ATOPLEE 2pcs LCR Meter Test Leads Lead Clip Cable Terminal Probe Wires,with 4 BNC Electrician Test Leads Kit,Digital Electrical Test Probes Set for LCR Meter Multimeter

Good quality calvin clips, i recommend!

If you're reading this, odds are you are a technically inclined, capable and competent individual. That being said, you will need to check the connections on these before use. Mine came with poor solder joints on 2 ends, causing my LCR to fail calibration intermittently. Once I took them apart, installed some nice 1/4 inch wire braid, remade the connections, and what you see is the nice, clean result. The clips themselves are very good quality, as are the 4 transmission lines (RG174U=50-Ohm multi-strand coax with 2-layer foil shield + multi-strand outer conductor). I toyed with the idea of replacing the RG174 with some high $ solid core RG174 while it was apart, but decided the trouble/benefit ratio was too small. I have these mounted in my DE-5000, and have never had a problem with open/short calibration since I've fixed them up. Great leads. Buy a set.

Just not high quality to rate another star.

Just modify the lead attachment (the one with the 2 inch leads on it) recalibrate and it works well.

These were recommended for an application in making accurate LCR measurements. They work well. The spring clasp tension is firm but not tight. I like the wiring arrangement from the clips themselves. Very satisfied.

Ordered these for an LCR meter I salvaged and they work perfectly.

The best upgrade to make the de-5000 even better in all ways possible.

Well made, and greatly increased the utility of a DER DE-5000 LCR meter. Some disassembly/re-assembly required to replace the tiny alligator/crocodile/T-Rex clips that were included with the meter. Highly recommended.