AcuRiteIris 06052M Remote Battery Pack for 5-in-1 Weather Sensors

Easy to install. Works great and makes battery change easier.

Great Idea, well made!

So far so good no problems.easy to install.Only problem I had was zip ties were too short had to use my own.Other then that no major problems. Been up now 1 week.I've had my weather since 2018

I have had my Acurite 02064 weather station for about four months (bought here at Amazon). I have been running it on Weewx software on a Raspberry Pi which gives much more realistic account of what the Acurite is doing than "myAcurite" would give*. Weewx monitors signal quality from the outdoor sensors and displays it on a graph. Most notable trend this summer was, as the batteries aged the signal would go out usually in the afternoon when components in the station heated up. After a month, I got the remote battery holder. Now I could change batteries often, and I had to. The heating problem persisted but started up after the batteries had been in use less time than without the remote holder. That makes sense because the battery voltage drops along the long wires between the station and the remote holder, so new batteries start at a lower voltage and go lower with age.So I got a little (one amp) twelve volt wall wart and connected two voltage regulators (available at Amazon - search for eBoot 6 pack LM2596 DC to DC buck converter) and tweaked their potentiometers so the output voltage was 3.5 volts, high enough to give "new battery" voltage to the station that wouldn't go lower with time. Perfect! Not a glitch in signal quality so far. It hasn't been tested in the hottest summer temperatures, but it's the best this weather station has ever performed.The remote battery holder is marked with two batteries in "bank 1" and two batteries in "bank 2". Within the banks one side shorts the batteries together (easily seen) and the other side has separate connectors. Connect the voltage regulators to the side where the batteries would NOT be shorted together, one regulator for each bank. That's all there is to it.* It seems to me that "myAcurite" (the Windows software meant by Acurite to be used with this station) just keeps displaying the last received data when its sensors are not communicating (as though that were currently accurate) and falsely reports that it is continuing to receive data.

I wanted to mount the AcuRite weather station on my shed with a short mast but was concerned about changing batteries 12 feet above ground. Then I found this remote battery pack. It installed easily and works as required. There are 2 things to be aware of during installation. 1 The remote battery adapter needs to be aligned carefully into the station battery compartment and snaps in hard. 2 Be attentive when snapping the 3 cable clips into the sensor housing because once they snap in they can't be removed to reposition. The 30 feet of cable is plenty long.

I can now change the Batteries In my Accu Rite Iris on the side of the house versus climbing on the roof. the unit end snaps tight into the battery compartment & the rest mounts on a wall of your choosing (there is 30 feet of cable from the unit to the battery compartment).

What an Idea!I just got this one and installed it.The install is super easy; just like putting in batteries.The card is very long to accommodate those that are going to the max 33' or so.Since I didn't go that high I just tucked the left over cord inside the mast to make a neat finish.Now when it's time to install new batteries, I can just walk up to it at ground level and put the batteries in which my wife loves.Even though I'm in great shape, it would be a shame to have a fall from the roof one day trying to change the batteries out of my 5 in 1 weather station.Great product but should be incorporated in new versions as the added cost would still have the 5 and 1 at a very competitive price.

The 'Remote Battery Pack' is a must have for anyone with an AcuRite Weather Station. The higher you can mount your station the better the better the accuracy of the wind speed is. Mine is on mounted on an 8' pole that is attached to the roof of my house. Without the battery pack I would not have been able to mount it that high, nor would I have mounted it on the roof at all. Have the battery pack mounted under the roof of my porch, means all I have to do is walk out to my porch to change the batteries. No issues with weather and no ladder needed. It has its own mounting bracket built into the unit, and it is easy to open the cover to get to and change the batteries. A very well designed product with ample cable provided, so that you can mount your weather station in an effective location, and still safely change the batteries.