Supershieldz (2 Pack) Designed for Samsung Galaxy Z Fold 3 5G Screen Protector, (Full Coverage) High Definition Clear Shield (TPU)

I have a preference for applying screen protectors in a very humid area, so a good way to be sure before you apply the screen protector for any phone, device, etc, is inside a bathroom after a shower or run hot water for a few seconds till the air is humid. Helps keep dust out of the air and helped apply other screen protectors. In the regards for the tips above, the installation of this screen protector went great with my installation methods to avoiding dust floating in the air to stick between the screen and folding phone screen. Applying the screen protector was easy, gently ensuring to push the protector over the middle of the folding screen and then rolling it to the other side of the phone screen. Have had it on for about two weeks before reviewing and had absolutely no issues with any bubbles popping up in the folding portion of the screen protector with this kit! Great value for the kit to have two in the event the middle of the folding screen lifts up again later on in the life of the phone as like the original screen protector did. The texture and feel of the screen protector isn't exactly identical, but probably just the feeling of it being a new protector instead of one that I had on in the past for awhile, feels soft and mushy; folding phones have to bend so a protector can't be too rigid or firm. Feels great and doesn't leave fingerprints when tapping on the inner screen of the fold 3. There's no discoloration, so looks clear and great as like an original screen protector, fits perfectly!

I waited because I didn't want to void my warranty but this phone is junk in some ways and it's out of warranty. To replace the covers at samsung they wanted my phone for like a week or it would be a few hour drive. Taking off the factory installed version was crazy satisfying.

These screen protectors for the Fold 3 cam with two for the inner screen and two for the outer screen. I was a bit worried about replacement ng it myself because I almost always get bubbles and Samsung doesn't recommend the user replace the screen protectors themselves. The inner OEM protector seemed to always bubble after a time. When I took it in to my carrier the first time because of this, they told me they had to replace the whole phone and did under warranty. Annoying, but whatever. Then it happened again and they replaced the entire phone again. So annoying... But okay Then it happened again and I was over having to reset my phone and security settings for allowing new devices etc. I decided to just try to replace it myself, and if it sucked, I'd replace the phone with a non-folding phone out of frustration. I bought these screen protectors and gently removed the inner and outer OEM screens using a sheet of copy paper as recommended by Samsung. I cleaned the screens and began the attempted install of the inner one. I messed up bad die to misunderstanding an instruction, but there's a second one. I carefully cleaned my screen again and this time pulled the right tab off the protector to install (my mistake the first time was I inadvertently pulled tab 2 off completely - don't do that). I pulled of tab 1, lined everything up, lifted tab 2 to get a little bit of the sticky exposed and begin pushing it onto the screen using the squeegy provided. It went on smooth and no bubbles other than very minor ones at the crease, which were pushed out easily after install. I moved on to tab 3, removing only the inner edge and slowly used the squeegy to put it in place. Perfect. No bubbles. I then pressed the squeegy along the seem and the little bubbles left vanished. I squeegeed the edges and pulled tab 4 off. It was perfect! On the outer screen, the tab 4 cover was actually a little larger than than the actual screen protector by micrometers, it seems. So, when I first began installing it, I thought it was misaligned. In tried to redo the alignment, but sadly couldn't save the protector. Thankfully, there was a second one. I managed that install fine, but still couldn't figure out the slight overhang. It was toouch to tuck around the edges. Eventually, I figured I'd pull tab 4 off to get a better look. That's when I realized it was the outer tab 4 protector causing the overhang look. Hence the 4 stars instead of 5. But, I easily pressed the edges firmly down and again - perfect. No bubbles. The protectors feel and seem to function very much like the OEM versions. I've had them on a few days now and so far, all is good.

Excellent case

For the Galaxy Z fold 3 you don't have to worry about an on screen fingerprint reader cause it's on the side. These do come in a 2 pack for the front and inner screen for the phone. I only got these for the front screen as I have no plans of removing g the inner screen. It does come with some strange instructions which to me complicates putting the screen protector on however I do like that if you can get the screen protector on then it fits just like the original one that came with phone. Unfortunately because I found difficulty with the instructions I ended up with a few bubbles that are said to go away with time. Other than that it's an ok product...the part that I used

Followed the instructions and used the included kit. They applied perfectly. They're a little softer than the factory screen protectors, so your nail can gouge them if you apply too much pressure. Learned that pretty quickly for the outside screen. Not too noticeable though. I've been using these for about 5 months now and still going strong. The corner on the outside screen has peeled up a little, but luckily enough the product includes two protectors. I will probably be buying these ones again when it's time to replace.

DO NOT PURCHASE. WILL DAMAGE THE PHONE SCREEN. i just purchased the galaxy z fold 3 and was excited to try a screen protector since ive never used one before. the protector was simple enough to install but lasted maybe 24 hrs before i had to take it off. every time the phone is folded a large bubble developed along the fold line and the edges began to curl back. the bubbles could not be smoothed out despite repeatedly using the edge gadget included in the kit and despite the fact the instructions guarantee the bubbles will resolve with use. the bubbles just got worse. worst of all, when i gently removed the film i discovered that the adhesive detached sections of the existing screen layer and caused bubbles all over the surface of the phone. ive been able to smooth out only some of these but essentially the phone screen has been ruined. the external screen was barely better. it was slightly too big for the screen resulting in edges detaching repeatedly as the phone is handled and it was impossible to get all the bubbles out. removing it did not appear to cause the same damage to the outside screen as it did to the internal screen

I recently replaced the screen protector on my Galaxy Z Fold 3 with the Supershieldz protector, and I must say, the results have been outstanding. Previously, I had been relying on the Samsung store for replacements at a cost of $25 each time. However, after testing the Supershieldz option, I am thoroughly impressed. Despite some reviews mentioning potential bubbling issues, I followed the provided instructions carefully, and the installation process was seamless—resulting in a flawless, bubble-free application. The fit and clarity are excellent, making the screen appear as pristine as new. While I can't yet speak to its long-term durability, particularly around the hinge area, my initial impressions are overwhelmingly positive. So far, it has exceeded expectations in both quality and ease of installation, making it a fantastic alternative to the pricier in-store replacements.

It seems working good for few weeks, easy to apply,instructions are clear. Bobbles disappeared after 1 day. Now lets see how's the durability.

I am fairly satisfied with its performance. However, I did encounter a frustrating issue with the protector coming off from the edges of my mobile, despite following the instructions diligently and ensuring a thorough cleaning of the mobile screen beforehand. In an attempt to resolve the problem, I decided to try the second one in the package and unfortunately, the second one suffered from the same problem along the edges. Although the screen protector exhibits good quality in terms of protecting the screen from scratches and daily wear, I found myself disappointed with this recurring issue. It was disheartening to see the protector lifting and disrupting the overall appearance and functionality of my device. In conclusion, the screen protector I purchased had its merits, including good scratch protection and enhanced visibility. However, the repeated issue of detachment from the edges was a major drawback. I hope the company takes note of this flaw and improves their quality control measures to ensure a better user experience.

I'm happy with these protectors. I just wish my Z Fold 3 screen had lasted long enough to wear out the protectors lol. The replacement screen also died. Protectors are great though.

This is an excellent shield! Quite easy to apply. I did have quite a few small bubbles I couldn't get out. Waited 24 hrs and they had all dissolved. Magic!

I don't understand why there are so many negative reviews for this product. Take your time, pull the right tabs off at the right time and make sure you have a clean screen. Put effort in lining it up right an youll have some screen protectors that are even better then the stock ones. No bubbles on mine an have perfect coverage. Will buy again once I go through the 2 screen protectors I got.