marketed as stealth. definitely either the same or louder than stock, especially at heights it is more noticeable on speed mode. I would not buy these for reducing noise.On the whole, they are fine, red is easier to see for GVLS. maybe a touch more agile on the uplift I noticed but all in all nearly the same.7.5/10

First impressions very poor. Blade edges not finished, lots of swarf. That cannot possibly be aerodynamic! Screws provided have strange small cross head that does not fit the normal Mini 2 blade screw. I will try to fly with these blades once & will share review. For now I'd suggest AVOID!!!Ok I've flown the Mini 2 with these blades. Noisy & unstable!! Awful, that's £16 going in the binWhat a con in my personal opinion

Great product repeat customer

I was disappointed with the quality of the item. Bits of thin plastic exist randomly around the blades.