Cabinet Hardware Jig, King&Charles Cabinet Handle Jig with Automatic Center Punch, Avoid Jitter Caused by Direct Drilling. Use for Handles and Pulls on Drawers/Doors, Perfect Set.

I love this product! It made installing all the handles on my kitchen cabinets an absolute breeze. The built-in center punch is a fantastic feature — it made marking holes quick and precise, and drilling was so much easier once the jig was out of the way.Alignment is easy and repeatable, which meant all of my drawer pulls and door handles came out perfectly straight and consistent from door to door. If you're doing a kitchen or bathroom update, this tool is a total time-saver and well worth the purchase.

The King&Charles Cabinet Hardware Jig turned out to be a huge time saver for my kitchen project. At first, it takes a little practice to get the hang of aligning everything, but once you do, it makes drilling perfectly placed, repeatable holes fast and simple.The jig is made of durable aluminum, which feels much sturdier than cheaper plastic options I’ve seen. It holds up well even when drilling through multiple cabinets and doesn’t flex or wear down. I used it across my whole kitchen, and every hole lined up evenly, giving my hardware a clean and professional look.If you’re tackling a full kitchen or even just a few cabinets, this tool is worth having. It saves time, reduces mistakes, and gives you the confidence that your hardware will look straight and consistent.⭐⭐⭐⭐⭐ (5 out of 5 stars) — solid, reliable, and highly recommended for DIYers and pros alike.

For the DIYer, this is a great jig for precisely locating your cabinet hardware with consistency. There are other more expensive versions out there, but they cost a lot more. This one worked as expected. It’s simple to set up. From the time I opened the box, it took less than 10 minutes to set it up for my first project. Probably would have been half that time if I had actually bothered to read the instructions. Once the jig is set up, marking the holes with the supplied spring-loaded punch is quick. You do need to take a little care with the punch as you can get it at an angle in the guide hole if you’re not careful. I like the method of only using the jig to locate the holes for the punch. The other versions out there show you drilling through the jig bushing. Trying to hold the jig, the cabinet door/drawer and the drill would be tricky. I pre-drilled the 11/64” holes with a 3/32” bit to ensure it stayed aligned with the punch marks. My first project was complete in less than 30 minutes from opening the box. I would definitely recommend this for the DIYer. The jig may not hold up long for the professional installer doing hundreds of pulls each year.I dinged this product 1 star because of the instructions. The product is made in China and the instructions are translated from Chinese (assumption). I see this all the time. The translators, probably software, do a poor job with the English language. The front cover of the instruction pamphlet is titled “Handle Cabinet Haroware Jig”. The next line says “Metric and Imoerial Double Scale”. Then key features are listed that include “Porous Measurement” and “Protable”. The back of the pamphlet says “How to Intall”. There are multiple grammar errors within the instructions as well. These are easily corrected if reviewed by someone that has English as the first language.

I used this tool to replace the hardware on all our kitchen drawers and cabinets (50+ in total). The new pulls required different holes than the ones I was replacing, so I had to align the new fixtures to cover the holes for the existing pulls.Many of the new pulls had 3 screws and getting those properly spaced by measuring and marking each with a square would have taken forever and likely would have resulted in some "misses", given my limited carpentry skills. This tool made the job super easy and relatively fast, and I had no "do overs".I had some hesitation when comparing this tool to other more expensive options due to some of the parts being plastic, but it worked like a champ, and I have zero regrets not opting for one of the more expensive all-metal options. The jigs locked in place and did not move once set and I was able to install all of the pulls of the same size without further adjustment. I will note that rather than measuring the distance between the holes and using the scale on the ruler, I just used the mounting screws for the pulls through the jig holes to align the spacing and lock the jigs in place. To make sure I was properly aligned with the existing holes I needed the new pulls to cover, I inserted a punch through the jig into one of the existing holes, then set the depth gauge and that worked great.The spring-loaded punch made easily identifiable dents that made locating each hole easy. I used a Milescraft Drill Block to make sure I drilled the holes straight and true and I think that helped me keep all holes properly aligned and spaced. Just make sure your drill bit is long enough to go through the Drill Block and the cabinet or drawer.

This was so worth the price for marriage insurance! Doing DIYs can sometimes lead to fussing with my husband but this little $45 contraption worked perfectly making a job neither of us wanted to go so smoothly! I can’t recommend it enough! We got the aluminum version and would be happy to pay whatever price to have it again! So easy to use, works perfectly! I can’t say enough good about it!

The media could not be loaded. Great tool saved me an enormous amount of time, easy to use and well built, great investment for the novice as well as the experienced pro

The product is ok. It made the job easier but the center punch is terrible.

Works great. Whereas the Kreg Cabinet Handle jig doesn’t have measurements for left/right, this jig has vertical and horizontal adjustments, allowing for repetitive and consistent installs. The stopper does great for installing on cabinet doors.Would recommend considering a drill guide rather than the punch, but the punch does allow for a smaller pre-drill for clean holes.