Is this an exact replacement for a 2005 yamaha t50 tlrd?

Hi There, First, I assume your ignition switch is on a dashboard?? And your 50hp is not a tiller steered system?? This switch you are looking at is a "704" model - goes across a ton of marine / engine applications (Yamaha). 1. If the face plate is the same on your boat it is likely the one, (ignition key on top / Emerg. kill switch on bottom..) 2. pull off the access panel or look to where you can see the wiring under the dash (from the back of the switch..) 3. if it is a 704, you will see a large round harness (8 pins / female side) that hangs down and that snaps together with the male wiring plug that feeds to the boats electrical system 4. If it is a 704, you will also see 4 individual wires (GREEN , BLACK , RED , YELLOW) they plug into the color coded / corresponding wires that go to the boat as well. Very straight forward. * both of the items noted in points 3 and 4 are in the photos on the Amazon add. You can see what I am talking about.. Lastly, the cheaper non-Yamaha / Aftermarket / $50-60 version 704's have many reviews that note the plate is tad larger than the original Yamaha OEM switch. You may/will have to drill additional holes to mount it to the dash, I note this in my review. I spent and extra 100.00 for the OEM switch and for that reason - extra holes issue. Make sure to disconnect you main battery before unplugging and plugging the new switch -- reconnect the battery once you are done. Hope this helps..

Will this work for a 2020 200hp yamaha v4 four stroke?

Hi Nicole .. I have a 2008, 250 V6 4 stroke and this was compatible with that engine.. Here is the advice i gave to another inquiry .. hope this helps.. First, I assume your ignition switch is on a dashboard?? This a "704" model ignition - goes across a ton of marine / engine applications (Yamaha). 1. If the face plate is the same on your boat it is likely the one, (ignition key on top / Emerg. kill switch on bottom..) 2. pull off the access panel or look to where you can see the wiring under the dash (from the back of the switch..) 3. if it is a 704, you will see a large round harness (8 pins / female side) that hangs down and that snaps together with the male wiring plug that feeds to the boats electrical system 4. If it is a 704, you will also see 4 individual wires (GREEN , BLACK , RED , YELLOW) they plug into the color coded / corresponding wires that go to the boat as well. Very straight forward. * both of the items noted in points 3 and 4 are in the photos on the Amazon add. You can see what I am talking about.. Lastly, the cheaper non-Yamaha / Aftermarket / $50-60 version 704's have many reviews that note the plate is tad larger than the original Yamaha OEM switch. You may/will have to drill additional holes to mount it to the dash, I note this in my review. I spent and extra 100.00 for the OEM switch and for that reason - extra holes issue. Make sure to disconnect you main battery before unplugging and plugging the new switch -- reconnect the battery once you are done. Hope this helps.. see less

Desertcart Logo

Join PRO & Unlock Exclusive Perks!

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan

Customer Services

About Us

Customer Support

Desert Online General Trading LLC

Warehouse # 7, 4th Street, Umm Ramool, Dubai, 30183, Dubai

Reviews

D**N

OEM Quality

Easy to install and appears to be good quality and a lot better price than a boat dealer. Only used it a few cranks but so far so good. A bit more expensive than the generic parts but it gives me a since of comfort when out on the lake with less chance of being stranded.

11.04.2024

H**D

Perfect replacement

Perfect replacement however slightly longer than original which requires drilling 2 new holes. Worked well

2.09.2023

T**0

You may pay a bit more for this one - but no re-drilling relative to knock off products.

Yamaha F250 / 2008 - Bay boatNo re-drilling relative to knock off products and easy to install.. Make sure you disconnect your main battery before doing the exchange. When you go to screw the plate to the dash, put this strip of silicone caulk on the dash where the plate will mount - will keep water from draining between Plate and the dash and console.

30.07.2022

T**S

It is a Yamaha OEM product.

Perfect fit.

2.07.2024

A**H

Saved the day!

We bought our boat used and after unloading the boat into the water and it not starting right before vacay this new ignition saved the day. The boat previously had an after market ignition which completely went out. We were scrambling to find out what was wrong with the boat, had a boat mechanic on the phone troubleshooting and when he found out it was aftermarket he told us that’s the problem. Sure enough it was. We got this in two days and installed it and the boat was back to working just in time for vacay where we were going to fish using noodles to catch catfish for our church fish fry. If you are considering buy this but it’s more than an aftermarket spend the extra money you won’t regret it because you don’t want to be cancelling trips due to your boat not starting simply because the key won’t turn.

23.08.2023

Manufacturer	Yamaha Motor
Brand	Yamaha Motor
Product Dimensions	22.86 x 17.78 x 22.86 cm; 0.28 g
Item model number	704-82570-13-00
Manufacturer part number	704-82570-01-00
Lift type	ON-OFF
Voltage	12 Volts
Wattage	3000 watts
Item Weight	0.28 g

Yamaha New OEM PANEL, MAIN IGNITION KEY SWITCH ASSY 704-82570-11-00; 82570-12-00

Details

Description

Specifications

Reviews

Common Questions