J-B Weld EPOXY Mix NOZL 2PJ

These nozzles fit the JB Weld twin-syringe epoxy products. Without the nozzle, the twin-syringe dispenses equal amounts of epoxy and hardener that you must mix and then apply to your project. Oftentimes, you would like to be able to be precise in the application, which is difficult with a puddle of mixed epoxy when the clock is ticking. That’s where these mixing nozzles come in. They use what is called a static mixer in the nozzle tube to thoroughly mix the two components. Static mixers are common in industry and work very well to effectively mix the two parts as they flow down the length of the nozzle. The tip of these nozzles narrows nicely for precise control of the application. The epoxy curing clock starts when the two parts enter the nozzle, so as long as you are using it continuously, it will continue to flow as you are pushing it through. Once you stop pushing it through, what remains in the nozzle will harden inside the nozzle. So, when you’re done applying, remove the nozzle and through the nozzle away. Then, reinstall the plug into the twin-syringe and the epoxy parts will keep just like a new, unopened tube. You do lose a little epoxy product when you throw away the nozzle, but that’s the trade off for having a precise nozzle for application. Great product when you need it.

Great product! Works great! Highly recommend!

Must have for epoxy needs only downside is you waste a little bit in the tube

This nifty little doohickey makes using epoxy easy. It screws onto the J&B syringe and as the two separate compounds move through the mixer they combine. By the time the mixed epoxy comes out the end it is ready to use. I used this for applying lines of epoxy to metal brackets that I was joining and it kept the epoxy where I wanted. My sole complaint and reason I did not give these a 5-star rating is that there is no way to clean them out to reuse them; they are use once & toss. I should also note that these only fit the J&B product like of epoxy syringes. Still well worth the price!

Works better than the off-brand knockoffs. Mixes properly. FYI if you need to purge the remaining fluid from the nozzle, pull the plunger all the way out and reinsert to force the air through. Bigger projects will require multiple tubes and nozzles. idk why retail stores don't carry these anymore.

I needed to get some epoxy in a hard to get to place. These are adjustable too, but the smallest hole it came with was perfect. I will always keep some of these in my tool box from now on.

The product itself is fine. I returned because website information indicates 4 static mixers but only two were sent. FIX THE AD.. Will not purchase from this seller again

Nozzles do a nice job, keeps it neat without much mess!