Dorman 751-712 Rear Driver Side Power Window Regulator and Motor Assembly Compatible with Select Ford / Mazda / Mercury Models

Perfect fit & function in my 2010 Escape. About a 45 minute job from start to finish (but not my first time, either)!Plenty of how-to videos on YouTube; even a slightly mechanically inclined person can do this, and save hundreds of dollars over shop rates!You will need: a 10 mm socket, ratchet, and extention, a T35 torx driver, a set of picks, and a panel removal tool if you want to do this right.The hardware you remove will be reused. Don't lose it!And, a little bit of blue Loctite on the bar nuts and motor screws can't hurt. Not on the two screws that screw to the window, tho!

Easy to install and worked perfectly for my 2012 Ford Escape.

Very fast shipping. Quality replacement. Fit perfectly. No issues at all! Wiring plug matched and very smooth up and down. Local parts shop wanted $40 more for off brand part. Line up with bolts and screws matched. Value for the expense.

Everything I've purchased Dorman fits like a glove. And this one gave me the same results. Perfect every time. Thank you.

Easy to install, great replacement

Perfect fit and solved my problem. Amazon driver literally walked up as I was pulling out the old part. Perfect timing and easy repair! I bought an Amazon warehouse deal and it was in better condition than expected.

Worked great on my 2009 Mercury Mariner. Was easy to install. Took about 40 minutes to change out, taking my time.

Installed in 2011 Ford Escape Hybrid Drivers Side, back seat window. Installation went smoothly with help from youtube video. Took about 75 minutes. The only problem was when I tightened the bolts / screws for installation. It felt as if I tightened them any more, they would strip. And I was not tightening them much. They were not as snug as the original unit. The unit did feel firm, and the window operated just fine. Make sure you keep the bolts you remove from the old unit as you will need them for installation of the new unit. When re-installing the door plastics, make sure you pay special attention on the pull up lock and the wire for the window switch.