inGCO Auto Ranging Digital Clamp Meter TRMS 6000 Counts Measures AC/DC Voltage AC/DC Current Resistance Capacitance Diode Test Temperature DCM6005

Not as sturdy as my Klein. the plastic is hard and slippery. the cogs on the side help but the rubberized sides of the Klein 200 are much easier on the hands. I don't have standard lab equipment so I can't say if it is accurate. I do have 4 multi meters so I test them. All including this one measured the same aaa battery at 1.530 volts within the range of 1.528 to 1.531. So it is consistent with the others. All professional items. I like the hall effect current device and the voltage finder. Beeps slow for 5 v and fast for 120vac. Temp measurement is not that good. Mine reads about 6 degrees high. I thought it was the thermocouple but when I used the thermocouple in my recording DVM it read the correct temp. And I do have a lab standard thermometer to test that. As long as I know it reads high I can deal with it. The lowZ works great. Back to Simpson days. I only used the DC current and that was correct too. It was the first time I used a clamp on DC meter. To test this one I just used a 100 ohm resister and variable power supply. It always was within 3% of calculated at between 5v and 30. That covers my car which, is what I bought this for. Overall a good buy. Nice enough to give as a gift.

As an electrician it was important for me to have dependable meter with true RMS for accurate use, also it is a bargain price

The photo with the bluish ting was my attempt to capture its international orange color. You won't look like you went to the Dollar Store to pick up this meter, it's professional looking gear.This is a hall effect DC amp meter, so you'll want it for measuring from 1 amp up to 600, AC or DC. There is no milliamp function, you'll need a standard DVM for that. This is for looking at incoming amps into a building, or the starter motor current on a gas or diesel engine.Does, however, have functions for ohms, temp probe, frequency, diode test, and capacitance. This is great field meter, and is fairly compact. The included carrying case is about 8 x 4 x 3 inches.Also includes a thermocouple probe and shortish test leads. I've generally used Fluke DVM's in my communications work, and I use a good set of test leads from one of the Fluke meters with this one. The included ones are okay, just annoyingly short. I knocked off one star because of the short leads.It's also 0.02 volts off, but that's good enough for most field work, or troubleshooting automotive items.Uses two AAA alkaline batteries. EBL rechargeable batteries work fine, but it will perpetually show a low battery symbol.

I bought this to test air conditioner capacitors , works great. Great price, used many times for a few years,without any problems.

This meter is easy to use and easy to read. I'm pleased with the overall quality and engineering. The carrying case is very functional as well. If I had to purchase another meter I would look closer at getting one that was able to measure start up amps (motors, A/C units etc) but that's probably not an issue for most. I would definitely recommend to any one needing a meter to occasionally measure just about anything to do with electric circuits.

Great for electrical testing. Use for testing amp draw when vehicle is shut off. Test for non contact low voltage dc. Also has temperature testing. Many other modes-ohms, diode testing and more.

The product works just ok. The price is reasonable. The readings seem accurate but the auto ranging function doesn’t seem to work very well if at all. I have to manually select the scales for current all the time. The backlit function cannot be left on constant and by the time you get the meter situated it auto turns off. However , the biggest complaint is that the probe leads are just too short. You either need a third hand or you have to have a surface right next to you to set the meter on. This is a pain when trying to measure things like AC units that require you to carefully manipulate the probes because there are live circuits. You find you are moving the meter around with the short leads. Then you have to put a lead down to readjust the position so you can read it. While re-adjusting, the back lit light goes off and you can’t see the display.

equipo pequeño con características envidiables, muy adecuado para los trabajos