TEMO0.5 Micron 5gram Diamond Polish Lapping Paste Compound Syringe Final Finish

This does work great but I had some trouble at first. My final grit when sharpening is 10,000 and at first my strop loaded with this compound was leaving bigger scratches on the edge, which led my to think this compound is lower grit than it claims. However the problem was in how I was loading the strop, now it removes the 10k grit scratch pattern. I'll try to explain how to load the strop. First it needs several hours or better yet overnight to dry. When I first loaded the strop I used a few drops and a plastic spatula to cover the strop surface and then let it sit. This didn't work. Now I use a few drops and work this in with my finger tip, if it soaks in immediately I'll add a little more, until the surface feels saturated (this still isn't much, maybe 4-5 drops total) and then keep using my finger to work it in until a nice flat, even sheen appears. Then I leave it to dry overnight. This sounds way more complicated than it is, just make sure you work it in, with and against the strop grain and make sure the compound itself is thoroughly mixed up (no big shiney flakes in the mixture and no spots on the strop where it's thicker or thinner than any other spot).Now it's great and leaves an edge that has a scratch pattern very difficult to see even with a magnifying glass and feels like it's melting through phone book paper it cuts it so cleanly.

Lo compré para pulir cristal de zafiro y la verdad que Le quite parte del roce gordo que tenia,

After reprofiling My mora light my fire I had the blade to a 3Micron finishThen I used some brand new strops and finished the blade off with the 0.5 Micron compound.I don't a higher polishing compound then this.I used on my wicked edge system leather strops and just look at the result

Works great...more aggressive than poly watch. This stuff worked better on hardlex watch crystal.

I bought this product to use on my Panerai crystal, it had one deep rub mark and one small scratch, the small scratch can be seen near the center left of the dial in the second picture. The last shows a completely clean dial. Prior to using it, I tried various methods to remove them but nothing worked. It literally took a total of 15 minutes to remove both the scratch and rub mark. I used my Dremel with a polishing bit, I seriously couldn't believe how great a job it did. This product will be my go to for now and ever. Very happy customer.