Marada X Frame Steering Wheel Stand Racing Sim Cockpit with Seat Slot Fit for Logitech G25 G27 G29 G920, for Thrustmaster T300 T248, for Fanatec, No Pedal & Shifter

It was an easy set up and works just as advertised.

This wheel stand is amazing. It was very simple to assemble, came with nuts and bolts to mount wheel pedals and shifter (including tools to install). The wheel stand really helps with the immersion of sim racing. Everything is very sturdy and will for sure last a long time. The wheel slot for the office chair could not be better, your chair will not slip out of it. And to add on to all the great things about this wheel stand... basically every part has some sort of adjustment capability to make the wheel stand to your preference. All in all a great wheel stand and will lasts for years, and a great value for money.

Summary: Great value for entry level sim racing. Requires some effort/creativity to make some racing components compatible. Posture may be an issue depending on your chair’s adjustability. Pros: -The carbon steel frame is sturdy enough to handle my Moza R5 (5.5nm) wheelbase without any flex or movement at all. -The wheelbase plate accepted my Moza R5 wheelbase without needing to modify it at all. -The chair trapper works well, even with a 200kg load cell brake pedal, my chair does not move or tip. -Comes with shifter/handbrake platform -Cup holder is surprisingly valuable feature for long races. Cons: -Pedal plate is only designed to accept pedals mounted on a separate base, specifically, Logitech G series pedals, so not all pedal base plates will be compatible either. I needed to drill holes into the steel to mount my Simjack UT pedals to it because I don’t have the base for them. - The handbrake mount does have some mild flex. Nothing crazy but you will feel it when handbraking. This is not due to the quality of the metal, but the design for fastening it to the wheelstand. - Since this is designed to be used with a desk chair, unless you have a fully adjustable backrest and seat, posture can be very uncomfortable with regular use. This isn’t necessarily a flaw with the wheelstand, but with desk racing itself. After a couple weeks of regular use, my back is starting to hurt constantly, as well as my thighs. So this will work best for people with fully adjustable gaming chairs. Overall: For roughly $100, I think this product exceeds expectations. It definitely has some drawbacks compared to a full profile rig, or more expensive wheel stands, but it’s absolutely great for entry level sim racing/rally.

Sturdy frame that I have had for about 9 months now. I have a steering wheel, 3 pedal set, shifter, and e-brake. This frame holds everything well and hasn't had any issues. I also love the fact that it folds up, even with everything attached, so I keep it folded and leaned against the wall in the corner of the room.

Great for the person who doesn’t have room for a dedicated rig! Easy to assemble and very sturdy. Even has a cup holder…Who doesn’t want a cold drink even while racing! I love that it folds up for easier out of the way storage.

For it's price is perfect, I use it with a G923 and feels very sturdy, no movement on the structure even during hard braking

it does the job and comes with required hardware but unfortunately has way too much flex for my fanatec csl dd 8nm, fanatec loadcell pedals along with the h pattern shifter. would be fine with lower power like a logitec g920 but the pedal plate wobbles under braking with the load cell brake making braking inconsistent and harder to hit braking point. the shifter mount has so much flex due to being thin pice of stamped sheet metal with no bracing it moves so much when shifting that is sometimes causes a miss shift due to the lateral movement and the relatively stiff fanatec shifter. the wheel mount again is just super thin sheet metal and defects in horizontal and vertical twist (being much worse) so the wheel has some slop in force feed back and when you are having to wrestle the wheel in some intense action the wheel with move up and down up to 3 inches total and there is almost no flex between the wheel and be base with the qr2 system but the stand it self just has that much deflection which is distracting and takes away from the immersion. so time to make space and get a aluminum profile rig.

This sim rig is good quality for the price. I wasn't expecting it to be as stout as it is to be honest. It folds down nicely, I fold it and lean it against the wall next to my computer. The instructions are straight forward. The fact that it comes with the mounting hardware for several sim wheels is a huge plus. My Logitech G29 mounted up and there is no play. Only reason I didn't give it 5 stars is because there is a little bit of side-to-side wobble on the side tray that holds the shifter and handbrake. It did drop while I was moving it across the room and the cup holder bent, but I just bent it back into place with no issue. The tray on that holds my gaming chair is really nice as well. All in all I'm super happy with my purchase since it doesn't take up the space of a whole legit cockpit and still holds the chair in place so your not wandering around every time you hit the brake.

It's great, solid, handles moza r12 v2 pretty well but I wouldn't go over 8nm on this unless you've got a lot of weight on it

La base para volante con el “chairlink” está increíble, la silla no se mueve al usarlo. Lo recomiendo ampliamente.

Easy setup, it also came with a lot of extra hardware for mounting stuff.. it’s very sturdy and my Moza racing DD base lined up perfectly on the base plate all four screws lined up perfectly with the holes

Me pareció muy bien el armazón fácil de armar sirve para mi propósito y si se ve resistente y la opción de anclar la silla del escritorio es genial le doy 5 estrellas

L’objet est très versatile et fonctionnel. Il permet d’installer les volants et pédales tel que prévu. Il est solide et la finition est correcte. Pour le prix, c’est presque parfait. Les bémols: - C’est une finition noire marquant facilement comme tous les autres objets de ce genre. - Certaines pièces mériteraient des bordures en caoutchouc/silicone. C’est facile de s’accrocher et se faire assez mal. - C’est impossible de bien serrer les écrous avec la clé fournie. Il faut avoir une clé à rochet métrique pour bien y arriver efficacement. - Pas de gestion des câbles. - Manque des trous afin de poser le bac à roues plus près. Pour les enfants, on met l’ajustement au plus court et les chaises à l’intérieur de la zone vide. - Le pire (ce qui a fait perdre les étoiles): il manque sept écrous dans l’ensemble afin de bien poser toutes les pièces selon les instructions. Nous en avons acheté deux, et les deux ensembles ont ces sept écrous manquants. Oubliez donc le porte-gobelet, le bras de vitesse et le frein à bras à moins de passer à votre quincaillerie locale!